1. Practical training report practical training content
1. Grouping preparation: students are free to combine 3-4 people in a group, and divide the work among themselves.2. Investigation preparation: students will go to the investigation of the enterprise to collect relevant information.
3. Commodity circulation cognitive survey: to go to the circulation of enterprises to investigate. Examination of their store location, store layout, merchandise display, customer service and so on.
4. Summarize and evaluate: write the experience of the activity and write a report.
This practical training *** lasted 5 days, every day has different content and tasks. We ourselves free grouping, our group has 4 members. Practical training on the first day of practical training tasks: to collect information related to Shiqiaopu xx supermarket, to prepare for the field research to xx supermarket. The second day of the task: continue to collect information, but make a research report, set out a simple investigation of the content, targeted investigation, our group intends to investigate its 7 aspects: 1) the location of the supermarket 2) the price of goods 3) the business model 4) the display of goods 5) the independent brand 6) the variety of goods. Day 3: We went to XX Supermarket for field research. Led by the staff, we visited, the warehouse, the outlet and other places. We learned that the receipt of goods to enter the store need to go through the process (receipt of goods into, commodity inspection, turnover, stocking, into the store, return). xx supermarkets to implement the closed management of the pick-up process, closed management of the inventory process.
The content of the training: we learned about the xx supermarket information made into a PPT, our group's PPT content is roughly divided into seven aspects: 1) supermarket introduction 2) supermarket site 3) scale of operation merchandise display: the best-selling products are placed in the most conspicuous place 4) warehouse management 5) types of goods 6) private brand 7) training summary.
2. Practical training report training content
Garden arboriculture refers to the nursery from the beginning until the trees decline, renewal of this longer period of cultivation practice. The level of garden tree cultivation level directly affects the role of trees in the role of gardening and greening construction. Garden trees, especially trees as the main body of the natural or artificial plant community growth and development, with obvious improvement of the environment, ornamental, recreation and economic production of the comprehensive benefits. Therefore, the practical training of garden tree cultivation and maintenance is very important. This tree transplantation we are also very serious, through the teacher and technical personnel to explain, we also mastered some of the methods of tree transplantation.Large tree transplantation refers to the transplantation of large trees with a tree diameter greater than 15cm. Large tree transplantation can quickly achieve greening, landscaping garden effect, but also to protect the city in the reconstruction and expansion project of the old and famous trees and the existing large trees of the effective means.
The teacher divided the group members, each group with a hoe rowan digging designated seedlings, we are a chest diameter of about 8-10cm laurel tree. Before transplanting, we removed the topsoil around the trunk to reduce the amount of unnecessary soil. We drew the boundary line of the soil ball, dug an operation trench outside the line of the soil ball, excavated downwards, cut off the lateral roots with a sharp shovel and a hand saw, the shape of the soil ball should be big at the top and small at the bottom, gradually started the line to close the bottom, and finally sawed off the main roots. The ball should be trimmed so that it is symmetrical and even all around. The surface of the ball should be dense and complete, and cracked roots should be shortened to keep the cut smooth. Determine the soil ball of the tree for the seedling chest diameter of 8 to 10 times, the thickness of the soil ball is not less than 2/3 of the diameter of the soil ball, when digging encountered coarse roots can be cut off with a sharp saw or shovel.
Soil ball bandage will first re-tie the grass rope so that when using the grass rope will not be scattered, and then according to the figure shown in the order of numbers, from 1 to 2, around the bottom of the ball of soil, through the 3 over the surface of the ball of soil to 4, around the bottom of the ball of soil through the 5 pull through the surface of the ball of soil to 6, around the bottom of the ball of soil, through the surface of the ball of soil by 7 to 8, around the bottom of the ball of soil, through the surface of the ball of soil by 9 to 10, around the bottom of the ball of soil to return to the 1. According to the order of so tightly next to the flat bandage 6-7 pentagrams. -7 pentagrams. Packing should be dense, firm, to prevent the soil ball from falling apart. In order to facilitate the excavation, prevent branch damage, improve the survival rate of seedlings, transplantation process should be the last crown pruning, reduce the amount of water transpiration of trees to ensure that the trees survive. Pruning to maintain the original crown form as a principle, can be appropriate to prune too dense main and lateral branches, retained lateral branches should be appropriate short cut, you can also remove some of the leaves.
3. Practical training report training content
The actual economic business of the enterprise as the training materials, the use of accounting work in the certificate, accounts, etc. on the accounting of the various steps of the system operation experiments, including the establishment of the account book and the beginning of the balance of the filling of the original vouchers, vouchers, the audit and filling of vouchers, a variety of account books, registration, reconciliation, closing, and so on.4. Practical training report training content
In the thoracic surgery practical training period, through the xx teacher's help and guidance as well as their own practice, I mastered the thoracic surgery of the rules and regulations, conscientious study of phlebotomy puncture and other specialized nursing operations, strict compliance with the thoracic surgery requirements of the principle of aseptic operation, and to further standardize the proficiency of the intravenous infusion, subcutaneous injection, and so on. I have further standardized and proficiently performed basic nursing operations such as intravenous infusion, subcutaneous injection and intradermal injection. Seriously fulfill the duties of training nurses strictly require themselves, respect for teachers, solidarity with students, care for patients, not late, not leave early, down-to-earth work, and strive to achieve standardization of nursing work, the combination of theory and practice, the training period, always "love, care, patience" as the basic, and strive to "eyes, hands, feet, mouth" wholeheartedly for the patient to provide quality service, strict implementation of the three checks and seven pairs, strictly abide by the system of the department, on time and on schedule, the patient's health care system. Strictly abide by the system of the department, on time to participate in the nursing room, through their own hands-on practice, I learned a lot of textbooks do not have the knowledge.5. Training report training content
According to the relevant international trade laws and practices, combined with the actual situation in China and international trade practices, to the basic process of export trade as the main line, to simulate the setting of the specific export commodities transactions as the background, for export trade in the drafting of business correspondence, accounting for commodity prices, negotiation of trading conditions, The course focuses on the main business operation skills such as drafting business correspondence in export trade, accounting for commodity prices, negotiating trading conditions, signing of purchase and sale contracts, consignment and booking of export goods, customs clearance, reviewing and modifying letters of credit, and producing and reviewing trade documents.6. Practical training report training content
(a), the foundation plate and foundation beam reinforcement binding1. According to the pop-up steel position line, first lay the bottom of the plate reinforcement. According to the force situation of the base plate, decide which direction of the lower layer of reinforcement steel below, in general, first paved short to the steel, and then paved long to the steel.
2. Place the bottom plate concrete protective layer with mortar pads, pad thickness is equal to the thickness of the protective layer, according to the distance of every 1m or so can be reduced, and even mortar pads can be replaced with iron.
3. If there is a foundation beam on the base plate, it can be tied and shaped in sections and then installed in place, or tied and shaped in place according to the beam position line.
4. Base plate reinforcement such as tied joints, reinforcement lap length and lap position should be in accordance with the requirements of the construction specification, reinforcement lap should be wire in the center and the ends of the tie. If welded joints, in addition to welding regulations should be taken in accordance with the provisions of the specimen, the location of the joint should also comply with the provisions of the construction specification.
5. According to the pop-up wall, column position line, the wall, column into the base of the insertion bars tied firmly, inserted into the base depth to meet the design requirements, the length of the dumping should not be too long, and the upper end of the measures should be taken to ensure that the dumping of the bar is vertical, not skewed, tilted, dislocated.
(ii) beam reinforcement binding
1. Draw the hoop spacing on the beam side template, and place the hoops.
2. First wear the main beam of the lower longitudinal stress steel and bending steel, the hoop according to the spacing has been drawn one by one separate; wear the secondary beam of the lower longitudinal stress steel and bending steel, and a good set of hoops; put the main and secondary beams of the frame; a certain distance between the frame of the bar and the hoop tied securely; adjust the hoop spacing to make the spacing in line with the design requirements, kidnap the reinforcement, and then tied the main reinforcement, the main and secondary beams at the same time with the work.
3. Frame beam upper longitudinal reinforcement should run through the middle node, beam lower longitudinal reinforcement into the middle node anchorage length and extend the length of the centerline to meet the design requirements.
4. Hoop bar in the overlap of the hook, in the beam should be staggered tie, hoop bar hook for 135 °, straight part of the length of 10d, such as made into a closed hoop, one-sided weld length of 5d.
5. Beam end of the first hoop bar should be set in the distance from the edge of the node of the column node at 50 ㎜. The intersection of beam end and column should be encrypted to meet the design requirements.
6. Lap joint of beam reinforcement: when the diameter of beam reinforcement is equal to or greater than 22mm, welded joints are preferred, and when it is less than 22mm, tied joints can be used, and the lap length should be in accordance with the provisions of the specification. The distance between the end of the lap length and the bend of the reinforcement shall not be less than 10 times of the diameter of the reinforcement. The joint should not be located in the component bending moment, the end of the ligated joint of grade Ⅰ reinforcement in the tensile region should be done with a curved hook (grade Ⅱ reinforcement can not be done with a curved hook), and the laps should be tied at the center and both ends.
(C), plate reinforcement binding
1. Clean up the debris above the template, chalk on the template to mark the main bar, distribution bar spacing.
2. According to the spacing, first put the force reinforcement, and then put the distribution bar. Pre-embedded parts, electrical conduits, pre-drilled holes, etc. in time with the installation. Bidirectionally stressed plate, short-direction reinforcement in the lower, long-direction reinforcement in the upper.
3. When there is a slab with beam in the cast-in-place slab, the beam reinforcement should be tied first, and then the slab reinforcement should be placed.
4. put the mortar pads under the reinforcement, with a spacing of xxm. the thickness of the pads is equal to the thickness of the protective layer, and it should meet the design requirements, such as when the design is not required, the thickness of the protective layer of the slab should be 15mm, and the requirements for the length of reinforcement laps and the location of the laps are the same as that for the beams mentioned in the previous section.
7. Training report training content
Processing due to the attention of the matters:a, the work must be focused, not allowed to leave the machine tool.
b, the workpiece and the lathe need to be clamped firmly, so as not to hurt the workpiece and the lathe fly out.
c. When the workpiece is rotating, it is not allowed to measure the workpiece.
d. After the workpiece is installed, the three-jawed wrench must be removed, so as not to accidentally start the lathe, so as not to fly out of the wrench hurt.
1, take material: according to the requirements of the drawings to select Φ32 100 mm long 45 outline bar.
2, according to the requirements of the drawings for the selection of embryonic materials and rationalize the processing order.
3, tool installation: use the tool wrench to twist the screws on the tool holder, and put the 90° hard right offset cutter into the tool holder with 65° right offset. Use the height of the top head to adjust the height of the tip of the cutter, after adjusting and the screws on the tool holder with a tool wrench to tighten, cut off the installation of the knife and the 90 ° hard right offset knife installation method is the same. After the tool is installed, the handle on the tool holder is twisted tightly to fix the entire tool holder, so as not to slacken the tool holder during processing, which is not conducive to cutting.
4, the installation of materials: three-jaw key will be three-jaw self-centering chuck twisted open, the material will be mounted on the clamp. Then use the three-jaw key to twist the self-centering chuck, take down the three-jaw key. Power on to check whether the material in the rotation of the swing phenomenon, such as swing phenomenon, shut down the machine to adjust the material, after adjustment in the power on to check whether the material is still swing phenomenon. Until the material in the rotation of no swing phenomenon can be processed.
5, ready to use in the processing of tools such as vernier calipers, drawings placed in a convenient place to take, in order to facilitate the use.
6, ready to start processing the blank material, to analyze the process. Processing sequence should be roughing, semi-finishing, finishing.
7, due to the high precision requirements of stepped shaft machining, so in the process of machining to stop constantly, with vernier calipers to measure the size, to ensure that the size requirements. When the workpiece is rotating, it is not possible to measure the size, and it is also impossible to touch the workpiece with your hand, so as not to break the vernier caliper and hurt your hand.
8, after the workpiece cutting, turn off the machine tool, wait for the workpiece to stop naturally, and then use the vernier calipers to measure the size requirements on the drawing, the size of the correct, in the boot for the cut-off knife in the cut-off place to cut a groove, chamfering in the front and back end. And then cut off the workpiece, and then stop.
9, the car will be good stepped shaft with a scribing needle and straightedge on the keyway scribing line positioning.
10, use the movable wrench to loosen the screws on the milling machine to fix the workpiece, clamp the workpiece, and locate the transverse workpiece table and longitudinal workpiece table on the milling machine. After positioning, start the milling machine to mill the keyway.
8. Practical training report practical training content
The annual accounting statements of the enterprise as the training materials, the use of risk-oriented auditing model for systematic operation of the experiments, including the acceptance of the audited unit's entrustment, the signing of the letter of engagement, the preparation of the audit of the overall strategy and the specific audit plan, the use of checking the records or documents, inspection of tangible assets, observation, The main audit procedures such as inspection of records or documents, inspection of tangible assets, observation, questioning, correspondence, recalculation, re-execution and analytical procedures are used to collect sufficient and appropriate audit evidence and prepare audit working papers. Finally, we organize, analyze, identify and summarize the audit evidence to form an appropriate audit opinion and issue an audit report.
9. Practical Training Report Practical training content
Group practice microcomputer hardware assembly, learning the use of commonly used tools, commonly used to eliminate the static electricity method, to master the skills of assembling computers and assembling assembly assembly precautions, bear in mind the disassembling process of the law of taboos.10. Training report training content
The use of infusion pumps, micro pumps 11. 2, air cargo process and operation. 3, the simulation of some important documents to practice filling production, such as letters of credit, air waybill, consignment note, insurance policy, ocean bill of lading and so on. 12. Practical training report training content (a) What is social etiquette? 1, social etiquette is a code of moral behavior. 2, the direct purpose of social etiquette is to show respect for others. 3, the fundamental purpose of social etiquette is to maintain the normal order of life in society. 4, social etiquette requires compliance, (2) Why learn social etiquette 1, learning social etiquette is conducive to improving psychosocial tolerance. 2, learning social etiquette can improve the quality of humanity. 3, learning social etiquette and is conducive to strengthening civilized behavior, improve the quality of civilization, and promote the construction of socialist spiritual civilization. Practical training project two: (a) classroom etiquette knowledge: 1, class: the bell ringing students should be sitting upright in the classroom when the announcement of the class, you should quickly stand up to the teacher to greet the teacher, and then sit down after the teacher answered. Should be on time to school. 2, listen to the lecture: in the classroom, listen carefully to the teacher's lecture to answer questions in Mandarin attitude to be generous. 3, after class: when you hear the bell, all students still need to stand up and say goodbye to the teacher. After the teacher leaves the classroom, students can leave. (B) dress and instrument etiquette knowledge: Dress refers to wearing clothes, pants, shoes and socks. Its basic requirements are: fit; timely; neat; generous; pay attention to the occasion. (3) Respect for teachers etiquette knowledge: Students should take the initiative to greet teachers when they meet them on campus. When students enter the teacher's office or dormitory, they should knock first. The teacher's belongings are not to be looked at casually. Students should refrain from commenting on the teacher's appearance and clothing, and respect the teacher's habits and personality. (D) knowledge of etiquette among classmates: Classmates can call each other by their first names, but they cannot address their classmates with impolite terms. If you want to ask for help from your classmates, you should use polite words. (E) knowledge of assembly etiquette: The assembly is usually held in the playground or auditorium, the demeanor should be solemn. (F) school public **** occasion etiquette: Should consciously keep the campus neat and clean, do not public **** occasion littering, not damage public **** property.