1, the main common several kinds of human body static electricity comprehensive testing methods are as follows:
(a) Simple human body comprehensive static electricity tester.
This way for the old universal way, but because there are many shortcomings and loopholes mentioned above, and man-made records are more difficult to get the trust or win the commission customer satisfaction and trust, has been slowly not accepted by customers. Professional OEM and manufacturing companies have gradually upgraded to anti-static access control systems.
(ii) human body tester + access control or electronic access control.
This way for the human body antistatic test further combined with access control to strengthen control methods. Combined with the three-stick gate (triple gate), wing gates or electronic door locks, etc., by the electrostatic tester test passes sends out an open signal to the electronic door locks or channel, the test passes before releasing or opening the door. By combining the three-stick gate (trident gate) channel control for the more common, although it is strengthened by access control, but the disadvantage is that you can not know the ESD test statements, and test shoes or full test must be manually dialed code way to carry out the management of the more inconvenient.
(c) Comprehensive Human Body Tester + ESD card access control system + ESD report management software.
This way for the human body antistatic test further combined with the card and software control. As some customers check the focus on ESD reports to verify whether the personnel every day really ESD anti-static test, do not accept manual checking of human reports or management to refine the management approach; therefore, some larger enterprises due to the entrance to the site is limited, too many people, or the entrance to the more costly considerations, focusing on the ESD test records report and database management, can produce departments or personnel ESD Test reports and analyze the test status, saving manual management costs and report checking, using this approach, the disadvantage is that it can not be implemented in a timely manner to avoid untested personnel into the anti-static area, but can rely on ESD reporting software automatically Email test abnormal personnel reports and should be tested without testing personnel reports to notify the administrator to make the appropriate treatment.
(d) human body tester + access door + ESD card access control system + ESD report management software.
This way, is the best of both worlds to strengthen the control and information management. ESD test records can be managed and various applications. It is the most appreciated way for customers and management. The main system architecture is as follows:
2, the human body integrated tester + channel door + ESD card access control system + ESD report management software. The main features of this method are
1. Brush card identification, no card alarm, to prevent deliberate circumvention or intrusion, the overall anti-static benefits.
2. Combined with the three-stick gate (trigeminal gate) or wing gate channel has a mandatory detection of good control functions, to avoid the failure of the access control personnel do not test or electronic gate control a person to test a number of people mixed into the situation.
3. Swipe card system optional induction card recognition or fingerprint recognition, card recognition types include common Pegasus, EMID, Mifare, HID and other kinds of cards, can be used along with the original staff card for a card line.
4. Can be set according to the card authority to make different pass conditions, such as VIP or management leaders only need to brush the card legal can pass through the channel, the office staff need to anti-static shoes test passed to enter, and the workshop assembly workers need to be hand shoes all static electricity test passed before passing the channel. It also avoids the inconvenience of the traditional tester which needs to manually dial the code to adjust the hand-shoe test.
5. Hand, left and right foot shoes with their own independent testing and results display, no personnel grounding blind spot, accurate and in line with international norms.
6. The card machine has a high-brightness LCD screen, which clearly shows the test time, card number, work number and test results, including hand and shoe error messages, so that employees can intuitively know the error messages.
7. The alarm is issued when the test card is not swiped, reminding new employees to adopt the correct test steps to avoid time-consuming and backward wrong brush situation.
8. Scientific information management, accurate and effective, 100% paperless records, ESD card swipe host memory automatically log the test results to prevent human error, automatically generate a complete ESD test management report.
9. Each test is stored in the database file, resulting in management reports in addition to qualified entry and illegal card, time zone control or holiday control prohibited entry records, but also contains the hand, left and right shoe test abnormal results, the real ESD statements can be used for customer inquiries to track and check, non-general access control statements only show whether to enter.
10. The test results can be customized to link with attendance as the basis for attendance or HR personnel software linkage to automatically update the new or departing personnel.
11. Test data can be customized and uploaded to a specified directory for attendance or other software data application.
12. ESD test pass report, untested personnel report (according to the department or shift), test exception report (according to the department or shift) can be automatically emailed to the manager at regular intervals.
13. Automatic data backup and automatic cleanup at regular intervals.
14. Real-time monitoring, ESD swipe card equipment abnormalities automatically notify the administrator by Email.
15. The system can be independently offline or real-time online monitoring ESD test comparison, hardware testing time of 2 to 3 seconds, fast response to avoid congestion.
16. ESD tester test for touch, avoiding the traditional tester button easily damaged shortcomings.
17. Static tester foot pedal for the feet separate design in line with international norms, so as not to test the vulnerability caused by electrostatic discharge injury.
18. Static tester and the card machine between the signal connection line for the detachable, convenient static tester to send inspection when disassembled.
Pegasus ESD anti-static access control system (human body integrated electrostatic test data management access control system) is a combination of electrostatic testing and electronic access control systems and computerized management software advanced products; in many settings of anti-static areas (EPA) in the premises, electrostatic footwear and electrostatic wristbands are tested in the traditional way of manual logging or supervision, it is not easy to implement and carry out, even Errors abound, it is difficult to obtain the trust of customers and management, but also the formation of personnel static grounding great potential loopholes; anti-static access control system for these shortcomings, put forward a direct and effective solution to ensure that the operating personnel in the EPA area when entering the staff has really done a good job in preparation for static grounding; and can be combined with an optional three-roller gate as a flow of people to do the channel control equipment. Can provide an orderly and civilized way of passage for the entry and exit personnel, to eliminate illegal entry and exit, and in emergencies, rapid control of the falling rod, the organization of personnel evacuation.
ESD anti-static access control system and the traditional ESD test comparison: traditional test ESD anti-static access control system ESD static requirements are not high, the surface to cope with the environment Suitable for static requirements rigorous, the pursuit of effectiveness and the image of the environment is not mandatory, it is easy to mix the pass, but the beginning of the surface cost is low Mandatory testing, not the card alarm, and legal access to the identity of the identity, to prevent the intentional avoidance or intrusion, the overall anti-static benefits of artificial paper, paper, paper, paper, paper, paper, paper, paper, paper, paper, paper, paper, paper and paper. Overall anti-static efficiency Manual paper records, errors and omissions, mistakes, human errors, manual reports are not easy to generate, unable to grasp the time 100% paperless records, host memory automatically log results, prevent human error, automatically generate complete test management reports Loose management, control is not easy, errors, it is difficult to win the trust or commissioned customer satisfaction and trust Scientific information technology management, accurate and effective. Ensure work area access and floor cleanliness monitoring, win the complete trust of customers and management Two feet together at the same time test, as long as one foot is normal will be passed, the formation of personnel static grounding blind spot, and does not comply with international standards Hand, left and right foot footwear independent testing and results display, there is no personnel grounding blind spot, accurate and in line with international norms Can not be set to test the rights of the individual, the VIP card or cadre card or foot injuries can not be employees Setting up a personal only test feet or test hands or exempted from the test of the expediency of each card, can be based on the authority to make the classification, you can only test hands, feet, full test, exempted from the test, etc. to make the corresponding expedient management How to buy a good ESD antistatic access control system?
Tens of thousands of dollars of ESD access control systems, users and service providers should pay attention to what matters when selecting? Division I often encountered some users have been built because of the ESD anti-static access control system, the system is not stable, the software is not standard, the function can not be upgraded, high service management costs, the need to re-establish the cost of increased distress, will be heart to heart to put forward a number of suggestions to customers in the procurement of this system products conscience:
Recommended to choose the auto-identification hardware and software professional manufacturers:
Based on the ESD The main core of the data management system lies in the authority logic judgment hardware and back-end data management software rather than just in the electrostatic tester. And most of the electrostatic tester belongs to the mature and stable mass production of products, in order to seek the stability of the overall anti-static access control system, should choose the automatic identification of products developed by professional manufacturers of the system products, so as to avoid automatic identification and data management problems, resulting in the system is not stable or the problem is delayed and can not be dealt with the lack of real-time, and the customer must be free of the use of the strong or the cost of purchasing the cost of the various expenditures. This is a common problem for users.
It is recommended to choose a longer and more mature anti-static data management system products:
Anti-static products are more mature products, but mainly in other products such as static testers, anti-static equipment, anti-static flooring, ionic fans, and other types of products. And anti-static access control test data information management products in this area of the development of a relatively short period of time, but also involves hardware and software systems, so ESD anti-static data management readout system relative to other anti-static products have been more mature need to be more stringent standards in order to achieve system stability. Need to choose the development of a longer period of time, the actual experience of more products, so that users choose to use the new product after the pilot to pay more management costs or must be the second cost of re-establishment.
It is recommended to choose a mature and stable products with a number of actual cases, refused to be fooled:
ESD anti-static access control system started late, some suppliers used to take the case of other manufacturers to mix and match the packaging of their own products to attract customer eyeballs to purchase the way of great publicity, or the actual experience is not enough, the test of the new product packaged into a sophisticated experience of mature products to fool the intermediary or the user; or even to fool the customer to choose to use the new product experimenters pay more management costs or have to secondary costs to rebuild. Users; or even fool customers with many years of experience, not really have more than one actual use of customers or only a few experimental customers, or anti-static products, lack of experience, product instability or interference in the case of misjudgment, the product assembled after the integration of emergency push to the user, resulting in a waste of user after-sales management of manpower and time costs, so you should choose the product of many years of experience is relatively stable, refuse to buy experimental and case of fooled! Products, so that the use of worry-free.
It is recommended to choose strictly own hardware and software technology manufacturers:
ESD anti-static access control system suppliers, many in the automatic identification system entrusted to others to develop their own products packaged, or insufficient R & D team or the owner itself did not participate in the development of technology, resulting in the flow of research and development personnel of the system maintenance risk. Resulting in users have system upgrade requirements and DEBUG must wait or have problems can not be dealt with, and even when the system is installed and adapted to the seller will need to spend a lot of time repeated tests delay customer inspection and user use, which is also a common problem encountered by users.
It is recommended to choose a brand awareness and sustainable manufacturers:
ESD anti-static access control system supplier manufacturers, whether it is static tester manufacturers or access control system manufacturers are usually small and medium-sized enterprises (SMEs), while the service of the professional user side of the large enterprises are usually. The average life expectancy of small and medium-sized enterprises is only 5 to 10 years, if you do not have to choose a supplier with a sustainable business, integrity of service, otherwise in the anti-static access control equipment manufacturers are not as popular as the access control system is so popular, it is likely to encounter after-sales service is not the case. So buy the product also have to buy the service guarantee, large enterprises in the selection of suppliers need to choose a brand awareness, product stability, own technology, sustainable management, integrity services, the market test was established for a long time manufacturers as a supplier, relative to have a better product protection.