What is a time control switch? He is a control device for power switch, home appliances and industrial appliances can be used, and the use of a very safe and can save electricity, in our lives always in an unexpected way to help us a lot of help, sometimes we do not notice his importance. But there are many people on the time control switch set the steps and not too familiar, below, I'll teach you how to set the time control switch, and what we should pay attention to when using the time control switch.
Time control switch set timing steps
1, first check the clock display is consistent with the current time, such as the need to re-qualify, hold down the "Clock" key at the same time, to see whether the time shown on the display and the current time. Press and hold the "school week", "school time", "school minutes" key, the clock will be adjusted to the current time;
2, press the "Timing" key, the left side of the display screen, the clock will be adjusted to the current time. Then press the "school week" to select the five-day work system, the same daily, daily different work modes, and then press the "school time", "school minutes" key, enter the required time to open;
3, and then press the "Timing" key, the lower left side of the display appears "1 off" (indicating the first off time), and then press the "school week", "School time", "school minutes" key, enter the date and time of the desired closure;4, continue to press the "Timing" key, the lower left side of the display will be shown in turn "2On, 2Off, 3On, 3Off, ......, 10On, 10Off", refer to step 2 and 3 to set up the switching time for the following times.
5, if you do not need to set 10 groups of switches per day, you must press the "Cancel/Restore" key to eliminate the time of the extra groups, so that it shows "-:-" pattern on the display (not 00:00);
6 Timing settings are complete, you should press the "clock" key, so that the display shows the current time;
7, press the "auto/manual" key, the display below the "?" symbol to "auto". The "?" symbol under the display will be adjusted to the "Auto" position, at this time, the time control switch can automatically open and close the circuit according to the set time. If you need to turn the circuit on or off temporarily during use, simply press the "AUTO/MANUAL" key and set the "?" symbol to the corresponding "ON" or "OFF" position. The "Auto/Manual" button is used to move the " " symbol to the corresponding "On" or "Off" position.
Precautions for using the timer switch
1. Do not use this timer switch on equipment (e.g., medical equipment, large-sized equipment, etc.) that could be involved in a fatal accident or that could have a significant impact on society due to an error in the timer switch.
2. For equipment (such as large heaters and cold rooms) where major property damage may occur due to an error in the timer switch, be sure to use the timer switch with sufficient margins for characteristics and performance, and take safety measures such as using a double circuit.
3. Do not repair, disassemble, or remodel the product by yourself, but rather entrust the repair or inspection to a dealer or a company in charge of remodeling.
4. Do not touch the terminals when the power is turned on.
5. This switch is designed to operate in an environment free of moisture, corrosion, and high metal content gases. Do not expose to oil or water.
Our new time control switch generally need to set the right time, if you do not know how to set up, then you can refer to this article about the steps, step by step can be used normally, or you can read the manual yourself to complete the setup, the method is not difficult. We should also pay attention to the use of time control switch do not have cross time settings, should be in order, and the switch as far as possible do not use in the wet or other liquids, to avoid causing unnecessary safety issues occur.