Scoliosis correction (shape) support

1, do not take the mold is best not to do, the normal process of scoliosis brace is to take the plaster negative mold, and then filled into the plaster positive mold, rest, and finally to get an ideal brace. The method of not taking the model is usually made into a Boston type, and this type of brace has poor orthopedic strength and little reserved space.

2, Lyon support is best not to do, Lyon support adjustable, breathable. But there are two big disadvantages, one is that the spine is blocked by the metal branches when taking pictures, and it is difficult to judge the orthopedic effect. The second is that the overall orthopedic effect is not good because the plates are divided into many small pieces. At the same time, the price is speculated.

3, take the type of personnel and repair personnel is not a technician do not do, support the most critical in the repair of the technology of the personnel, but if the repair of the technician have not seen the child, just by virtue of the sheet to do, many times to repair the mold has a problem, do a good job in the support of the natural effect of poor.

4, no nationally registered orthopedic fabricator's license personnel to do the child's brace, it is best not to do. Scoliosis brace belongs to the most complex of orthotics, correcting in three dimensions. Unlicensed personnel have poorer skills and it is difficult to make a qualified brace for your child.