County (city) District Quality and Technical Supervision Department of the administrative region of the measurement of supervision and management.
Economy, public security, transportation, housing, urban management, trade, health, population planning, environmental protection, industry and commerce, safety supervision and other relevant administrative departments should be in accordance with their respective responsibilities to do a good job of measuring the management and supervision. Article V city and county (city) people's government shall measure the work into the national economy and social development planning, encourage and support the measurement of scientific and technological research, promotion of advanced measurement technology and management practices. Article VI of the state to implement the legal unit of measurement system. Engaged in the production of official documents, newspapers, publications, books, radio, television, public **** graphic symbols and product identification and other activities should use the national legal units of measurement. Article VII gradually implement the mandatory verification of measuring instruments, supervision and inspection services outsourcing. In line with the laws and regulations of the metrological verification institutions, research institutions, colleges and universities and other intermediaries with the responsibility to undertake mandatory testing or supervision and inspection, quality and technical supervision departments can sign a mandatory testing or supervision and inspection services outsourcing contract, to clarify the rights and responsibilities of the mandatory testing or supervision and inspection work. Chapter II measurement, calibration and management of measuring instruments Article VIII quality and technical supervision departments in accordance with the requirements of economic and social development, and in accordance with the transfer of quantitative value, traceability and measurement of supervision and management needs, unified planning and organization of the establishment of social measurement standards, as the basis for uniformity of the quantitative value.
Measurement and calibration institutions, the community to provide measurement and calibration service activities (hereinafter referred to as calibration institutions) should establish the appropriate measurement standards, the measurement of standards must be qualified according to national regulations. Article IX of the public standard of measurement, measurement and calibration institutions, calibration institutions using measurement standards, enterprises, institutions using the highest standard of measurement should be mandatory verification.
The city for trade settlement, safety and security, medical and health, environmental monitoring and administrative law enforcement, forensics and other aspects of the work of the mandatory verification of measuring instruments included in the directory, the gradual implementation of free mandatory verification, the costs required by the same level of financial protection. Implementation of mandatory verification of the work of measuring instruments catalog and free mandatory verification of the work of measuring instruments in accordance with relevant national and provincial regulations.
The implementation of mandatory verification of measuring instruments, repair and need to be put into use again, should be re- mandatory verification. Article X directly for trade settlement of residential water meters, energy meters, gas meters, heat meters and other measuring instruments, water supply, power supply, gas supply, heating and other operators should apply for the first mandatory verification. Residential water meters, energy meters, gas meters, heat meters and other measuring instruments for the first time the average error should be less than or equal to zero. Without calibration or unqualified calibration and the average error is greater than zero, shall not be installed.
The previous paragraph of the measuring instruments used by the expiration of the term, the water supply, electricity, gas, heat and other operators shall be responsible for the rotation of the mandatory testing of qualified measuring instruments. Article XI of measuring instruments shall be mandatory verification in accordance with the national metrological verification system table, and the implementation of metrological verification procedures.
The use of the implementation of mandatory verification of measuring instruments units and individuals, should be measured by the statutory body or authorized by the measuring instruments testing agency to apply for mandatory verification of measuring instruments.
Measuring instruments should be certified personnel should obtain the relevant qualifications, licensed, and the use of qualified measuring instruments, in accordance with the measurement of calibration procedures and other relevant provisions of the fair, objective and accurate mandatory calibration of measuring instruments, shall not be falsified calibration data.
Measurement of measuring instruments received by the inspection agency, should be completed within seven working days of the verification; need to extend the verification time, the measurement of the inspection agency and the inspection unit to determine the consultation. With the conditions of on-site inspection, measurement and certification bodies shall receive an application for inspection within 10 working days from the date of completion of the on-site inspection. Article XII of the mandatory verification of other than measuring instruments and measuring instruments for work, the use of units should be self-test or calibration, or sent to the measurement of verification, calibration institutions for verification or calibration.
The verification or calibration of measuring instruments should be in accordance with the verification of measuring instruments or calibration specifications and commissioned the requirements of the contract, and issued to the commissioner of the verification certificate or calibration certificate. Article 13 The calibration institution shall have the following conditions:
(1) a legal personality, able to independently assume legal responsibility;
(2) in the application to carry out the project has the appropriate level of technology and measurement of the management capacity;
(3) with its application to carry out the project of the measurement of the standard devices and ancillary equipment;
(4) with its application to carry out the project appropriate measurement of the standard devices and ancillary equipment;
(4) with its application to carry out the project appropriate measurement of the standard devices and ancillary equipment. (D) the application to carry out the project appropriate measurement and verification personnel and measurement of management personnel;
(E) to ensure that the application to carry out the project can be carried out in the normal working environment and facilities;
(F) the application to carry out the project with its appropriate quality assurance system.
Calibration bodies set up in the administrative areas of the city's representative offices, offices or branches and other non-independent legal organizations, can be engaged in promotional activities related to its calibration services, but shall not directly carry out the measurement of calibration service activities.