Equipment within the plant mobilization or displacement of the said equipment removal. Where the installation and acceptance of the transfer of fixed assets included in the enterprise's equipment, without the approval of the relevant management, are not allowed to dismantle, remove and install.
If the process, production task changes require equipment removal, should fill out the application form for equipment removal by the process technology production department, the original equipment using the department, the equipment transferred to the department countersigning the agreement of the equipment department, and reported to the competent plant leader for approval before the implementation of the removal, and change the layout of the equipment.
2. Equipment transfer
Fixed assets included in the transfer of equipment, must be in accordance with the principle of hierarchical management for approval procedures. Equipment transfer can generally be divided into paid transfer and unpaid transfer of two kinds.
Reimbursable transfer, according to the quality of equipment, from the transfer unit and the transfer unit of the two sides negotiated pricing, according to the relevant provisions of the paid transfer procedures.
Non-reimbursable transfer, due to the transfer of production products or mergers and other reasons, reported to the competent leadership department and the financial sector for approval, can handle the equipment and fixed assets transfer procedures.
The transfer of equipment should generally be idle surplus equipment, enterprise transfer equipment, all accessories, special spare parts and instructions, etc., should be randomly transferred to the transfer unit. As the equipment transfer is a form of property rights changes, in the transfer of equipment should be handled when the corresponding asset evaluation and verification confirmation procedures.
3. Sequestration and handling of equipment
Idle equipment refers to the past has been installed and accepted, put into operation and use and the current production and process temporarily do not need to use the equipment. It not only can not create value for the enterprise, but also occupy the production site, consume maintenance costs, natural wear and tear, become a burden on the enterprise. Therefore, the enterprise should try to idle equipment early use up, really do not need to use the timely processing or into the transfer market.
Where out of service for three months | exams | more than the equipment, the use of the department of the application form for the closure of the equipment, after approval, notify the financial sector to temporarily stop the depreciation of the equipment. Sealed equipment should be cut off from the power supply, careful maintenance, on the anti-rust oil, cover (set) on the protective cover, generally sealed in place. This can make part of the enterprise temporarily unused equipment can slow down the speed and extent of its loss. At the same time to reduce maintenance costs, reduce production costs.
The equipment has been sealed, there should be obvious signs of sealing, and designate a person responsible for storage, inspection. Sealed idle equipment must strengthen the maintenance and management, especially should pay attention to the attached machine, the integrity of the annex.
Where the sealing of more than one year of equipment, after considering the development of enterprises, confirmed that the equipment is not needed, should be filled out a detailed list of idle equipment, reported to the higher authorities to participate in the transfer of surplus equipment utilization. The transfer of idle equipment shall be handled in accordance with the "Management Measures for the Utilization of Idle Equipment in Enterprises" of the Production Office of the State Council. Actively carry out idle equipment processing is a regular important work of the equipment department.
Sequestration after the need to continue to use, should be proposed by the department of equipment use, and reported to the equipment management department for unsealing procedures.