Tie rod cylinder and solenoid valve to be refueled, add ordinary lubricating oil can be.
Because the rubber ring of the solenoid valve is oil-resistant, as for aging, it is bound to age, because it also has a service life. Tie rod cylinder is a kind of tie rod cylinder, such as SCSG series Yadek cylinder. The advantage of the tie rod cylinder is that the load carrying capacity is stronger than the non-tie rod type, and there is not much difference in the specific use.
Cylinder use precautions:
1, air quality requirements
Use clean, dry, compressed air. The air shall not contain organic solvents, synthetic oils, salts, corrosive gases, etc., in order to prevent poor operation of the cylinder and valve. Before installation, the connection pipe should be fully blown and cleaned, do not bring dust, debris, sealing bag pieces and other impurities into the cylinder and valve.
2, the requirements of the use of the environment
In the dust, water droplets, oil droplets, rod side should be equipped with telescopic protective cover. When the retractable protective cover can not be used, the cylinder with a strong dustproof ring or waterproof cylinder should be used. If the ambient and medium temperature of the cylinder exceeds -10～60℃ when using the magnetic switch, anti-freezing or heat-resistant measures should be taken.
In a strong magnetic field environment, automatic switching cylinders with strong magnetic field resistance should be used. Standard cylinders should not be used in corrosive fog, or in the fog where air bubbles appear in the seal.
3, cylinder lubrication
Cylinders used for oil lubrication should be equipped with an appropriate flow rate of oil mist. Do not give the cylinder oil lubrication, because the cylinder is pre-greased, can be used for a long time. This cylinder can also be used for oil draining, but once oiled, it cannot be stopped. When using turbine oil no. 1 (ISO VG32) for oil supply, do not use oil, spindle oil, etc. to avoid double expansion of the Buna-N seals.