Equipment according to the safety requirements connected to the grounding wire, the cleaner should be placed in a clean, dry, corrosive gas environment, to avoid severe vibration, the back of the generator should leave enough space for heat dissipation. Ensure that the ultrasonic cleaner has good contact to avoid personal injury accidents.
2, do not dip your fingers into the cleaning fluid when the cleaning machine is working
It is strictly prohibited to start the machine under no load, ultrasonic cleaning machine must be used before the start of the instructions for the level of the cleaning fluid will be poured into the cleaning tank. The cleaned object shall not be in contact with the bottom of the tank, it is recommended to put the workpiece into the basket cleaning. Cleaning solution must not be strong acid or alkaline, no reliable safety measures, can not use flammable solution. The temperature of the cleaning solution in a year will increase with the extension of continuous work time, ultrasonic cleaning machine should not exceed the specified time of continuous work.
3, equipment using non-flammable cleaning agent
Ultrasonic cleaning machine must be used to ensure that the use of flammable and explosive substances away from the occasion, special circumstances require the use of certain substances, should be the appropriate safety measures. Use must ensure that the tank is filled with a sufficient amount of cleaning fluid. Do not splash water into the electrical control box and related electrical components, and keep them away from water vapor, corrosive gases, dust, and so on. If leakage is found in the cleaning tank, it should be closed and used immediately, and the cleaning liquid should be emptied after contact with the seller. After cleaning the ultrasonic cleaner with the heater, the heater must be turned off before cooling the cleaning fluid and then emptying the cleaning fluid.