Deschmere quartz stone in North China and South China two production base production.
Phase I covers an area of 24,000 square meters, the company introduced six advanced automatic quartz production line, while the introduction of advanced production technology in Guangdong, the use of high quality quartz sand from Heyuan, India, several upstream raw material suppliers have reached a long-term cooperation agreement with the company, on the basis of which developed a multi-family, multi-floral, multi-specifications of the High-end quartz stone.
The product has no radiation, acid and alkali resistance, aging resistance, high strength, high hardness, and does not absorb color. Therefore, it is widely used in family interior decoration, high-end cabinet countertops, laboratory bench, all kinds of hotels, hospitals, shopping malls, airports, office buildings, hotels, restaurants, education and research, medical institutions and other places of higher ground, wall and various work surfaces.
Quartz stone how to produce
1, raw materials collection: glass, quartz, resin and other raw and auxiliary materials procurement.
2, material selection: the use of fans, iron removal equipment, manual selection of granular raw materials in the removal of impurities, iron and so on.
3, batching: after the selection is completed, the material is transported into the mixing system. The materials are fully mixed in the gravityless mixer to eliminate the problem of material color difference and unevenness of particles. After mixing, it will be transported to the corresponding batching bin, and the batching system will automatically batch the materials during production.
4, mixing: unsaturated polyester resin, pigment, additives and granular powder are fully mixed.
5, fabrication: the mixed materials stirred through the conveyor belt, into the fabric truck, and then the fabric truck will be uniformly fabricated into the fabric mold frame.
6, vacuum high-frequency vibration platen: after the fabric is finished, it is transferred to the press equipment, and vibration pressing is carried out under the vacuum condition of -0.1MPa.
7, heating curing and shaping: after pressing, the blank is heated and shaped at 85-110℃ in the curing oven.
8, thickening and polishing: after curing, the blank is cooled down for 24 hours, and then enter the thickening equipment for thickening.
9, Polishing: After the thickness setting is completed, through the 20-head polishing machine, water grinding and polishing. According to different needs, polishing until the gloss reaches 40-70°.
10, inspection: the appearance of the plate quality inspection.
11, cutting board: use longitudinal and transverse cutting, bridge cutting machine equipment to cut the product to the required size.
12, packaging and warehousing: the cut products are air-dried and packaged, and stored in the warehouse
Reference to the above? Deximir official website