1. Simple labor service contract template
Employer (Party A): _______________
Employee (Party B): _______________
According to " "Labor Law of the People's Republic of China", "Labor Contract Law of the People's Republic of China" and relevant national and provincial regulations. Party A and Party B enter into this Agreement in accordance with the principles of legality, fairness, equality, voluntariness, consensus through consultation, and good faith. contract.
1. Term of labor contract
1. This contract shall commence from _______ month _______ day _______ year to _______ month _______ day _______ year Upon expiration of the term, this contract will terminate automatically. With the agreement of both parties, another labor contract can be signed.
2. The probation period starts from _________year_______month_______day and ends on_______year_______month_______day.
2. Work content and working location
Job content: Responsible for the transportation work of ______ department.
Position: Porter.
Working location: __________________________________________________.
3. Labor remuneration
1. Party B’s wages are based on the piece-rate wage system. Party A uses the piece-rate wage unit price and calculation method of the specific transported items as the basis for calculating labor remuneration (loading and unloading charges per tons_______yuan).
2. According to Party A’s piece-rate wage system, Party B’s monthly labor quota and piece-rate unit price will earn labor remuneration not less than _______ yuan.
3. Party A will pay Party B’s salary for the previous month before _______ day of each month. If there is a legal holiday or rest day, the payment will be made to the nearest working day in advance.
4. Wages must be paid in the form of currency and cannot be paid in kind or securities in lieu of currency.
IV. Termination of the Contract
1. This contract can be terminated upon agreement between Party A and Party B. If Party A proposes to terminate this contract, economic compensation shall be paid in accordance with regulations.
2. Party A may terminate this contract under any of the following circumstances:
(1) Party B is proven not to meet the employment conditions during the probation period.
(2) Party B seriously violates Party A’s rules and regulations.
(3) Party B has seriously neglected its duties, engaged in malpractice for personal gain, and caused significant damage to Party A.
(4) Party B establishes labor relations with other employers at the same time, which seriously affects the completion of Party A's work tasks, or refuses to make corrections after Party A's request.
(5) Party B uses fraud, coercion or takes advantage of others' danger to make Party A enter into or change the labor contract against its true intention, thereby invalidating this contract or the change agreement.
(6) Party B is held criminally responsible according to law.
3. Party B shall notify Party A in writing ______ days in advance to terminate this contract; if it is within the probation period, Party B shall notify Party A ______ days in advance.
5. Social Insurance
Party A and Party B negotiate and agree that Party A will handle social insurance for Party B in accordance with the law and pay social insurance fees in full in accordance with regulations. After the labor contract between the two parties is terminated, the social insurance procedures should be transferred in accordance with relevant regulations. If Party B is injured at work, his treatment shall be in accordance with the relevant regulations of the state and the local people's government.
6. Other special agreements
1. If Party B suffers economic losses due to personal negligence during his tenure with Party A, he shall bear certain liability for compensation, and the amount of compensation shall be Party A’s ______% of direct economic losses.
2. Party B shall strictly abide by labor disciplines, Party A’s rules and regulations, and do its own job well. If Party B violates labor discipline and Party A's rules and regulations, Party A may handle it in accordance with the relevant rules and regulations until the labor contract is terminated.
3. During Party A’s tenure, Party B shall not engage in any part-time business related to Party B’s responsibilities without Party A’s permission. If there is any violation, once discovered, Party A has the right to terminate the labor contract and shall not Pay any financial compensation.
4. Party B must obey Party A’s work arrangements and transfers.
5. Party A and Party B shall negotiate the renewal of the contract one month before the expiration of the contract. If both parties do not renew the contract, but the relevant work or business engaged in by Party B has not yet ended, this contract shall be extended to the relevant work or business The day it ends.
7. Dispute Resolution
If a dispute arises between the two parties during the performance of this contract, they can be resolved through negotiation first; if they are unwilling to negotiate or the negotiation fails, they can apply for arbitration to the ______ Labor Dispute Arbitration Committee. .
8. Others
1. For unfinished matters and disputes between the two parties, the two parties will negotiate and resolve them in a friendly and reciprocal manner.
2. This contract is made in _____ copies and shall take effect from the date of signature by both parties. Each party holds _____ copies, all of which have the same legal effect.
Party A: __________________ Party B: __________________
______year______month______day______year______month______day
< p> 2. Simple labor service contract templateConstruction unit (Party A):
Prefabrication yard (Party B):
Supervision unit:
After mutual negotiation between Party A and Party B, Party A decided to entrust Party B with prefabrication. In order to clarify the rights, obligations and economic responsibilities, the following agreement terms have been entered into, and both parties must abide by them.
1. Project summary:
Project name: The contract includes transportation and installation: unit price per piece (yuan); *** (piece), total price ￥ (yuan), capitalized in RMB yuan (cash payment).
2. Contract duration:
This project is required to be completed by a date. Party B shall not delay the construction period without reason. If Party A fails to complete the lower part of the project on time due to insufficient funds, or Party A fails to Ensure that the bridge construction site has three connections and one level (water supply, electricity supply, transportation site) and other reasons. If Party B is unable to hoist the bridge on time, Party A will compensate Party B for the occupancy fee of the beam stacking site.
3. Party B’s responsibilities:
(1) Party B, as Party A’s construction team, contracting workers and machines, shall strictly follow the drawings, technical standards and construction specifications provided by Party A. Construction prefabrication shall be subject to the supervision of Party A's constructors and supervision unit personnel to ensure the quality of the project, and the project quality grade will be qualified.
(2) Party B must organize construction reasonably and effectively in accordance with Party A’s on-site construction deployment and schedule requirements to ensure that it is implemented according to Party A’s production plan without delaying the construction period.
(3) The materials purchased by Party B that constitute the body of the project must comply with Party A’s relevant regulations on material procurement, meet the requirements of Party A’s qualified suppliers, and can only be used after being inspected by Party A and the supervisor. , otherwise, Party A will regard the project using the material as unqualified, and Party B must rework it free of charge and bear all losses and responsibilities caused thereby.
(4) Party B shall ensure that its qualifications and experience are suitable for this project, and provide legal qualification certificates and other supporting documents; Party B is responsible for reviewing the technical requirements, quality standards and work instructions provided by Party A. Responsibilities and obligations, Party B has the right to reject incorrect requirements, standards and instructions issued by Party A. Otherwise, if the project quality defects are caused by any reason or do not reach the quality level agreed in the previous paragraph, Party B shall bear the corresponding responsibilities and cost.
(5) Party B shall rework or repair projects that do not meet the quality level agreed in the previous paragraph and defective projects free of charge, and shall bear all costs incurred thereby. If the quality level stipulated in this contract is still not reached after rework or repair, Party B shall compensate according to the actual losses of the project; Party A has the right to rework or repair unqualified projects and defective projects on its own or by entrusting others to do so. Or the repair costs will be borne by Party B.
(6) If the construction period exceeds the stipulations in this contract due to rework due to project quality, it will be handled according to the breach of contract clause of this contract.
(7) Party B shall strictly conduct self-inspection of concealed projects. After passing the self-inspection, report to Party A's inspection engineer for inspection.
Party A's inspection engineer shall re-inspect the concealed project within 24 hours and submit it to the supervisor for inspection. After passing the inspection and signing, Party B can conceal it. If the inspection fails, Party B shall complete the repairs within the limited time and re-apply for inspection. If Party B conceals the work without inspection, Party A has the right to request re-inspection. Party B will be responsible for the resulting increase in costs and delay in construction period.
(8) Within 35 days after the completion of the project, Party B must also provide qualified test documents and construction diaries for the precast beams (slabs). Be responsible for the safety of prefabricated transportation and installation.
4. Project changes:
If there are any project changes during the construction process, Party A must notify Party B in writing in advance, and the unit price of the increased or decreased project quantity will be based on the agreed price. Pick. If Party A requires changes to the qualified materials that have already entered the site and the original materials cannot be returned, Party A must compensate Party B for losses based on the budgeted price of the materials.
5. Party A’s responsibilities:
Party A should provide the project design drawings and relevant technical documents and other information, and must prepay 50% of the total project price within three days after the contract is signed. Party B purchases the main materials and then pays them in installments according to the prefabrication progress. After the prefabrication of the project is completed, Party A must pay 98% of the total project. Before the last beam (piece, span) is shipped out of Party B's prefabrication site, Party A will temporarily retain 3,000 yuan. In addition to RMB as a deposit for qualified experimental documents and construction diaries, the entire project price must be paid. All taxes and fees in this contract shall be borne by Party A.
6. Unfinished matters can be resolved through separate negotiations or a supplementary agreement can be signed. The compensation agreement has the same legal effect as this agreement.
7. This agreement will take effect from the date of signing and will naturally terminate when all the beams are hoisted and all payments are settled.
8. This contract is made in two copies, with each party holding one copy.
Party A (official seal): _________ Party B (official seal): _________
Legal representative (signature): ________ Legal representative (signature): _________
< p>_______year____month____day______year____month____day3. Simple labor service contract template
Contract number: ______________
Party A: ____________________
Party B: ____________________
According to the "Contract Law of the People's Republic of China" and "Construction of the People's Republic of China" In accordance with the provisions of the Law and other relevant laws and administrative regulations, Party A will contract part of the projects and processes in the _______________ project to Party B. In order to clarify the rights and obligations of both parties, the following terms have been reached through negotiation between the parties on a fair and reasonable basis, and we hope that we will abide by them.
Article 1. Contract Documents
As attachments to this Agreement, the following documents constitute the contract documents together with this Agreement and have the same effect as this Agreement:
1. Construction technical specifications, technical briefings, work instructions, and drawings of this project;
2. Quality inspection and acceptance standards of this project;
3. This project Construction safety standards;
4. Construction organization design of this project;
5. Construction progress plan of this project (including node plan);
7. Owner, Documents from the supervisor and Party A;
8. Supplementary agreement and meeting minutes from both parties.
Article 2. Contracting unit price
See (attachment) for details, no price adjustment.
Article 3, Relevant Agreements
1. Party B is responsible for Party A, recognizes and strictly follows the agreements signed between Party A and the owner regarding quality, safety, technology, environmental protection, civilized construction, etc. Standards, construction will be completed within the construction progress plan (including node plan) issued by Party A.
2. Measurement and payment
2.1 After Party B completes the contracted project, Party A shall make measurement and payment based on the quantity of qualified projects completed by Party B and the unit price of the bill of quantities (Annex 1).
2.2 Party B shall organize the construction according to Party A’s construction plan.
If the construction plan cannot be completed due to Party B's reasons, Party A has the right to claim from Party B the resulting delay compensation (compensation = ____‰ × target amount × number of days of delay). The compensation limit is the total price of the task. ____%.At the same time, Party A has the right to terminate this contract.
2.3 This project does not require advance payment for the project, and Party B should have the ability to advance funds before settlement and payment.
3. Supply of engineering materials
3.1 Party B is responsible for the main materials required and must be inspected and qualified by Party A before they can be used.
3.2 Due to road blockage, natural disasters and other irresistible external forces that cause materials to fail to arrive on site in time and affect construction, Party B shall not file a claim against Party A.
4. Technical work such as measurement, testing, and inspection
4.1 Party A shall conduct technical disclosures and measurements in written form at any time as necessary.
4.2 Party A is responsible for the engineering testing and inspection work, and Party B shall cooperate with Party A’s laboratory inspection under Party A’s supervision.
5. Party B is not allowed to subcontract. Otherwise, Party A has the right to terminate the contract. Party B shall bear the resulting losses and pay Party A a liquidated damages of _____% of the total price of this contract.
6. The next step of construction can only be carried out after the concealed project has passed the inspection and acceptance by Party A and the supervisor.
7. The unit price contracted by Party A to Party B covers the entire cost of project construction. As an economic entity, Party B shall fulfill all social obligations stipulated by the state (labor, medical, work-related injury and other insurances, various taxes and fees, etc.)
8. According to the "Labor Law", Party B shall pay on time and in full (not lower than the minimum wage standard announced by the local government) pay labor remuneration to employees. Party A has the right to supervise, and when necessary, Party A has the right to pay on its behalf (pay wages directly to Party B’s employees)
9. The unit price contracted by Party A to Party B includes Party B’s work-related injury insurance and third-party liability insurance . Therefore, Party B’s work-related injury accident costs and related expenses shall be fully borne by Party B.
10. Changes in Party B’s on-site construction person in charge and technical person in charge must be approved by Party A. When leaving the construction site, Party A must complete leave procedures.
11. Party B’s completed workload (calculated based on the number of entities) will take effect after being signed by Party A’s authorized representative. The project payment shall be signed by the heads of Party A’s technology, safety, quality, material, contract, finance and other departments, and shall be paid after approval by Party A’s captain.
12. Party A has the right to evaluate Party B’s ability to perform the contract. If Party B is unable to perform the contract (especially quality, construction period, safety), Party A has the right to terminate the contract and has the right to perform the contract according to the subject matter of the contract. _____% of the total amount shall be claimed from Party B for losses.
13. After signing this contract, Party B’s personnel and equipment must enter the construction site according to the specified time. Otherwise, Party A has the right to terminate the contract or impose corresponding penalties for Party B's breach of contract (the penalty standard is determined by Party A based on the degree of Party B's breach of contract, and the penalty limit is ____% of the total price of Party B's tasks)
14. Party B is responsible for the safety of this project, equips necessary safety protection facilities, acts in accordance with the relevant national production safety laws, administrative regulations, and operating procedures, and obeys Party A's safety supervision and management. Any personal casualties or mechanical accidents caused by any reason shall be borne by Party B. Party B assumes all responsibilities, and Party A does not assume any responsibility.
15. Party B must ensure civilized construction and environmental protection on site, including dust control, noise reduction and other related operations, and be equipped with various signs and signboards that meet the requirements of project construction.
16. Party B shall take measures to actively cooperate with the regular or irregular inspections and evaluations of Party A’s owners or supervisory engineers. If due to Party B’s reasons, Party A will be disgraced during the inspections and evaluations of the owners or supervisory engineers. If Party A is punished or Party A's evaluation results are affected, Party A will fine Party B ____ times or punish Party B based on the evaluation results. If an incident seriously affects Party A's reputation due to Party B's fault, Party A has the right to terminate the contract with Party B.
Article 4. Dispute Resolution
If a dispute occurs during the performance of the contract, the parties agree to resolve it in the following ways:
1. Reconciliation. On the basis of voluntariness and friendship, both parties communicate with each other, understand each other, and resolve the matter through negotiation;
2. Mediation. Under the auspices of a third party, disputes are resolved and an agreement is reached through third party persuasion, guidance, and mediation;
3. Arbitration.
If negotiation or mediation fails, the matter shall be arbitrated by the _________ Municipal Arbitration Commission.
Article 5, Supplementary Provisions
1. Matters not covered in this contract require both parties to negotiate and sign a supplementary agreement. The supplementary agreement has the same legal effect as this contract.
2. This contract will come into effect after being signed and sealed by both parties, and will naturally expire after the project is completed and inspected, the final payment for the project is settled, and the warranty period expires.
3. The original of this contract is ____ copies, each party has ____ copies; the copy is ____ copies, each party has ____ copies.
Party A: ____________________ Party B: ____________________
Representative: ______________ Representative: ______________
Telephone: ____________________ Telephone: ____________________
< p> Date: ____ month ___ day _____ year Date: ____ month ___ day _____ yearAttachment 1: Bill of Quantities (omitted)
4. Simple labor service contract template
Party A: ____________________ (hereinafter referred to as Party A)
Party B: ____________________ (hereinafter referred to as Party B)
According to "China In accordance with the relevant spirit of the Contract Law of the People's Republic of China and the Regulations on Contracts for Construction Projects, after negotiation between Party A and Party B, Party A agrees to contract the labor services of the __________________ project of this project to Party B. In order to clarify the rights and obligations of both parties, The following agreement terms are hereby signed for both parties to abide by.
1. Project name and location
This project is the teaching laboratory building project of __________ school, located in _____, __________ city.
2. Contracting Methods and Requirements
Party A of this project adopts the method of dividing the work type and combining the unit price into a total price, and contracts it to Party B in the form of tax, labor, food and accommodation. The contracting team is required to have labor contracting qualifications, have employment certificates for major types of work, and prepare a personnel roster and submit it to Party A for archival purposes.
3. Project Contracting Unit Price and Content
After negotiation between the two parties, the project will be contracted by Party B at a unit contracting price of _____ yuan/(m2, m3, t). The unit price includes the following: completion of a full set of construction drawings, disclosure minutes, and changes related to construction provided by the builder; on-site organization and cleanup; horizontal ground transportation within _____ meters; maintenance and upkeep of production equipment; conservation of materials; Cooperate with other teams and other content.
IV. Project Quality and Safety
According to the requirements of the owner, the quality of this project must be excellent, so individual contracting must ensure excellence. If the quality of this project is assessed as an excellent project, Party A Appropriate rewards will be given. If a single contract item is assessed as unqualified, Party B will rework and repair it until it is qualified. All economic losses caused by the rework will be borne by Party B and will be deducted from Party B's labor settlement.
Party B’s construction workers must obey the arrangements of Party A’s management personnel and must strictly abide by the "Safety Operating Procedures". In order to enhance workers’ safety awareness, team leaders and team leaders must arrange their workload every day and conduct safety briefings. Education, emphasizing safe operation, wearing a safety helmet, installing and fastening seat belts, and doing various safety protection tasks to prevent the occurrence of safety accidents. Party B will be responsible for any safety accidents caused by Party B, and Party A does not assume any economic or legal responsibility.
5. Civilized Construction and Rewards and Punishments
Party B’s personnel entering the construction site must abide by the civilized construction manual, complete the work and materials within the scope of their contract, and clean up the site strictly. Material conservation is a key issue, and random sawing, littering, and wasting of materials are not allowed. If found, fines will be imposed after responsibilities are clarified. At the same time, the person in charge of Party B must manage his own team. Personnel outside _____ city must obtain a "temporary residence permit" before entering the site. It is strictly forbidden for "_____" suspected patients to enter the construction site. They must strictly abide by the public security management regulations. Violators will be fined. , Party B’s personnel must obey the instructions of the management personnel and abide by all rules and regulations of the construction site. Submit ID card and family planning certificate to Party A.
Those under the legal age are not allowed to work on the construction site. Anyone who violates the regulations will be punished according to the relevant regulations of the project department.
6. Payment method and construction period
After Party B’s team enters the project, Party B will be responsible for its upfront expenses. Party A will lend Party B a certain amount of living expenses according to the progress of the project. The cap is paid to _____% of the labor fee. Upon completion of the project, _____% of the labor fee is paid. After the project is settled, the amount is paid to _____% of the labor fee. _____% is left to be paid off within _____ months after the expiration of the warranty period. Due to the tight construction period of the project and the strict rewards and penalties imposed by the owner, in order to ensure that the project is completed on time, Party B must pay a construction period deposit of _____ million yuan when entering the site. At the construction site, Party B must carefully organize and construct carefully according to the construction period control points determined by Party A to ensure the realization of the construction period goals. If the construction period is delayed due to Party B's reasons. In addition to deducting the construction period security deposit, penalties will be imposed according to the contract signed between Party A and the owner.
VII. Rights and Obligations of Both Parties
(1) Party A:
1. Party A has the right to conduct a qualification review of Party B and punish Party B for violating the terms of the contract Contents include the power to impose penalties, financial compensation and dismissal.
2. Party A shall arrange for Party B to implement the project contract content according to the project requirements, and Party B shall comply with it unconditionally.
3. Party A shall provide Party B with the most convenient construction conditions possible, and pay labor fees in accordance with the labor contract and the owner’s payment status.
4. Party A will implement a real-name system for the construction workers provided by Party B, establish health status files, and all workers with disabilities and intellectual disabilities will be removed and will not be allowed to enter the construction site.
(2) Party B
1. Party B must submit to Party A that it meets the contracting qualifications and has the right to make legal demands on Party A, take the initiative to undertake all the work in the contract, and ensure the quality of the project .
2. Owner B must carry out safe production in accordance with Party A’s requirements. Party B shall not violate safety operating procedures without authorization. Party B must bear full responsibility for personal injury and death accidents that occur in violation of safe operating procedures. Party A No responsibility is assumed.
3. Party B has the right to reject Party A’s instructions that do not meet the safety production requirements and put forward its own opinions for Party A’s reference.
4. Party B shall not use workers with disabilities or intellectual disabilities, and shall not conceal them or use them without permission. At the same time, Party B should provide a list of personnel and ID cards.
5. Party B must manage its own team and shall not conduct illegal or criminal activities on the construction site or outside. Party A will not be responsible for the consequences of a crime once it occurs.
6. In order to ensure the construction period, Party B must ensure sufficient labor force for the project according to Party A’s requirements and must not be passive in work.
8. Liability for breach of contract and others
1. Both parties must strictly abide by the above terms. If any party violates or causes the project to be suspended, the defaulting party must be held accountable.
2. If the company's reputation, on-site equipment and certain economic losses are caused to the project due to Party B's fault, Party A has the right to require Party B to compensate for all losses and deduct them from the contract labor fee.
3. Party B must keep its own equipment, tools and utensils, etc., and must keep them by itself. It shall not make other demands on Party A, let alone make excuses to affect the quality and progress of the project. The losses shall be borne by Party B.
4. This contract is made in _____ copies, Party A has _____ copies, and Party B has _____ copies. It will take effect after being signed by both parties and has the same legal effect.
Party A: ____________________ Party B: ____________________
Representative: ____________________Representative: ____________________
Date: ____year____month____day : ____year____month____day
5. Simple labor service contract template
Name of Party A (employer): _______________________________
Party B (Worker) Name: _______________________________
According to the provisions of the "Labor Contract Law of the People's Republic of China" and relevant laws and regulations, Party A and Party B shall abide by legality, fairness, equality, voluntariness, consensus through consultation, and good faith. This contract is concluded based on the principles.
Article 1 The term type of this contract is (fixed term/no fixed term/term based on the completion of certain tasks), starting from _____month_____day of _______year to__________ end. Among them, the probation period (with or without) starts from _____ month _____ of _______ year and ends on _____ month _____ day of _______ year.
Article 2 The work arranged by Party A for Party B is ____________________, and the work location is ____________________. Party B shall conscientiously perform job responsibilities and complete work tasks on time in accordance with the work content and requirements arranged by Party A.
Article 3 Party A arranges for Party B to implement _____ working hours (standard working hours/comprehensive calculated working hours/irregular).
Article 4 Party A shall pay Party B’s salary in full and in time by cash or transfer before _____ day of each month. The salary (time/piece rate) standard is __________, among which, the salary standard during the probation period for__________.
Article 5 Party A shall pay social insurance premiums for Party B in accordance with relevant national and local regulations. The specific items are _______________. Party B is responsible for withholding and paying the portion borne by Party B.
Article 6 Party A shall provide Party B with production safety training, and provide labor safety and health conditions and necessary labor protection supplies that comply with national regulations. If Party B is arranged to engage in work with occupational hazards, Party B shall be subject to regular health examinations. Party B shall strictly abide by various system specifications and operating procedures during the labor process.
When Party B suffers a work-related injury, Party A shall take timely measures to enable Party B to receive treatment, and pay Party B corresponding work-related injury benefits in accordance with the provisions of the "Regulations on Work-related Injury Insurance".
Article 7 Party A and Party B shall perform, modify, terminate and terminate this contract in accordance with the relevant provisions of the Labor Contract Law. If the relevant provisions of the Labor Contract Law are met, Party A shall pay Party B economic compensation in accordance with the law.
Article 8 If Party A illegally rescinds or terminates this contract, and Party B requires continued performance of this contract, Party A shall continue to perform; if Party B does not require continued performance of this contract or this contract cannot continue to be performed, Party A shall Party B shall pay compensation to Party B at twice the economic compensation standard in accordance with the law.
Article 9 Other matters agreed upon by both parties: _______________________________________
Article 10 Matters not covered in the labor contract shall be implemented in accordance with relevant national and local regulations.
Article 11 This contract shall take effect from the date of signature or seal of Party A and Party B. This contract is made in two copies, with Party A and Party B each holding one copy.
Party A (official seal)_________________________Party B (signature)_________________________
Legal representative (principal person in charge)_______________________________
Signature date:_______year____ Date of signature: _____month_____day, _______year