How to install the right vacuum line for your vacuum pump

Howcott Vacuum Technology's practical production experience shows that. Selection of appropriate vacuum piping is conducive to the normal operation of the vacuum extruder, easy to obtain high-quality brick billet. Usually the longer the vacuum pipeline is, the greater the resistance along the way and the local resistance, the vacuum degree obtained by the vacuum extruder can not be very high. Therefore, the length of the vacuum pipeline should be shortened as much as possible, it is best to install the vacuum pump near the vacuum extruder next to the vacuum extruder or installed in the vacuum extruder (limited to small vacuum pumps), in order not to affect the operation of the vacuum pump and vacuum extruder use and maintenance as a matter of principle, and according to the provisions of the vacuum pump to select the vacuum pipeline pipe diameter, try to minimize the use of bending pipes, elbows and tees, etc., and at the same time should also be used to seal the connection of a reliable and convenient pipe joints. Convenient pipe joints should also be used. Only in this way can ensure that the vacuum extruder to obtain a high degree of vacuum.