First cell phone to download the official APP with Bluetooth connection to use, wear on the hand to measure their heart rate blood pressure.
One, the installation and removal of the host: the installation of the host refers to the host is fixed to the wristband to facilitate the user's wear. Its operation method is very simple, only need to plug the USB on the host to the corresponding interface of the wristband, and press the lock buckle fixed. And if you want to remove the mainframe, you should first bend the wristband diagonally downward to make the mainframe pop out, and then remove the mainframe.
Synchronizing data
Mobile devices: First of all, we need to download the corresponding application software on the mobile device, which is different for different smart bracelets, so you can check it on the manual. After installation, open the application and register a new account (or log in to an existing account), log in and then click on the interface of the "search for the bracelet" (the host of the bracelet needs to be in the activated state). After searching the bracelet, enter the pairing code to pair it and click Finish button. Then, we will enter the relevant personal information on the phone, save it and enter the "Personal" interface, then turn on the bracelet and wait for the data to be synchronized.
Computer: First of all, we have to download and install the corresponding software on the computer. Then run the software, check the USB of the host computer to the computer's interface, and register an account to log in. If the computer has the "bracelet connection successful" prompt, we can enable the "synchronization data" function in the software interface.
Three, daily use
On a regular basis, we just need to wear the bracelet, and it will automatically record and display the movement. If we want to switch a certain function or mode, we also just need to press the corresponding button on the bracelet.
Product parameters:
Bluetooth: support BLE4.0
Main controller: REALTELRTL8762
Memory: RAM64KBROM384KB_patella stretcher 40M
Screen display: 0.86OLED display
Unlocking mode: capacitive touchscreen unlocking
Battery capacity: 1.5GHz, 2.5GHz, 2.5GHz, 2.5GHz. p>
Battery capacity: 45 mAh
Working time: about 5 days
Standby time: 25 days
Waterproof rating: IP67
Sensor: 3-axis sensor/green light heart rate sensor
Device support: Android 4.4 or above, ios8.0 or above, support Bluetooth 4.0
Heart rhythm How to connect the smart bracelet to the phone?
1. First of all, get your smart bracelet and cell phone ready, make sure the network environment is good, and there is less interference from Bluetooth devices around.
2. Make sure your smartphone has enough power. (It's best to charge it when you just get it)
3. Download the AppStore (IOS system) or Xiaomi App Store (Android system) corresponding to the bracelet...
4. After the download is completed, open the Bluetooth of your phone and enter the APP,
5. After logging in and entering the APP, bring the bracelet close to your phone and click to bind the bracelet.
What is the principle of heart rate measurement?
It is based on the principle that when a fixed wavelength light beam is irradiated to the surface of the skin, the light beam will be transmitted to the photoelectric receiver through transmission or reflection, and in the process, due to the attenuation caused by the absorption of the skin, muscles and blood, the intensity of the light detected by the detector will be weakened. The absorption of light by the skin and muscle tissue remains constant throughout the blood circulation, but the volume of blood within the skin is subject to pulsatile changes under the action of the heart.
When the heart contracts the peripheral blood volume is the largest, the light absorption is also the largest, and the detected light intensity is the smallest. The opposite is true when the heart is in diastole, where the intensity of light is detected to be the greatest, resulting in a pulsatile change in the intensity of light received by the light receiver.
Smart bracelet use precautions
Wear the bracelet on the wrist horizontal stripe 2 inches above the Neiguan acupoint, pay attention to the interface of the bracelet is toward their side, do not bring down. By walking naturally in this way, you can record various data.
While testing the heart rate, you need to stand still, chest and abdomen, relax, raise your arms to stay parallel to the chest position, keep the posture unchanged, you can see the interface of the bracelet is constantly changing, which shows the date, time, walking distance, steps, and finally heart rate and blood oxygen rate, until the interface is no longer changing on it.
After using it for a long time, we need to charge the bracelet, as long as the two copper pieces on the back of the body of the bracelet and the two copper buttons on the charger correspond to each other, you can connect the 5V charging head for charging, and the charging head of the cell phone can be used as well.
1, switch the screen of the bracelet to the heart rate measurement interface, the bracelet will automatically start to measure your current heart rate.2, on the Huawei Wear app/Huawei Sports & Health app, turn on the automatic heart rate measurement switch, the bracelet will automatically measure your heart rate periodically.
How to Detect Heart Rate on Xiaomi Bracelet
How to Detect Heart Rate on Xiaomi Bracelet
First of all, there are two types of heart rate measurement: one is photoelectric measurement and the other is electrode measurement, and Xiaomi Bracelet's "photoelectric volumetric pulse wave tracing method" is the photoelectric measurement that we often refer to. When measured in this way, the human body will have a small fluctuation of blood vessels throughout the body, the principle of shooting a beam of light to the human wrist, and use the camera to observe the reflection of the shadow. If there is a small change in it, the heart is considered to have beaten once. Detecting the heart rate requires always having to emit light, so the energy consumption is slightly higher, different skin colors can affect the measurement results, and any interference from external light can produce a series of misjudgments. You can see where it goes wrong according to its principle, and in more detail you can take another look at huahuo/bracelet/201511/6730
What principle is used to measure heart rate on the Xiaomi bracelet
The Xiaomi Bracelet 2 is designed to monitor heart rate through the Photoelectric Volumetric Pulse Wave Tracing method (PhotoPlethy***oGraphy), abbreviated as PPG, to monitor heart rate. The principle is simple: blood is red, reflects red light and absorbs green light. The Xiaomi MiBand 2 combines a green LED light with a light-sensitive photodiode to detect the amount of blood flowing through the wrist at a given time, thus obtaining heart rate information.
How to measure heart rate on Xiaomi Bracelet
Currently, Xiaomi Bracelet Optical Edition and Xiaomi Bracelet 2 are equipped with a heart rate measurement function, which relies on the photoelectric heart rate sensor on the back of the bracelet, the principle of the measurement is: photoelectric volumetric pulse wave tracing (PhotoPlethy***oGraphy), referred to as PPG, to monitor the heart rate. The principle is simple: blood is red, reflecting red light and absorbing green light. Xiaomi's bracelet combines a green LED light with a light-sensitive photodiode to detect the amount of blood flowing through the wrist at a given time, thus obtaining heart rate information.
How do I use the Xiaomi Band 2? How to measure heart rate? How to see the current step count, how to see the time? How to see the power level?
First of all, Xiaomi Bracelet 2 needs to be paired with a cell phone to use it. (Note: Xiaomi Bracelet 2 supports Bluetooth 4.0 for Android 4.4 or iOS 7.0 and above.)
(I) Pairing
1, first download the Xiaomi bracelet APP through the APP store.
2, log in to your Xiaomi account.
3, choose to tie the Xiaomi bracelet, and close the bracelet to the phone, the bracelet screen appears on the right icon, and accompanied by vibration, at this time touch the bracelet below the button to complete the pairing.
4. After you finish tying the bracelet, you can see the information about the bracelet on the mobile interface. You can choose to wear the bracelet, set the screen display information, turn on/off the _ wrist bright screen function, turn on/off the heart rate detection function, etc., at the same time will display the bracelet firmware version number and MAC address.
(2) Heart rate measurement
In the new version of the Xiaomi bracelet app, there are four panels: Status, Discovery, Smart Play and My Settings. The status interface allows you to view your exercise data, sleep data, and heart rate data, and by tapping on the corresponding data, you can enter a more detailed data interface to view the day's data or previous data.
Tap the Running icon in the upper-left corner of the status screen to view heart rate changes during running.
(3) Watching steps, time, and battery
By default, the Xiaomi MiBand 2 display will show the time, and when you lift and flip your wrist, it will automatically light up and show the current time, but users can also set it to show steps, distance, calories, heart rate, and remaining battery.
Source: wearable.ofweek/.... .5
How to see the heart rate of Xiaomi bracelet 1
First of all, you need to turn on the heart rate detection function of the Xiaomi bracelet, open the Xiaomi Sports APP, touch the upper right corner of the "" button, in the pop-up menu, select "heart rate", enter the interface please! After entering the interface, please keep the bottom of the light-sensitive version of the bracelet close to the panel, tap the "manual measurement" and the green light at the bottom of the bracelet will light up, please avoid moving, and after the measurement is completed, it will automatically return to the heart rate interface.
Note: When measuring heart rate manually on the Xiaomi MiBand, be sure to keep the device at a standstill and keep the bottom of the device close to your arm so there is no visible gap, and don't shake your arm during the manual measurement.
Reminds that substandard wearing styles can affect the measurement of heart rate signals, such as light leakage due to incomplete fit, arm swinging, and slight movement of the bracelet on the panel, etc. Wearing the bracelet too tightly, arm _high_, and clenched fists can affect the blood back to the circle, which may also affect the heart rate signals. The correct way to take a measurement is to place the arm flat, relaxed and still, while ensuring that the bracelet fits snugly on the arm. Note: Individual differences such as panel color, hair, tattoos, and scars may also affect the heart rate signal when worn correctly.
How to measure heart rate on the Xiaomi bracelet
The Xiaomi bracelet Luminous and Xiaomi bracelet 2 have the ability to measure heart rate, which can be measured with the Xiaomi Sports app, by selecting Heart Rate in the main interface, while the Xiaomi bracelet 2 can be measured independently from the phone, by turning on the heart rate display function and switching the bracelet to the Heart Rate display function. The only thing you need to do is turn on the heart rate display function, switch the bracelet to heart rate monitoring, and maintain the correct posture to measure the static heart rate.
The two generations of bracelets measure heart rate using PhotoPlethy****oGraphy, or PPG for short.
Can Xiaomi Bracelet 2 measure heart rate without a cell phone
With Xiaomi Bracelet 2, you can measure your heart rate using the touchscreen buttons.
What is the principle through which Xiaomi Bracelet 2 monitors heart rate
What is the principle through which Xiaomi Bracelet 2 monitors heart rate?
Xiaomi Bracelet 2 monitors heart rate by means of PhotoPlethy****oGraphy, or PPG for short. The principle is simple: blood is red, reflects red light and absorbs green light. The Xiaomi MiBand 2 combines green LED light with a light-sensitive photodiode to detect the amount of blood flowing through the wrist at a given time, and thus obtain heart rate information.
My Xiaomi Bracelet (Light Sensor Version) does not measure heart rate.
Do you have a green light that appears when you measure your heart rate?
Can I measure my heart rate on my Xiaomi bracelet sports version?
Hello friend, this one can measure heart rate.
Please see the instructions of the Xiaomi bracelet for details on how to use it.
How to use the heart rate watch
This is a round screen to create the ultimate ultra-thin smart watch, which not only has all the functions of the smart bracelet and smart watch, when a good competent health assistant, through the Bluetooth and cell phone, computer connection, so that you can send and receive a variety of smart terminal information at any time, anywhere. Instead of Bluetooth headset, it is more convenient for you to receive calls anytime and anywhere.
What's more amazing is that it can also remotely control your TV and other household appliances in your home through infrared; it can remotely control smart light bulbs and other smart homes through Bluetooth. Yes, it is the smart remote control watch with infrared + Bluetooth dual remote control, which allows you to abandon all kinds of remote controls at home, control everything at home anytime, anywhere, and create the future life.
Heart rate monitoring is through the bottom of the watch sensor on the skin monitoring feedback to the watch processor and then through the display of the number shown, usually this watch type of heart rate monitoring can not be 100% accurate, or else do not have to hospitals, can only be used as a reference. I hope this can help you, thank you!