The definition of eye washer is an effective safety protection product. When toxic and harmful substances (such as chemical liquids) spill on the body, face and eyes of workers, or when a fire breaks out, the harm can be quickly reduced to a minimum. When the eyes or bodies of field operators are exposed to toxic, harmful and other corrosive chemicals, under what circumstances should eye washers be used.
Eye washer can be used to wash or shower eyes and body urgently, mainly to avoid further harm of chemicals to human body, and it is a preliminary treatment for eyes and body. However, eye washer products are only used in emergencies, temporarily slowing down the further harm of harmful substances to the body.
Further treatment and treatment need to follow the doctor's advice. The main component of the eye washer is an emergency rescue safety protection product, which mainly consists of the following parts.
1. Eye-washing nozzle: a water nozzle for cleaning eyes and face.
2. Eye-washing nozzle dust cover: a dust-proof device used to protect the eye-washing nozzle.
3. On-off valve: a valve device used to open and close the water flow.
4. Water pipe: a device used to guide water flow.
5. Filter screen: used to filter the debris entering the eye washer.
6. Base: fix the eye washer. Installation of eye washer 1 directly installed on the ground of the workplace, close to the dangerous work area, with a distance of no more than15m. The time to reach the eye washing device in a straight line does not exceed 10 second, at which time the chemicals splash on the eyes, face, neck and body of the staff.
Use the eye washer in time to wash a lot, reduce the injury and win valuable time for medical rescue. 2 There should be no non-explosion-proof electrical switch within the radius of 2 meters of the eye washer. 3 obstacles shall not be piled up within the radius of 2 meters of the eye washer. It is impossible to install an eye washer on the floor. 5 must be connected to drinking tap water.
How to use an eye washer?
1. Remove the dust cover of the eyewash nozzle.
2. Push open the eye washer switch valve to let the water flow out.
3. Open and fix the eyelid with the index finger and middle finger.
4. Keep your head forward and rinse your eyes with clean water under proper water pressure for at least 15 minutes.
5. Go to the nearest medical institution for further treatment in time.