How thick the anticorrosive paint needs is generally based on the needs of customers, but it is recommended to consider the base surface and the environment in which the epoxy floor will be used in the future. This makes it easier to conform to the actual situation of the floor.
Thickness and bearing capacity of several common epoxy resin floors;
During the construction of epoxy floor, the requirements for the base surface are very high.
For concrete foundation ground, 1.0 epoxy Bo Tu floor can be used for good flatness and surface strength. If the ground with poor flatness and surface strength needs leveling to repair the strength and smoothness of the ground, 1 ~ 3 ㎜ epoxy mortar ground can be used, and 2 ~ 3 ㎜ epoxy self-leveling ground can be used for advanced engineering requirements. Its wear resistance and load-bearing performance, including the decorative effect of the surface, are better than ordinary epoxy floors and epoxy mortar floors. It is very important to choose the right epoxy floor. You can choose your own color. Generally, the common colors of garage parking floor are gray, blue and green, and the colors of logo paint are yellow and white.
1.0mm epoxy Bo Tu floor: the construction scheme of epoxy Bo Tu floor can bear 1-2 tons load performance, and the impact resistance and wear resistance are average. Mainly used for decoration, such as offices, where transportation is not needed, there is no mechanical equipment, and the concrete foundation has good flatness and strength. You can choose epoxy Bo Tu floor technology with one bottom, one middle and two putty surfaces.
Terrazzo, emery, ceramic tile foundation ground, as long as it can play a decorative effect: a simple process of one bottom and two sides can be. In the case of poor ground strength and smoothness of concrete foundation, it is suggested that a layer of cement leveling layer or self-leveling cement leveling layer should be made before laying epoxy Bo Tu ground.
2.0mm epoxy mortar floor: the construction scheme of epoxy mortar floor is an economical and wear-resistant floor technology, which can bear the load of 2-3 tons of product transportation and mechanical equipment. The epoxy mortar floor is consolidated by epoxy resin and superhard quartz sand, and its surface has extremely high strength and wear resistance. For example, the floor of the workshop of the hardware factory needs high wear resistance and heavy pressure resistance, so the epoxy mortar floor can meet the use needs of the hardware factory, and the construction cost is also relatively economical. Just lay it 2.0 mm thick ..
The construction scheme of epoxy mortar floor can be used in the areas where the industrial workshop floor needs wear resistance and heavy pressure resistance, and delivered to the decoration working environment, such as clothing factory, shoe factory, plastic hardware factory, machinery factory and other industries.
Epoxy self-leveling floor: the production workshop of industrial workshop is equipped with heavy forklift, which requires wear resistance, pressure resistance and impact resistance. You can choose the construction scheme of epoxy self-leveling floor, which has beautiful surface and mirror effect, and can also resist acid and alkali chemicals with concentration below 10%.
Epoxy self-leveling floor thickness:
1.0mm-3.0mm. The thickness of the project is designed according to the different requirements of different industries for wear resistance and pressure resistance and the ground. For example, the ground of underground garage parking lot, because of frequent traffic, compared with the parking area, if the design requires high quality, 2.0mm epoxy self-leveling ground technology can be used.