How to install one-way see-through glass What is one-way see-through glass
One-way see-through glass is a special kind of glass that we don't often see in ordinary life. This kind of glass is mostly used in prisons, police stations and psychiatric hospitals, is a kind of one-sided surveillance or observation role. This design of glass is a special change accomplished by light, and has a high scientific nature. In fact, for the installation of one-way see-through glass, many friends are not familiar with, next, follow the introduction, let's come together to recognize it. So, how to install one-way see-through glass?
Definition of one-way see-through glass
One-way see-through glass in use when the reflective surface (mirror) must be the light-facing side or toward the outdoor side. When the outdoor is brighter than the indoor, the one-way see-through glass is similar to the ordinary mirror, the outdoor can not see the indoor scene, but the indoor can see the outdoor scene. When the outdoor than indoor dim, the outdoor can see the indoor scene, and the indoor can also see the outdoor scene, the degree of clarity depends on the strength of the outdoor illumination.
One-way see-through glass is mainly used for hidden observation windows, holes and so on. The product can be used in public security bureau, guard house, police station, prison, court, procuratorate, karaoke, office, kindergarten, psychiatric hospital, school and other special places.
One-way see-through glass installation
One-way see-through glass is divided into positive and negative sides. The front side is a glass mirror, used to reflect the light, the installation should be the front side toward the room being monitored (i.e.: the space to be observed, such as the space where the suspects are located.) ? ;Orient the reverse side toward the location of the judge (i.e.: the monitored room). The intensity of the light in the monitored room should ensure sufficient brightness, the brighter and stronger the light in the monitored room, the more obvious the effect of the one-way perspective of the glass.
In order to make the glass one-way perspective performance to achieve the best state, in principle, the monitoring room is not installed ceiling lights, do not allow other light sources exist. If there is a window next to the monitoring room, it must be installed with light-impermeable curtains, such as the sealed curtains used in hotels. When in use, it is recommended to turn off all lights in the monitoring room. If lights must be used in the monitoring room, it is recommended to use point lights, such as writing desk lamps, etc. (lampshade opaque) to reduce the range of light, and control the ratio of light between the monitoring room and the room being monitored in the state of 1:3, or a lower ratio to ensure that the one-way perspective of the glass performance is intact.
Auto Sync with Cloud
No manual interaction required to synchronize with cloud services.
One-way see-through glass in ordinary life will not be used, a lot of one-way see-through glass production and installation process are certain provisions of the program, if the light is not set up ideally, one-way see-through glass will be affected by the use of certain effects. So in the production process is also more complex, to go through many steps and tests to be put on the market. Through the above detailed introduction, I believe that we have been more familiar with the one-way see-through glass, I hope my introduction can help readers and friends.