φ50 2.0
75*2.3
110*2.8
110*3.2
160*3.2
160*4.0
200*4.0
200*5.0
Commonly used. So much
These: what is PPC type plastic and how to recognize it from the appearance?
Response: PPC belongs to the PP category, the full name is chlorinated polypropylene, used in the manufacture of daily necessities, electrical appliances and so on.
2, I am engaged in waste plastic crushing, ``Please ask now waste plastic are some of the price (2004-11-9)?
Response: polypropylene (woven bag): 1200-1600 yuan / ton; polypropylene (tub bucket material): 2100-2600 yuan / ton; polyethylene (soft material): 2300-3300 yuan / ton; polyethylene (hard material): 2700-3800 yuan / ton; polyvinyl chloride: 2500-3100 yuan / ton; foam: 2000-3300 yuan / ton; Polyester (mineral water bottle): 5000-5800 yuan/ton;
(Declaration: the data provided is for reference only, and please refer to the date of quotation.)
3, what type of raw material is used to produce HDPE gas pipe and water supply pipe?
Response: The raw materials used for the production of HDPE gas pipe and water supply pipe are PE80 and PE100
4. What kind of material is PPN?
Reply: PPN is a kind of polypropylene.
5, now the EVA with the best elasticity is which produced <2004-11-21 >? What brand? To domestic, and soft polyvinyl chloride for injection molding of what ah?
Response: Domestic EVA is basically produced in Beijing, is divided into extrusion grade 14 type (VA = 14) general-purpose film, 18 type (VA = 18) foam body, and injection molding grade 5 type (VA = 5) food packaging film.
PVC for injection molding is generally Type 5 and Type 3.
6. What is the Chinese word for this plastic, PPU?
Response: PPU is thermoplastic polyurethane.
7, how can I identify PVC plastic, PVC can be recycled granulation? What way to take? How is the current recycled PVC market (2004-12-4)?
Response: 1) PVC Chinese name: polyvinyl chloride.
Burning method of identification, softening or melting temperature range: 75 ~ 90 ° C; combustion: difficult to soften; combustion flame state: on the yellow under the green with smoke; away from the fire after the situation: away from the fire is extinguished; odor: irritating acidic taste.
Solvent treatment identification, solvent: tetrahydrofuran, cyclohexanone, ketone, dimethylformamide; non-solvent: methanol, acetone, heptane.
2)It can be regenerated and granulated.
3)PVC recycling process mainly includes the following six steps:
(1) pretreatment of PVC waste; (2) selective dissolution in a mixture of solvents; (3) separation of insoluble substances; (4) precipitation of regenerated PVC; (5) drying treatment; (6) recovery and recycling of solvents
4)The current price of 8200 yuan /ton around (2004-12-4).
8. What is the use of Ethylene Propylene Rubber?
Response: Ethylene propylene rubber has three yuan and two yuan ethylene propylene rubber, general use: all molded products; general-purpose hose and automobile internal heat-resistant hose; manufacture of electrical components; because of the excellent extrusion performance, can be mixed with high-viscosity rubber **** in order to improve its extrudability.
9, beverage bottle cap is What material to do?
Response: Generally it is made of PP (polypropylene).
10, LL0412 LL0501 LL0503 LL0504 LL0505 on behalf of which manufacturer what model?
Response: LL represents LLDPE; the last four digits represent the delivery time, the first two represent the year, the last two represent the month. For example, LL0505 that trading varieties are LLDPE, delivery road?005 May. And so on.
11, 5000S raw materials are linear plastics?
Response: 5000S is HDPE (high-density polyethylene), not linear plastic.
12, Looking for a plastic that can withstand high temperatures . About over 200 degrees.
Response: PTFE can fulfill the above requirements.
In addition, special engineering plastics that can withstand high temperatures include fluoroplastics, silicone resins, polyetherimide, polyetheretherketone, liquid crystal polymers, and so on. Modified nylon, which can withstand high temperatures above 250 degrees.
13, ABS belongs to the modified polystyrene class?
Response: ABS is acrylonitrile-butadiene-styrene **** polymer, does not belong to the category of modified polystyrene, modified polystyrene belongs to the PS.
14, high-pressure polyethylene and low-pressure polyethylene and what is the difference between?
Response:
High-pressure polyethylene (HPPE) is low-density polyethylene (LDPE);
Low-pressure polyethylene (LPPE) is high-density polyethylene (HDPE).
15, I want to run a recycled plastic pellet factory, but I don't know what kind of material those woven bags belong to, such as PP, ABS and so on.
Response:
Generally PP is used to make woven bags; ABS is more rigid and is generally used to make shells, parts and so on.
16, Noryl SE1 GFN3 is what type of plastic raw material, what is the name?
Lexan 940 is what type of plastic raw material, what is the name? What is the price?
Response:
Lexan 940 is PC produced by General Electric Plastics, the market price of about 34,000.Noryl SE1 GFN3J is also General's, PPO, the market price of about 35,000.
17, ABS specific gravity is how much?
Response:
ABS density is about 1.05 grams per cubic centimeter, slightly heavier than water, with tough, hard, rigid characteristics.
18, please MSRESIN, ATRATE, TYPE is what type of plastic, what is the name, what is the price, what is produced?
Response:
MSRESIN for MS resin, is commonly used transparent plastic raw materials, general injection molding and extrusion molding, transparency is close to PMMA, used for optical components/toys/lampshades/lighting/ OA accessories/food containers/home appliances/building materials, etc.; mostly imported from Japan and Taiwan, the offer is around 15,500 -18,300.
19, what is the English code for waste acrylic. What is the price of scrap now?
Response:
ACRYLIC is a special kind of organic glass.
PMMA is commonly known as plexiglass, also known as acrylic or acrylic, Hong Kong people are mostly called acrylic, is an important thermoplastic developed earlier, with better transparency, chemical stability and weather resistance, easy to dye, easy to process, beautiful appearance, has a wide range of applications in the construction industry.
Transparent acrylic scrap price is about 10,000; because of the approaching year-end, the acrylic scrap market is in a state of shortage.
20, PS material and ABS material performance difference?
Response:
PS plastic (polystyrene), material properties: electrical insulation (especially high-frequency insulation) is excellent, colorless and transparent, light transmittance is second only to Plexiglas, coloring water resistance, chemical stability, good. General strength, but brittle, easy to produce stress cracking, not resistant to benzene. Not resistant to benzene, gasoline and other organic solvents. Suitable for the production of insulating transparent parts. Decorative parts and chemical instruments. Optical instruments and other parts. Molding performance: 1. Amorphous material, small moisture absorption, do not need to be fully dried, not easy to decompose, but the coefficient of thermal expansion is large, easy to produce internal stress. Good mobility, can be used screw or plunger injection molding machine.2. It is appropriate to use high material temperature, high mold temperature, low injection pressure, extend the injection time is conducive to reducing internal stress, prevent shrinkage. Available in various forms of gate, gate and molded parts arc connection, so as to avoid damage to the molded parts when going to the gate. Uniform wall thickness of the molded part, and even ejection of the molded part. The wall thickness of the molded part is even, and it is better not to bring inserts, if there are inserts should be preheated.
ABS (acrylonitrile butadiene styrene), light yellow granular or bead opaque resin, non-toxic, odorless, low water absorption. It has excellent physical and mechanical properties, excellent low-temperature impact resistance, excellent electrical properties, abrasion resistance, dimensional stability, chemical resistance, coloring. Easy to process molding.ABS is resistant to water, inorganic salts, alkalis and acids, insoluble in most alcohols and hydrocarbon solvents, soluble in aldehydes, ketones, esters and some chlorinated hydrocarbons.The disadvantages of ABS are flammable, low heat distortion temperature, poor weather resistance. Combustion characteristics: flammable; away from the fire continues to burn; flame yellow, thick black smoke; softening, foaming; acrylonitrile flavor. Solubility: soluble solvent: methylene chloride; insoluble solvent: alcohols, aliphatic hydrocarbons, water. Applications:automobile industry,machinery and equipment,electronic and electrical appliances.
21, syringes with what PP material? Can it be recycled? How much does it cost per ton?
Response:
The PP material used for syringes is a kind of PP called random*** poly PP, which can be recycled, and the current price is about 13,000 including tax
The used syringes are medical wastes, and they are even used in order to avoid any harm.
Some users recommend South Korea's RP340R (MI25) or 370Y (MI18); and strongly recommend never to use recycled materials, because it is easy to cause medical accidents.
22, waste PET use, price, treatment technology?
Response:
Use: recycled pet is mainly used for fibers, sheets, bottles for non-food packaging, etc. Developed uses include: construction materials, food packaging and containers, etc. Japanese companies have used polymer alloy improvement technology to process recycled pet into powder coatings with performance superior to that of the powder coatings made from new pet materials. Price: did not check the public offer, basically a single negotiation.
Treatment process: Japan Teijin developed a recycling method from the waste PET bottles DMT (dimethyl terephthalate) and EG (ethylene glycol), the first waste PET bottles crushed and cleaned, and then dissolved in EG, in the boiling temperature of the EG and the pressure of 0.1MPa, the PET for depolymerization, generating double a hydroxyethyl terephthalate (BHET). After filtration to remove the slag and additives, BHET reacts with methanol, and under the boiling temperature of methanol and the pressure of 0.1MPa, it undergoes an ester exchange reaction to produce DMT and EG. Then, after distillation, DMT and EG are separated, and then, through the process of recrystallization, DMT is purified; EG is purified through distillation, and the methanol can be recycled. The purity of both the recovered DMT and EG is 99.99%, and the cost of production is comparable to that of the generic DMT and EG method. DMT can be converted into pure TPA (terephthalic acid), which is used in the manufacture of bottle-grade PET resin. The recycling unit generates about 10 percent of the feedstock the company uses to produce the resin.
23. How are waste plastics classified?
Response:
Common types of waste plastics are roughly divided into PE, PP, PVC, PET, EPS, ABS, PA, etc.; among them, PE has plastic shed material, industrial packaging film, lactic acid beverage bottles, detergent bottles, etc.; PP has woven bags, baling bands, strapping ropes, and part of the automobile bumper, etc.; PVC has plastic door and window profiles, pipes, etc.; PET has Coke, Sprite, and other tea drink bottles; and PET has Coke, Sprite, and other tea drink bottles. PET has Coke, Sprite and other tea drink bottles; EPS is commonly known as Styrofoam.
24, the chemical name of waste plastics, as well as a variety of waste plastics into particles can be done after what plastic products.
For example, mineral water bottles made of granules can do what? What is its chemical name?
What can be made from woven bags?
Response:
Thermoplastic manufactured products can be recycled and re-pelletized, called recycled plastics, which are called **Recycled Material.
Theoretically, its use is slightly narrower than new material. Because of the recycling technology level and finished product use of special: such as food packaging, medical and so on (in order to avoid harm to the human body, generally such products do not use recycled materials).
But the advanced recycling technology and strict recycling system in developed countries have made the performance of recycled materials close to that of new materials, and even through the nature of the synthesis can be developed for new uses.
Domestic technology is backward, and so far, the recycled plastic pellets have not introduced enterprise standards or national standards. Therefore, the quality of plastic recycled material varies, and its use depends on its specific technical indicators.
25, organic plastics (acrylic) what is the English code?
Response: Acrylic (ACRYLIC) is a special kind of organic glass, referred to as PMMA
26, what is the scientific name of nylon?
Reply:
Nylon is also known as PA or polyamide.
27, the kind of infusion tube used in hospitals is made of what plastic?
Reply: PVC,PE
28, the detailed use of polytetrafluoroethylene?
Response:
Polytetrafluoroethylene (PTFE) is commonly known as the king of plastics, is the largest production and use of fluorine plastic varieties, accounting for the entire production of fluorine plastics about 70%, used in chemical, mechanical, electrical, construction, electronics, automotive and other fields
29, please ask the PPR-related information? Aluminum-plastic PPR composite pipe and stainless steel PPR composite pipe.
Response:
No recent stock, so no offer for the time being.
PPR pipe products for industrial and civil buildings in life, sanitation and drinking water supply and hot water heating system, is to replace the copper pipe and galvanized pipe upgrading products, can be used for: 1 residential hot and cold water system 2 water purification, pure water pipeline 3 industrial water and chemical substances transport, discharge 4 hot water recycling system 5 compressed air with the pipe 6 food, beverage production and delivery system 7 other industrial, agricultural pipe.
Steel-plastic composite pipe is widely used in urban construction water supply, natural gas, petrochemical and other fields of environmental protection ideal pipe. Steel-plastic composite pipe has the double advantages of metal and plastic; high temperature and high pressure resistance, corrosion resistance; smooth inner wall of the pipe, low resistance to scaling, non-toxic, non-polluting, anti-static, heat insulation, easy to cut, processing.
Aluminum-plastic composite pipe applications:
Industry: a variety of instruments, instrumentation, shielding conduit, insulated conduit, a variety of gases, liquids, medium transport pipeline.
Construction: building indoor cold, hot water, gas conduit, solar water heater hot and cold piping, low-temperature radiation, heating piping.
Agriculture: nursery, orchard, garden sprinkler irrigation pipes and other irrigation projects with pipes.
Public **** business: hot and cold water pipes for hotels and restaurants, oxygen pipes for hospitals, food transportation pipes, pipes for various air conditioners, and various pipes for ships.
30, used for spring plastic is what material?
Response:
The spring plastic performance of the main request: 1, the deformation energy V value to be large (i.e., the spring modulus E value to be small) 2, strength, especially fatigue strength to be large 3, easy to process molding
Thermoset fiber reinforced plastics (FRP) deformation energy V value is larger than the general metal can be compared with the spring steel; and its strength is high, the stress is unidirectionally distributed, it is the manufacture of The ideal material for the manufacture of leaf springs.
31, ABS.PS.PP.PE and other materials, the characteristics of the main purpose and the difference between the various standards.
Response:
ABS has good rigidity, high impact strength, heat resistance, low temperature resistance, chemical resistance, mechanical strength and electrical performance is excellent, easy to process, processing dimensional stability and surface gloss, easy to paint, coloring, but also can be sprayed with metal, plating, welding and adhesion and other secondary processing properties. Main applications: automotive, appliances, electronics / electrical appliances, building materials, ABS alloys / **** mix
PS electrical insulation (especially high-frequency insulation) is excellent, colorless and transparent, light transmittance is second only to Plexiglas, coloring resistance to water, good chemical stability,. General strength, but brittle, easy to produce stress cracking, not resistant to benzene. Not resistant to benzene, gasoline and other organic solvents. Suitable for the production of insulating transparent parts. Decorative parts and chemical instruments. Optical instruments and other parts.
PE is basically divided into three categories, namely, high-pressure low-density polyethylene (LDPE), high-density polyethylene (HDPE) and linear low-density polyethylene (LLDPE). Film is its main processed product, followed by sheets and coatings, hollow containers such as bottles, cans, drums and other various injection molding and blow molding products, pipes and insulation and sheathing of wires and cables. Mainly used in packaging, agriculture and transportation sectors.
pp cheap, light, good processability and a wide range of uses, catalysts and the development of new processes to further promote the expansion of the field of application, it has been said: "as long as there is a product of the material is replaced by plastic, then this product has the potential to use polypropylene". Major applications: woven bags, tarpaulins, consumer durables: such as automobiles, home appliances and carpets.
32, PC commonly used products are those kinds of VCD disks and outer packaging box is what plastic do?
Response:
Polycarbonate (PC) material has the advantages of light weight, transparency, high strength, shock resistance and good processing performance, in the development of more than 50 years, the application areas continue to expand.
PC products have penetrated the application of automotive, construction, medical, clothing and other industries, PC lights, PC car skylights, automotive communications systems in the light wave conductor fiber optics, transparent canopy roofs, PC panels, PC injection tube, in addition to the bottom of the swimming pool, self-lighting systems, solar energy collection systems, high-definition large TV screens, textiles, textile materials can be recognized as chip marking fiber and some new Chip marking fibers in textiles and other new areas are less PC materials, PC products are contributing to all walks of life, its application potential will be further developed.
The CD-ROM is the most familiar PC application, and it is developing in the direction of high capacity, with the new DVD's storage capacity expected to reach 100 billion bytes.
33, pc performance
Response:
High impact strength, dimensional stability model, colorless and transparent, good coloring, electrical insulation, corrosion resistance, abrasion resistance, but nourishing lubrication is poor, there is a tendency to stress cracking, high temperature easy to hydrolyze, and other resins with poor compatibility.
34, China's largest recycled plastics market is that a few places?
Response:
Generally the areas where the trade of new materials is more active, the trade of recycled materials is also more active, such as Yuyao, Guangdong, Shandong and other places.
35, ACETAL (acetaldehyde diethyl acetal) commonly known as what material? What is the performance?
Response:
ACETAL is acetal, acetaldehyde diethyl acetal; commonly known as plastic steel (Hong Kong and Taiwan are called: plastic steel); can be used to do outdoor products such as buckles, high hardness, moisture-proof, can be used in cold or dry environment.
36, in 180 degrees in the non-deformation of plastic raw materials are?
Response:
Aromatic nylon can be up to 260 ℃, there are fluorine plastic and so on can be resistant to this and other high temperatures.
37, PP powder is a universal material? Is it as universal as injection molding and wire drawing? Can it replace PP material? How much is the market price? Answer:
PP plastics are all general-purpose plastics. As long as the equipment allows, powder and granule can replace each other, the current market price is around 10200.
38, please ask the daily oil prices have Brent, WTI, OPEC oil prices are how to analyze, while oil futures high and low is how to see now after the plastic trend is high or low?
Response:
By the role of the principle of cost-push,: crude oil - naphtha - ethylene - polyethylene - plastic products, crude oil prices and plastics trend is consistent (short-term deviation is also normal), but this effect from the theory of Theoretically speaking, there should be a certain lag effect, and not like the current domestic plastics market so sensitive reaction. At present, the international oil prices on the domestic plastics market is mainly the influence of the mentality, as well as the role of a herd mentality.
When the market returns to rationality, the supply and demand of plastics itself will have a greater impact on market prices.
/b618839/d36536112.htm
According to the molecular structure of synthetic resins in plastics and thermal bear. Plastics can be 4
kinds, one is thermoplastic plasticidae, the other is thermosetting plastics.
[1) the characteristics of thermoplastics
1) the molecules of the resin is a linear or wen chain structure.
2) soften when heated, when it reaches a certain humidity is a molten state, become
flowable viscous mask, in a certain pressure can be formed into a certain shape,
cooling can be maintained after the shape has been formed. If heated again and can be softened, begin
melt, repeated molding.
3) In the heating and cooling process, there are only physical changes without chemical changes
chemical changes.
(2) Characteristics of thermosetting plastics.
1)The molecular structure of the resin.
2)At the beginning of heat. Tree Yin molecules are still linear structure, still has the plasticity of thermo
plastic plastics. When continue to heat, the linear molecular main chain breaks into the formation of chemical
School chain bonding (i.e., crosslinking). Molecules were mesh structure, when the temperature reaches a certain value
when the molecules into a body structure, the tree is brittle transformed into neither baked nor dissolved not
revolution of the shape. Repeated heating is no longer softened, no longer plastic.
3) in the molding process both physical and chemical changes.
Thermoplastics are mainly polyethylene, polyvinyl chloride, ABS, polypropylene
polystyrene, nylon, formaldehyde, and so on.