Safety inspection records should clearly state the following:
1, the name of the unit of the safety inspection, the type of project, the specific inspection time.
2, the specific inspection items or products. Including the type, model, age, safety performance.
3, the specific list of personnel to participate in the inspection, the person in charge of the signature.
4, detailed inspection record process.
5, the final conclusion of the inspection, comments or recommendations.
Extended Information:
p>Safety checklist items are categorized as follows:
1. Safety checklist for design review:
Mainly used by designers and safety inspectors and safety evaluators in the design review, the design review of the enterprise's productive construction and technological transformation projects. Can also be used as the basis for the "three simultaneous" safety pre-evaluation audit. Its main content should include:
1) layout;
2) devices, equipment, facilities, process safety;
3) the reliability of machinery and equipment facilities;
4) the main safety devices and equipment, facilities, layout and operation of the safety of;
5) fire fighting facilities and fire fighting equipment;
6) dust control Safety of anti-dust facilities and measures;
7) Storage, transportation, and use of hazardous substances;
8) Ventilation, lighting, and safe passage.
These contents, required to be systematic, comprehensive, clear, in line with the norms and standards of safety measures, and listed in a table according to the requirements of a certain format.
2, enterprise (plant-level) safety inspection form:
Mainly used for plant-wide safety inspections and safety production dynamics, for the safety inspection department for daily safety inspections and 24-hour safety inspections when used. Its main contents include the safety and reliability of each production equipment, facilities and devices, the key unsafe parts and unsafe points (sources) of each system;
1) the sensitivity and reliability of the main safety equipment, devices and facilities;
2) the storage and use of hazardous substances;
3) the completeness and reliability of the fire-fighting and protective facilities;
4) the operations Employee operation management and compliance and discipline;
Check to highlight the key areas of the source of risk factors and the impact of unsafe conditions and unsafe behavior, according to a certain format requirements listed in the table.
3, the professional safety checklist:
Mainly used for professional safety inspection or safety inspection of special equipment. Such as fire and explosion prevention, dust and poison prevention, anti-freezing and anti-condensation. Heatstroke prevention, pressure vessels, boilers, industrial gas cylinders. Power distribution devices, lifting equipment, motor vehicles, electrical welding, etc.. The content of the checklist should be in line with the requirements of professional safety and technical protection measures.
Such as the safety of equipment structure. Safety of equipment installation, safety of equipment operation and safety of operating parameters and indicators of safety, safety accessories and alarm signaling device safety and reliability, the main requirements of safe operation and special operations into the safety and technical assessment. According to certain format requirements listed in the table.