Scope of application: the adhesive is suitable for PVC polyvinyl chloride and other software materials and density board, molded boards, wood and other vacuum forming for paint-free doors, cabinet doors, furniture and other paint-free products.
Technical indicators: viscosity (mpas) 600 + 100
Solid content: 45 + 2%
Appearance: slightly blue-white liquid
Usage guidelines: the glue is a two-component use, add 5% of the curing agent mixing and stirring for more than 5 minutes, stirring and spraying, adding the curing agent of the glue must be used up within 8 hours. Adding curing agent improves the heat resistance and water resistance of the glue.
Operating conditions: substrate, environment and emulsion temperature: 10-25 degrees. Substrate water content 7-11%. Coating amount: 50-100%g/㎡, modeling and edge of the focus of spraying, the amount of spray glue is three times the plane. Equipment setting temperature: 120-180 degrees. Vacuum pressurization time: 120-240 seconds. Vacuum pressure: 8-10 bar. film temperature: 50-100 degrees.
Rinse the gun with water after use to prevent flocculation.
Storage temperature: 10-25 degrees.