1, the dimensions of the external dimensions of the figure "B" must be fully immersed in oil to avoid burning components. The heated oil should be non-corrosive.
2, SRY3-type working fluid level must be under the fasteners, size line "B" above.
3, melting asphalt, paraffin and other solid oils should be used to reduce the voltage, such as melting and then rise to the rated voltage. To prevent the concentration of power to reduce the service life of components.
4, found on the surface of the tube with carbonization, must be removed before use, so as not to reduce efficiency, or even burn components.
5, components should be stored outside the dry, if the insulation resistance drops to less than 1 megohm due to long-term placement, can be dried in the oven at about 200 ℃ for a number of hours (or will be components of the low-pressure through a number of hours), that is, or to restore the insulation resistance. 1, most of the hot air circulation in the box, high thermal efficiency, energy saving.
2, the use of forced ventilation effect, the box is equipped with adjustable air separation board, material drying uniform. Heat source can be steam, hot water, electricity, far infrared, a wide range of options.
3, the machine noise, stable operation. Temperature self-control, easy installation and maintenance.
4, wide range of application, can dry a variety of materials, is a general drying equipment. Scope of application
Hot air circulation oven is suitable for heating and curing, drying and dehydration of materials and products in pharmaceutical, chemical, food, agricultural and sideline products, aquatic products, light industry, heavy industry and other industries. Such as raw materials, traditional Chinese medicine, traditional Chinese medicine tablets, extracts, powder, granules, punch, water pills, packaging bottles, pigments, dyes, dehydrated vegetables, dried fruits and melons, sausages, plastic resins, electrical appliances, baking paint and so on.
The main technical parameters of the hot air circulation oven and related instructions:
1, the heating heat source steam, electricity, far-infrared, electricity and steam on both sides for the user to choose.
2, the use of temperature: steam heating 50 ~ 140 ℃, up to 150 ℃.
3, with electricity, far infrared temperature 50 ~ 300 ℃.
4, commonly used steam pressure 0.2 ~ 0.8Mpa (2 ~ 8KG).
5, the material has carbon steel, aluminum plate and stainless steel three.
With a uniquely designed strong blast air circulation system to ensure the stability of the temperature, temperature control system using digital temperature control, intuitive and eye-catching, with a reliability protection device, over-temperature alarm. Special requirements, the introduction of production lines supporting the customized design for users.
Use
1. Used for drying wood, paper, printing and dyeing, paint and so on.
The melting and heating of saltpeter and other salt substances.
3. Melting of low melting point alloys, such as molten lead furnace, molten tin furnace.
4. Building heating.
5. Heating moving air and still air.
6. Infrared radiation heating devices.
7. Low-temperature electric furnaces such as air-circulating industrial electric furnaces, electric furnace boxes, and so on.
8. Oil, water and other chemical liquids, plating tanks in the heating device.
9. Seawater electric distillation device.
10. Alkali and acid heating devices.
11. In the food industry, used to bake a variety of bread, cookies, pastries, water tunnels for electric heating devices.
12. Plastic products processing and molding extrusion device and rubber products molding vulcanization device.
13. Medical sterilization equipment, such as sterilizers, disinfectors.
14. Motor vacuum dipping paint equipment, heating, enameled wire drying device.
15. Various household electric heating appliances in daily life, such as electric stoves, electric ovens, electric rice cookers, electric frying pans, electric frying pans, water heaters, electric irons and other products.