Part 1:
XX Monthly Equipment Maintenance Work Summary 20xx XX Monthly equipment maintenance work is coming to an end, this month's equipment maintenance work is mainly embodied in the base station power supply protection, inspection, base station and repeater troubleshooting, etc., the main work of the month is summarized as follows, the details of the work in the details of the work is not here. The main work of this month is summarized as follows, the details of the work is not here to explain.
Existing problems
1, 20XX new construction of base stations and village through the project base station, so far due to various reasons acceptance has not yet been completed, and the acceptance of the problems of the base station has not been remedied.
2, this month, the reported problems have not been resolved, Goquan Pharmaceuticals base station window blocking will collapse, the pier station base station door nose de-welding, etc., the above problems can not be resolved by the Center so reported to the maintenance center for resolution.
This month's summary of base station equipment maintenance work this month's summary of base station equipment maintenance work base station equipment
1, so far this month did not complete the inspection of the base station has red flag village - Hongliu River, Ya Zi Quan, Shar station, Baishan Spring, Tula Root, Ya mining, magnetic sea, M1033, South Jinshan, Changhe Group Copper and Gold Mine.
2, (Shannan area power supply) this month to protect the Hami West line 6 solar base station 8 power supply more than 480 hours, the Hami South line 3 solar base station 7 charging more than 220 hours, the East line 6 solar base station 4 charging more than 240 hours, in addition to the solar base station on the gymnasium, Baiyang Gully, the Red Star two pastures, the Red Star four farms, the two fields of the second field, two companies, and other base stations to Charging. This month*** counted charging hours of about 970 hours.
3, with the completion of the urban 33 base station survey work twice, base station station space, power supply, storage batteries and other aspects of a base station transmission equipment. We hope that this kind of work can be carried out in the future to save time and unnecessary waste of resources.
4, this month, the completion of the mountainous areas of the first point, the second point of the replacement of the old carrier frequency and the replacement of the two ranch fault carrier frequency, and the pier station, the red layer of the station, the thirteen rooms of the temporary expansion of the work of the part of the base station idle carrier frequency and capacity reduction work.
5, with the completion of 09 years of new construction base station access control installation with the work.
With the network optimization center to complete the urban part of the base station antenna adjustment work. This month's tower antenna feeder maintenance work summary of this month's tower antenna feeder maintenance work summary
1, this month to complete the Hami West line within the scope of the wind area of 14 base stations antenna feeder, antenna, cable, and the tower verticality and other aspects of the inspection, for the feeder card off in a timely manner to fill or tie fixed.
2, complete the telecommunications *** enjoy our tower, install equipment on our tower is standardized whether it affects our communication facilities and other aspects of the inspection.
3, the train station, the city court of the two downtown base station of the simple bracket to strengthen the processing of the original use of all the replacement of tie-banding, such as pulling the line to check the fastening.
Another downtown Fangyuan Hotel and several other base stations were inspected accordingly.
2, completed the Hami East Line frequency repeater adjustment test work, downtown repeater monitoring card installation and commissioning work.
3, complete the wood wells, Numaohu Annex, Baishan molybdenum mine, regional hotels, Xiagou Reservoir, Shadunzi, Huadian Building, China Railway Bureau and so on repeater equipment failure. Internal training work in this month's internal training work is not in the technical training to start, there is for the safety of production, protection of maintenance personnel safety, security equipment safety, eliminate vehicle accidents and so on on the safety aspects of the knowledge of the study, so that the maintenance staff to put the safety of production to eliminate accidents in any work in the first place.
Part II:
XX month in accordance with the instructions of the center, the second 100 days of production safety in 20xx accident-free activities. The guiding ideology of the activity is to adhere to the safety first, prevention-oriented policy, firmly establish the scientific concept of development; adhere to the creation of intrinsically safe enterprise as the goal, and further improve the environment, quality, responsibility for the three construction; adhere to the strategy of science and technology security and business security, improve the level of safety and security of production; adhere to the safety education and training, and comprehensively improve the quality of staff safety technology; adhere to the peace of mind and anti-pride broken full, to ensure safety and security of production, realize the march to zero. Production, to realize the zero march. Specific work is as follows
1, equipment overhaul: XX month of the sub-factory shutdown overhaul time is less, three overhaul class **** equipment overhaul
Completed 40 overhaul tasks, of which the overhaul of the first class of 8, overhaul of eight classes, overhaul of the second class of 8, overhaul of the third class of 24 items. The big overhaul projects are: Daliuta plant 360 crusher replacement rollers, plates and roll bearings, 312 bucket elevator pinch bucket, 316, 427, 428, 429 fine coal sieve welded beams; on the Bay plant 308 sieve machine machine replacement, 319 filter press canister scraper replacement reducer, 221 sieve machine welded sieve state; complementary Lianta plant 305 sieve machine welded exciter beams and sieve state, 329 sieve machine Side state to play crack holes, scraper replacement reducer to replace the input shaft oil seal; 827 Yujia Liang plant 414 high-frequency sieve frame beam welding, 406 fine coal sieve exciter beam welding, 303, 305, 323 sieve machine sieve state crack treatment, 465 crusher to replace the rollers, 412 magnetic separator to replace the magnetic drum; Ulaan Mulun plant 304 shallow trench to replace the scraper, chain, the upper lower down the road and the head and tail wheels, 213 Scraper replacement reducer, and so on. Overhaul one, two, three classes also use no time out of maintenance, welding rollers, processing wind tube.
XX month due to non-standard processing tasks and tight time and to be repaired equipment spare parts, such as the reason to repair the old equipment is relatively small, *** counted 9 items. Non-standard processing is full, the factory through reasonable arrangements for personnel off-duty and distribution tasks to squeeze time * completed the tasks, the main production and processing: Ha wash shallow trough flow bottom plate, highway speed bumps installation of 3, on the Bay Wushu Sun wash wind tube about 120 meters, a number of support frame 24, Wushu coal quality test pass 6, air conditioning cover 20, fleet heater 6, El wash magnetic separator for cylinder skin 1, cyclone dust collector 1, Cafeteria anti-odor cover, 1 fleet box, 4 large laundry racks, patch welding tooth rollers. Machining projects amounted to. In addition, more than 30 machine-added projects, thus saving a lot of money, reduce costs, improve the efficiency of the center's equipment operation, for the normal and orderly production to provide a strong guarantee.
2, basic management: XX month in accordance with the requirements of the center, pay close attention to the construction of the team, the basic management of the team
construction work is refined to each link, organize the basic information of the team construction work, increase the team safety activity records, learning records, etc.. Strengthened the team's assessment efforts, refined the team's assessment standards, the assessment is implemented into each day's work. According to the central team building assessment standards assessment of the team, re-revised the team assessment form, the new team assessment content is mainly from the quality standardization, work tasks, labor attitude, overhaul quality, safety awareness, learning and innovation in six aspects of the assessment, the monthly assessment scores and the month's salary linked to the work of all the work of the team to get good rewards, poor penalties. According to the actual situation, mainly for the mechanical department of this month's problems, strengthened labor discipline. Strengthened the site maintenance management, always adhere to the leadership of the shift maintenance system.
3. The implementation of integrated management system and NOSA
XX month integrated management system assessment results 3. In order to reverse this situation as soon as possible and improve the comprehensive management system of safety, construction and environmental quality of my department, the leadership attaches great importance to all the items that do not meet the safety, construction and environmental standards of the workshop to carry out a comprehensive rectification. At the end of XX month has been basically rectified, in the field, the workshop's warehouse, plant, each shift overhaul room, etc. made a unified deployment, in accordance with the requirements of the comprehensive management system of safety, health, environment and quality unified planning, and gradually rectify. The problems identified by the Safety Supervision Department and self-inspection and self-examination, and irregularities and the existence of hidden dangers to carry out a thorough rectification, without sparing any dead ends and dead surfaces.
4, safety work: XX month according to the center of the document instructions, in the second quarter to carry out the machine safety work
Electricity safety rectification and dust management as the main content of the second 100 days of production safety in 20xx without accidents, for the whole year to lay the foundation for the safety of the production work.
10 interns of the Elmwood Industrial School divided into factories, to be the focus of safety management as a group of people, the strict implementation of the three-tier safety training and education system, while 72 hours of safety training must be carried out, the signing of the master and apprentice safety package agreement, and in the Safety Supervision Office for the record of the training and the issuance of the certificate of induction procedures, and to do a good job of the three confirmations of the class to put an end to the single person single post, independent posting or Special types of work and other violations.
According to the washing and processing center in the first quarter of the accident-prone analysis and safety work priorities, every week on the accident-prone personnel to carry out a targeted safety learning and accident reflection activities, the operation of the guardian, and at the same time, these personnel on-site work behavior random spot checks, to the violation of the personnel to give a severe crackdown. And in conjunction with the fourth quarter of the unsafe behavior to find activities, actively carry out self-examination and self-examination activities, at least three violations or attempted accidents should be found each month, and a comprehensive and serious analysis, criticism and self-criticism of education, to stop accidents from the root cause.
In order to strengthen the staff's safety awareness, the department for the new recruits, new assignments of college students, and temporary workers, the use of pre-shift meeting time from time to time to train and educate them, will be the washing center over the years of the accident cases to explain, analyze the causes, preventive measures and we should learn from the lessons. When the site maintenance, the masters effectively fulfill the rights and obligations in the master-apprentice agreement, so that they can understand the safety precautions in practice, learn how to protect themselves and improve self-prevention ability.
Seriously implement the fire safety and winter three defense work. To fire and winter frost work included in the important content of safety management, the department's winter three security risks to carry out a comprehensive investigation to ensure safe production in winter. The newly assigned college students, interns and temporary workers were tested on safety regulations, and those who failed were given a supplementary test to enhance safety awareness.
5, training: according to the department to prepare the "20xx training program" I Department of training in this month
Carbon dioxide protection welding, pliers basic skills knowledge of the training, the use of theoretical and practical combination of training. As the center in this month's organization to carry out a technical competition, the department organized personnel to participate in the competition of personnel to carry out targeted training. By the new allocation of college students on the material, drawing, iron and carbon balance diagram for a detailed explanation. In order to better carry out the creation of a learning team to be a knowledge-based staff activities, the Department requires the team every day safety, business and technical learning has a plan, records, and results, and strive to improve the overall quality of staff.
The next training work needs to be strengthened, in accordance with the training program and overhaul time with the opening of the training content into practice, in strict accordance with the training program. Requirements in the process of explaining the requirements of each person in the opening of the pre-shift meeting must bring a pen and notebook, to record some important content. And requires each lecturer must highlight the key points, relevant to the actual work of the Ministry, pay attention to the lecture method, targeted, and try to make some theoretical things popular, so that we can easily learn and understand.
In short, XX month we are relatively * completed the work, but also exposed our many shortcomings, the teams on the staff technology and business level training awareness and attention to be strengthened. The team of the risk assessment of the major overhaul project has the phenomenon of coping with the phenomenon of overhaul, the site of temporary workers and new employees safety education is insufficient, the next step of our focus is, to strengthen the ideological quality of construction and safety management of employees, especially the temporary workers and the new allocation of college students safety management, and to further strengthen the staff safety education and technical and business level of learning.
Monthly work plan
20xx XX month work plan
1, under the leadership of the center under the unified command, to serve the plants for the purpose of actively cooperating with the plants, * to complete the overhaul of the month of May;
2, to strengthen the work of inspection, according to the actual situation as much as possible to go to the branch plants to carry out the repair work. The situation as much as possible to go to each branch of the inspection, to assist the plant in advance to find hidden equipment, to avoid accidents;
3, continue to improve and sound safety, health, environment and quality of the integrated management system, the organization of the content of the internal data and risk assessment in a new level, will be safety, health, environment and quality of the integrated management system of the content of the application of the management of the practical management to really improve our management level;
4, safety work: grasp the safety of this month's work, reasonable arrangements for personnel off duty, to ensure that the reasonable rest of the maintenance personnel out of the reasonable rest, do not let an employee in the fatigue of the state of duty. In order to ensure the personal safety of each employee, in the field overhaul to be responsible for the implementation of the unified command by the team leader, departmental leaders to supervise the implementation of the other personnel should pay attention to the appropriate cooperation. And strengthen the management of the new sub personnel, temporary workers.
5, comprehensive training work, the use of pre-shift meeting half an hour of training in various aspects, so that the new sub personnel as soon as possible to familiarize themselves with the scene and the equipment, and in May according to the plan for the training of the metal process, hydraulic transmission basics and practical operation of the essentials of the relevant knowledge, I hope that the staff to take the good results;6,
As a result of the previous period of time Put all the energy on the sieve machine, did not catch the automatic tape winder processing work. In the beginning of May, the maintenance class in the absence of out of maintenance to strengthen the implementation of automatic tape machine processing;
7, according to the center of the document instructions, in the second quarter of the second quarter of the electromechanical safety rectification and dust management as the main content of the second 100 days of production safety in 20XX without accidents, for the whole year of production safety to lay the foundation for the work.