I believe that many young friends are more familiar with water-cooled radiators, which means liquid-cooled radiators. The biggest highlight of the water-cooled radiator is that, compared to the traditional air-cooled radiator, it has a stronger cooling capacity, effectively solving the problem of poor summer computer cooling. The first thing you need to do is to get the best out of your computer, so you can get the best out of your computer.
What is a water-cooled radiator
Water-cooled radiators generally refer to liquid-cooled radiators. The cold radiator system utilizes a pump to loop back the coolant in the radiator tubes and dissipate the heat. The heat absorbing portion of the radiator (called the heat sink box in liquid cooling systems) is used to absorb heat from the computer's CPU, northbridge, and graphics card. The heat absorbed by the heat sink is exhausted to the outside of the computer through a heat sink designed on the back of the chassis.
Today's personal computer cooling field, air-cooled radiators, although basically out of the high-noise violent heat dissipation of the circle, but generally towards the large volume, more heat pipes, and the direction of the development of super-heavy weight, which the user in the actual use of the radiator and the installation of the user has brought a great deal of inconvenience, but also on the computer parts of the weight of the stress ability to bring a great deal of the test.
In light of these post air-cooling dilemmas, liquid-cooled coolers have gradually been accepted by the majority of computer users.
As a mature cooling technology, liquid cooling has been widely used in industrial applications such as automotive and aircraft engine cooling. The application of liquid cooling technology in the computer field is not because air cooling has reached its end, but because the cooling speed of liquid is much higher than that of air, so liquid cooling radiators tend to have a good cooling effect, and at the same time, the noise can also be well controlled. Because of all the advantages in terms of cooling efficiency and quietness, liquid-cooled cooling also appeared soon after the popularity of air-cooled cooling in computers. Happily, today, liquid-cooled cooling is becoming more popular in the computer space, and this is due to the fact that liquid-cooled cooling has made great strides in terms of safety and stability.
How to install a water cooling radiator
Step 1: Preparation
Preparation is the hardest part. Before installing a water cooling system, the motherboard must be removed. This means that you must first open the motherboard case and unplug all the cards and cables from the motherboard. When pulling out the cards and cables, be careful to hold the connector part of the force,
do not pull the connecting cable force. (Note: Make a mental note of the connection configurations, as you'll have to splice them back in later).Step 2: Remove the Heat Sink
I. After removing the motherboard, remove the heat sink as well. The motherboard heatsink is located in the center of the wafer and has a fan on it. Be careful not to damage the chips on the motherboard. Be careful not to use too much force when removing it, and use gentle force because the hot glue has firmly bonded the chip to the heat sink. Then use alcohol to remove the exposed portion of the top of the chip and apply hot glue.
Second, install the water-cooled radiator grommets on the back of the motherboard, and according to the type of CPU slot (775775, 1150, 1156) in the corresponding screw holes, install the special fixing screws, and after installation, the motherboard can be installed inside the motherboard case.
Third, the next step is to install the CPU water cooling cooler on the front of the motherboard on the CPU.
Fourth, then the water cooling radiator is installed on the CPU,
Here, note that you need to install the fixing snap screws, also installed.
7. At this point, we have successfully completed the installation of the CPU water cooling radiator. Water-cooled radiator installed successfully, users can also enter the Bios to set the CPU fan speed, etc., we adjust according to their own situation, flexible adjustment to achieve better quiet and energy-saving effect, the default general do not regulate can also be.