1, with the development of technology, computer-controlled laser engraving, as long as the drawing of a good image, and then set the parameters, then as long as the fixed plexiglass plate can be engraved. Then plexiglass display shelf crafts generally use laser engraving, and engraving is carving, engraving, molding Three words of the composition of the method of production process.
2, plexiglass engraving process is generally divided into the preparation of drawings, processing period. Plexiglass engraving processing drawings are now generally used CorelDRAW file-based and then imported into the computer to go. Followed by laser engraving processing time to pay attention to the smoke, be sure to open the smoke blowing equipment, because the laser if the regulation is too large is easy to catch fire, so this point should be firmly abide by.
3, plexiglass display shelf process is divided into: material, laser engraving or laser cutting, trimming, polishing, hot bending, silk screen, punching, gluing and bonding, packaging.
4, plexiglass display shelf is generally processed from the plexiglass plate, the use of technology is divided into: open, laser engraving or laser cutting, trimming, polishing, hot bending, silk screen, punching, gluing and bonding, packaging.
5, open material: generally look at the design to determine the size of the plexiglass display rack with open material machine, generally use laser cutting and mechanical cutting of these two, the former high precision, but also not a waste of material. Generally use different plexiglass sheets to cut, generally will be protected with paper, lest it be scratched and scratched when moving.
6, laser engraving or cutting: after the material is good or directly with the acrylic plate engraving, according to the first design of the pattern or graphic for the initial engraving or cutting, here first of all pay attention to the ventilation of the laser engraving machine, control the temperature, lest the acrylic plate burns up.
7, trimming: generally open or engraved out of the plate is relatively rough, so to repair the burrs, so as to ensure that it will not hurt the hand, but also to make the product out of the rounded products, increase the use of satisfaction.
8, polishing: polishing is divided into diamond polishing, grinding wheel polishing, cloth wheel polishing and fire polishing. Diamond polishing to use professional polishing machine, grinding wheel polishing is more rough processing, generally the last product out of the cloth wheel polishing, cloth wheel polishing after waxing will restore the acrylic material after the sense of clarity and transparency, fire throwing is generally used for polishing burrs, which requires the master precise and rapid fire throwing, slow and easy to burn the product.