Gypsum line is one of the final pieces that we will not ignore in the actual process of decoration, its application can help us to a certain extent to achieve the desired effect in the later stage, but also can avoid many unnecessary troubles. So today's introduction is also based on this point of view of the information, including manufacturers of gypsum line recommended, as well as more practical information: identification of gypsum line products step by step method and precautions. At the same time, on the intention to start the plasterboard factory friends, you can also learn the relevant aspects of the preparation content.
One, the production of gypsum line equipment manufacturers which is good?
Consider Gaomi Furui Gypsum Equipment Co. Our factory specializes in the production of high quality gypsum line equipment, gypsum lines, gypsum line molds, Roman column molds, ceiling molds, gypsum line bags, gypsum line special release agent, fast sticking powder special adhesive, gypsum line special glass wire and other products, quality assurance.
The products of our factory have been all over the country and exported to Russia, Southeast Asia, Africa, etc. Our factory is equipped with professional technicians, free training in gypsum line making technology. Fast sticking powder formula, stucco plaster formula, Lafarge embedded plaster formula, putty powder and other formulas, a full set of technology package will teach.
Two, want to run a plaster line production plant what equipment is needed
In the production of gypsum, the most important is the mill processing equipment.
The mill is widely used in metallurgy, building materials, chemical industry, mining and other fields of mineral materials grinding processing. According to the fineness of the ground material and the fineness of the discharged material, the mill can be divided into Raymond mill, longitudinal pendulum mill, high-pressure roller mill, high-pressure micro-powder mill, straight-through centrifugal mill, ultra-pressure trapezoidal mill, three-ring intermediate-speed mill six types of mills.
High-pressure roller mill Raymond mill to be composed of the host, analyzer, blower, finished cyclone separator, piping devices, motors and so on. Among them, the host is composed of the frame, air inlet worm shell, shovel knife, grinding roller, grinding ring, cover and motor. The auxiliary equipments are jaw crusher, dustpan elevator, electromagnetic vibrating feeder, electric control cabinet, etc., which can be flexibly selected by users according to the site conditions.
Gypsum powder processing equipment price consult online experts, experts provide gypsum powder processing equipment latest price.
Three, gypsum line introduction
Gypsum line is a house decoration material, the main interior decoration. Can be with a variety of patterns practical and beautiful. With fire, moisture, heat preservation, sound insulation, heat insulation function, and can play a luxurious decorative effect.
Gypsum is a gas-tight cementitious material, gypsum relief decorative products must have the corresponding thickness to ensure that its intermolecular affinity to the best degree, so as to ensure a certain service life and integrity and safety during the use of the period. If the gypsum relief decorative products are too thin, not only the service life is short, but also affect the safety.
Low-quality gypsum relief products are cheaper than 1/3 to 1/2 of the price. this low price is attractive to the user, but often after the installation of the use of the defects (such as yellowing, cracks), resulting in regret
Four, identify
1, pattern depth
General plaster relief decorative products pattern pattern of concave and convex should be more than 10mm, and the production of fine. In this way, after the installation, and then by the surface paint treatment, can still maintain the sense of three-dimensional, reflecting the decorative effect. If the pattern of plaster relief decoration products is shallow, only about 5-9mm, the effect will be much worse.
2, surface finish
Since the pattern of gypsum relief decorative products can not be sanded when installing and painting, the requirement of surface finish is higher.
3, knocking sound
You can use your fingers to gently knock on the gypsum line, if the sound is muffled more than inferior gypsum line, such as if the sound of the knocking sound crunchy, and even ceramic-like sound, then it is on behalf of the gypsum line is good quality is genuine. Check the elasticity of gypsum board, knock with your hand, make a very solid sound that the gypsum board is strict and durable, such as making a very empty sound that there is a bulging phenomenon in the board, and the texture is not good. Hand weight can also measure the strengths and weaknesses of the plasterboard
The above were introduced from the perspective of three groups of people, namely, consumers who purchase plasterboard products and users who use them, in addition to friends who are interested in investing in the opening of plasterboard factories, and most of the friends have no basic knowledge of the relevant aspects of the products and are not able to identify the appropriate products as effectively as the professional operators and technicians, so it is important to learn from the above. The product, so learning the information mentioned above is very critical to help you avoid additional consumption as much as possible, the use of inexpensive and good gypsum line to achieve the desired results.
Toobabbit online free of charge to provide you with "each decoration offer, 1-4 local decoration company, 3 sets of decoration design scheme", and decoration to avoid the pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~