The cooperation agreement and contract of machinery and equipment is one of the rights protection methods used by modern people to protect their own interests. As long as one party violates the contract, the other party can bring legal proceedings, so we must read it clearly when signing the contract. The following is the cooperation agreement on mechanical equipment, for reference only!
Mechanical equipment cooperation agreement 1
Buyer: ×× (hereinafter referred to as Party A)
Supplier: (hereinafter referred to as Party B)
Signing place: ××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××
I. Subject matter of the contract (name, specification, model, unit price, etc.). )
Two. Contract Amount Total contract amount: in words: RMB 10,000 only. Time and method of payment
1. This contract shall be paid in three installments: within days after the contract comes into effect, Party A shall pay Party B% of the total contract amount; Party A shall pay% of the total contract price to Party B within one week after the equipment installation and debugging are completed and the preliminary acceptance is qualified. Party A shall pay% of the total contract price to Party B within one week after the normal operation of the equipment and formal acceptance by both parties; Pay off the balance after the warranty expires. (Change and modify according to the relevant provisions of the bidding documents)
2. Friendship link:
3. Two days before the payment of each contract, Party B shall issue a VAT invoice with the same amount to Party A (agreed upon according to the actual situation).
Four. Time, place and method of delivery. Delivery time: within days after the contract comes into effect.
2. Place of delivery: Name of consignee: (name of contractor) Address:
3. Delivery method: Party B is responsible for the transportation of goods.
4. Freight mode: automobile transportation.
5. The delivery date of the contract equipment is after Party B has transported it to Midea Industrial City, installed and debugged it, put it into use and passed the acceptance of Party A. (What is the delivery date and delivery according to the actual situation? If it is agreed that the supplier regards the installation, debugging and commissioning of the equipment as delivery, the time when the equipment passes the acceptance of Party A shall be clearly agreed. ) Party A picks up the goods at the delivery place agreed in the contract, and Party B shall bear the transportation fee and transportation insurance premium. The risk of damage or loss of contract equipment shall be transferred to Party A after Party B completes the delivery.
6. Party B shall inform Party A of the delivery situation (delivery time, number of pieces, etc.). ) Within one working day after the delivery of the contract equipment, Party A shall promptly pick up the contract equipment consigned by Party B after it reaches the place specified in the contract.
7. When Party A takes delivery, it shall check the packaging of the contract equipment in the outer box. The contract equipment can only be picked up if the outer box packaging is intact. If the outer box packaging of the contract equipment is damaged or the packaging quantity of the contract equipment is found to be inconsistent, Party B shall be informed within working days, so that Party B can handle the claim procedures for the contract equipment in distress.
8. Party A shall properly receive and keep the contract equipment delivered by Party B. Party A shall be responsible for properly keeping the goods sent by mistake or repeatedly, and notify Party B in time, and the expenses arising therefrom shall be borne by Party B. ..
9. If Party A requests to change the delivery place, it shall notify Party B fifteen days before the delivery date stipulated in the contract. The transportation expenses increased due to the change of delivery address shall be borne by Party A. ..
Verb (abbreviation of verb) Time, place, standard and method of acceptance.
1. Acceptance time: Party B shall complete the equipment installation and commissioning within the day after the contract comes into effect, and Party A shall arrange preliminary acceptance within the day after the installation and commissioning. Within days after the contract comes into effect, the equipment passes the acceptance of both parties, and Party A will issue an acceptance certificate.
2. Acceptance place:
3, acceptance criteria:
Intransitive verb door-to-door service (it is recommended to make an agreement according to the actual situation)
1. The on-site personnel of the supplier shall abide by the factory rules and regulations of the buyer, and Party B shall be responsible for any violation.
2. The supplier's field personnel should take care of themselves.
Mechanical Equipment Cooperation Agreement II Party A: (hereinafter referred to as Party A)
Party B: (hereinafter referred to as Party B) After friendly negotiation, Party A and Party B signed the agreement on agency sales (equipment name) on the principle of mutual benefit and common development as follows:
I. Party B is responsible for the agency equipment and price:
1, agent equipment:
Party A officially authorizes Party B (equipment name) to sell the equipment and is responsible for the sales of the equipment in this area.
2. The model of the equipment represented by Party B is _ _ _ _ _ _ _ _, and the price of the equipment (in words) is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
See the attachment for the configuration.
Second, the equipment sales payment method:
1. Payment method for equipment sales:
(1) Payment time: 60% of the total contract amount shall be paid within three working days after the contract is signed, 30% within three working days after the goods arrive at the delivery place, and 10% within three working days after the equipment installation and debugging is completed.
(2) Payment method: Finally, Party B will directly remit the equipment sales money to the account designated by Party A. (3) Party A's bank:, account number:.
Three. Rights and responsibilities of Party A and Party B
1. Party A shall fully cooperate with Party B in technology and provide due technical support and after-sales service; The economic losses caused by equipment quality problems or technical problems shall be borne by Party A; However, all expenses incurred during the whole period of equipment sales and operation shall be borne by Party B. ..
2. Party B has the exclusive right to handle the equipment in the agreed area, and Party A shall not authorize a third party. Party B can independently develop and sell the equipment market in its own name.
3. The interests of both parties shall be distributed according to the following terms.
1. Party B sells the equipment at the equipment price provided by Party A, and% of the sales price is Party B's due benefit.
2. Party A and Party B agree on the lowest price of the equipment, and Party B pays the loan to Party A according to this price. Party B can set its own price when selling equipment, and Party A shall not interfere.
4. If Party A fails to receive the sales amount of the equipment in full and on time, Party A has the right to delay the payment of the corresponding commission to Party B, and Party B has the obligation to recover the sales amount of the equipment purchaser.
5. All debts, creditor's rights and all economic disputes arising from Party B's responsibility for the sales and promotion of equipment authorized by Party A are related to.
It has nothing to do with Party A, and Party B shall bear all relevant legal responsibilities by itself.
6. During the period of equipment sales authorized by Party A, Party B shall not engage in any behavior that damages fair market competition or Party A's external image and interests, otherwise Party A has the right to terminate the agreement at any time.
7. Party B must abide by all the terms of the technical confidentiality agreement, intellectual property protection contract and project agency agreement of the headquarters.
8. Without the consent of Party A, Party B shall not transfer the contents of this Agreement to other parties.
Four. Sign relevant agreements
Party A and Party B must sign the Trademark and Intellectual Property Protection Agreement and the Intellectual Property Protection Contract. The above two agreements can only take effect when they are signed at the same time as this agreement, and have the same legal effect as this agreement.
Verb (abbreviation for verb) Term of agreement and place of signing.
1. Term of the agreement: This agreement shall come into effect as of the date of signature and seal, with a validity period of one year, and the previously signed agreement shall be invalid;
2. Place of signing this Agreement:.
Termination of intransitive verb agreement
1. If Party B violates Party A's management regulations or damages Party A's image and interests during the agency period, Party A has the right to unilaterally terminate this agency agreement with Party B;
2. Party B shall not sell, mortgage, license or disclose Party A's intellectual property rights without authorization, otherwise Party A has the right to unilaterally terminate this agency agreement with Party B and pursue Party B's legal responsibilities;
3. When Party B fails to perform this agency agreement, Party A has the right to unilaterally terminate this agency agreement signed with Party B. ..
Seven. Settlement of agreement disputes
During the execution of this agreement, if there is any dispute between Party A and Party B, both parties can settle it through negotiation. If negotiation fails, an economic lawsuit may be applied to the local people's court with jurisdiction.
Eight. Text of agreements and annexes
1. This agreement is made in duplicate, one for each party, with the same legal effect, and the copy is invalid;
2. The annexes to this Agreement include:
Copies of Party B's business license, other company licenses and legal representative's ID card;
Agent management system
Equipment configuration and related documents
Agency commitment letter
Trademark and Intellectual Property Protection Agreement and Intellectual Property Protection Contract.
Party A: Party B:
Agent:
Date: Date:
Mechanical Equipment Cooperation Agreement 3 Party A:
Address:
Legal representative:
ID number:
Party B:
Address:
Legal representative:
ID number:
In order to develop environmental protection and energy industry, Party A and Party B have agreed to become strategic partners through consultation and reached the following cooperation agreement:
1. Party A is responsible for the design, development and production of _ _ _ _ _ _ _ _ _ products.
2. Party A and Party B jointly set up a sales organization to be responsible for the promotion and sales of _ _ _ _ _ _ _.
3. Party B is responsible for marketing and diplomatic liaison, while Party A is responsible for technical training and after-sales service. After-sales service personnel shall be stationed in various places, and local personnel shall be employed as much as possible, and the salary and expenses shall be borne by the sales organization. The warranty period of the machine is _ _ _ _ _ _ years. Within half a year, Party A shall bear all the wear and tear expenses of machine parts and molds.
4. Party A shall supply the sales organization with the ex-factory price of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. Before a large number of goods are used, the sales organization shall notify Party A one month in advance and prepay part of the machine money for Party A to prepare goods.
5. After Party A completes the production task, it shall deliver the goods to the sales organization in time. After receiving the machines, the sales organization shall remit the balance of this batch of machines to the account designated by Party A within two days according to the ex-factory price after deducting the prepaid money.
Six, the sales organization is responsible for the sales of machines that arrive quickly. The sales price shall not be lower than the unified price of Party A's similar equipment in the market.
Seven, the sales organization at the end of each month to calculate the book profit, except the standing cash100000 yuan for daily expenses, the rest of the sales net profit, according to the proportion of both parties, in the next month before the bank _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Eight, in order to encourage sales organizations to work hard, the annual sales volume is divided into steps, with one year as a calculation cycle.
Nine, the financial parties of the sales organization shall send people to jointly manage, and the management settlement shall be implemented according to the accounting method.
X. Party A is a productive enterprise, so during the cooperation period, Party A will continue to carry out the sales work of the factory and can cooperate with other institutions in various places to carry out the sales work, and Party B has no right to restrict Party A's sales work in other areas.
XI。 Party B shall not designate another manufacturer to produce the same products as Party A's _ _ _ _ _ _ _.
Twelve. This agreement is signed in the form of _ _ _ _ _ _ _ _ _ _
Party A: (signature and seal)
Address:
Contact information:
Date of signing this contract: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ \
Party B: (signature and seal)
Address:
Contact information:
Date of signing this contract: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ \