METTLER TOLEDO's electronic balance is the most important part of METTLER TOLEDO's products. It is mainly divided into AL series analytical balance, PL series precision balance, PL-L series portable balance, ML series analytical balance, ML series precision balance, MLE series precision balance, MS series analytical balance, MS series precision balance, MSE series precision balance, MSE series industrial balance, XS series micro balance, XS series analytical balance, XS series precision balance, XP series micro balance, XP series micro balance, XP series precision balance, XP series micro balance, XP series micro balance, XP series micro balance, XP series precision balance, XP series micro balance, XP series micro balance, XP series micro balance, XP series micro balance, XP series micro balance, XP series micro balance, XP series micro balance, XP series micro balance, XP series micro balance, XP series micro balance. series microbalance, XP series analytical balance, XP series precision balance.
In the daily use, if not the correct use of electronic balances are prone to failure, today and everyone to share the METTLER TOLEDO electronic balance common failure information and solutions.
Detailed error information and causes as shown:
Solution:
1, overload → empty the pan, set zero (tare)
2, underload → check the pan placement is appropriate
3, unstable (tare or adjust) → wait for the balance to stabilize the key, to maintain the stability of the weighing environment → if necessary, remove the pan and clean
4, there are no common faults and solutions to METTLER TOLEDO electronic balance. p>
4. Failure to place or misplacement of calibration weights → Place the required calibration weights
5. Use of reference weight size (piecewise and percentage weighing) → Increase the reference weight
6. Internal error → Contact METTLER TOLEDO Customer Service
7. Misplacement of the wrong pan, defective pan, or unempty pan → Place the correct pan or empty it
8. /p>
8, no display: not plugged into the AC power adapter → detection of AC power
battery or rechargeable batteries run out of power → will be connected to the AC power adapter on the power supply
Electronic balance maintenance methods:
Electronic balance after a period of time, the performance of its ability to remain unchanged is called stability. Factors affecting the long-term stability of the sensor in addition to its own structure, mainly the use of the environment. Therefore, to make the sensor has a good stability, must have a strong ability to adapt to the environment. Before selecting the sensor, the use of the environment should be investigated, and according to the specific use of the environment to choose the appropriate sensor, or take appropriate measures to reduce the impact of the environment.