What forms are usually used on the floor of a purification workshop? Hunan Chunzhen Purification Engineering will give you the answer!
PVC anti-static flooring and epoxy resin floor paint are usually used on the floor of purification workshops.
Commonly used materials for purification workshop floors:
01 Project name: PVC floor
Product features:
1. Wear-resistant and corrosion-resistant , stable performance
2. Good decorative effect and convenient construction
3. The base material is semi-rigid PVC plastic
4. No sparks and resistance are produced. Burning
Construction technology:
1. Clean the ground, remove floating and sinking, position and lay the reference line
2. Lay out the grounding net (copper foil), and apply Apply conductive glue
3. Pave and roll PVC floor
4. Open 4mm electrostatic grounding
Applicable places: electronics factory, semiconductor factory, Optoelectronic industry, packaging products, electromechanical room, automobile industry, etc.
02 Anti-static PVC floor
Product features:
Direct-lay PVC anti-static floor is very flexible , uniform structure, composed of colored polyvinyl chloride PVC sheets coated with special conductive liquid on the surface, and statically extruded into solid PVC blocks that are permanently conductive, have low static voltage on the surface, do not absorb dust, have uniform specifications, exquisite patterns and colors lasting.
Construction technology:
1. Base surface treatment.
2. Leveling with self-leveling cement.
3. Apply conductive primer port
4. Lay copper foil.
5. Attach PVC board.
7. Welding port
8. Surface cleaning port
Applicable places: Suitable for program-controlled computer rooms in telecommunications, electronic power, microelectronics, medicine and other industries. Computer rooms, electrical control rooms, purification workshops and other places that require purification and anti-static.
03 Project Name: Raised Floor
. Product Features:
1. Systematic anti-static capability
2. High-quality fire protection .Moisture-proof performance
3. Bearing capacity
4. Good stain resistance
.Construction technology:
1. In a clean environment Mark lines on the ground
2. Assemble the bracket beams
3. Adjust the level of the beams and tighten the screws
4. Lay the raised floor
5. Clean the floor surface after construction is completed
Applicable places: electronic factories, semiconductor factories, optoelectronic industries, mechanical and electrical rooms, constant temperature and constant room laboratories, level 100 dust-free workshops, etc.
04 Project name: Epoxy resin self-leveling floor flow
Product features:
1. Wear-resistant, anti-slip, anti-bacterial and anti-mildew
2. Good solvent resistance, acid and alkali resistance
3. Good performance, strong malleability
4. Seamless, smooth and beautiful nails, easy to clean and maintain
Construction Process:
1. Polish the floor, sweep and vacuum
2. Apply sealing primer
3. Putty (mid-coat)
4. Polishing and vacuuming
5. Self-leveling surface
Applicable places: electronics factory, electrical appliance factory, food factory, cosmetics factory, packaging factory, textile factory, Garment factories, etc.
05 Project name: Epoxy resin anti-static self-leveling floor
Product features:
1. This product is an anti-static floor The environmentally friendly resin floor coating with electrostatic function, two-component supply, has good flow
, full film formation, and low mixing viscosity;
2. Easy construction, no riveting and defoaming The roller has strong adhesion and can bear the load of swollen feet;
3. It is wear-resistant and compressive, and can effectively eliminate and prevent the generation of static electricity or electromagnetic waves;
Construction technology:
p>1. Substrate treatment: polish and clean the floor, the substrate is required to be dry and free of hollows;
2. Primer coating: conductive primer coating;
3. Laying copper foil: lay crosswise horizontally and vertically;
4. Intermediate coating: apply anti-static intermediate coating according to the thickness of the ground on which it falls;
5. Topcoat : Wok-shaped environmental anti-static self-leveling paint.
Applicable places:
Suitable for communication equipment manufacturers, chip manufacturers, S and M workshops, optical instrument factories, laboratories and other places with high anti-static requirements.
06 Project name: Cement-based self-leveling floor
Product features:
1. Quick construction and rapid solidification. Stable performance, strong adhesion, easy to clean and maintain.
2. Non-toxic, odorless and not easy to burn.
Construction technology:
1. Base surface requirements: Remove dust and oil, fill and repair blisters and pores, and soak the base surface with clean water;
2 . Interface treatment: SPR1131 interface agent needs to be applied to the treated tomb surface. It can be applied when the surface is still wet. When constructing on the base surface with high water absorption rate, two layers should be applied to achieve the best effect;
3. Powder mixing: Slowly put the self-leveling cement into a rainproof bucket with appropriate amount of clean water. Use an electric mixing tool to stir evenly
4. Construction: Pour the mixed slurry slowly On the treated base surface, let it self-level. For local uneven areas, you can use a steamed bun knife to assist the leveling process to achieve a complete spin. For areas with bubbles, use a defoaming roller to eliminate bubbles. After completion, SPR569/SPR569A sealer can be applied for dust-proof treatment.
Applicable places: suitable for hospitals, food factories, pharmaceutical factories, precision electronics factories, etc.
The above are the common forms of the floor in purification workshops. For more information, please consult Hunan Chunzhen Purification Engineering!