[if !supportLists]1, [endif] display bonding: such as VHB?GPL, 59 series, thin double-sided adhesive 9473PC, etc., can make a variety of sizes of the screen bonding with excellent shock resistance, waterproofing and drop resistance, which is widely used in a variety of medical equipment.
2, small parts of the shaped structure bonding: recommended the use of 3M single-group low-temperature epoxy series and PUR (curing reactive polyurethane hot melt adhesive). Among them, 3M single-group low-temperature epoxy series 5520 series and 6011 series, respectively, can be in 55-60 degrees Celsius 20-15 minutes curing, to enhance the process flexibility and impact resistance, do not harm the heat-sensitive components; and 3M PUR6316 and 2710P is a polyurethane reactive hot melt adhesive, with the initial bonding speed of the hot melt adhesive and structural adhesive adhesive strength, flexible anti-vibration and shock resistance. Among them, 2710P has heavy workability and excellent aging resistance. 6316 has shorter holding time, better fluidity, higher modulus/rigidity, less deformation, suitable for narrow bezel bonding, and superior waterproof sealing performance.
3, electronic components potting: you can use 3M Industrial Structural Adhesive, can enhance the resistance of the equipment to external shocks and vibrations, while also avoiding parts, lines directly exposed to improve the waterproof and moisture-proof performance of the equipment. More importantly, it encapsulates the part can also be dustproof, confidential, anti-corrosion, temperature resistance.
3M Potting Structural Adhesive has the following characteristics:
1. Suitable for the opening time: from 5 minutes to 2 hours, and even the customer's own heating control of the opening time, elasticity of the opening time to suit the needs of the process
2. Easy to apply: different mobility of the adhesive with the different needs of the process
3. Color variety: transparent, translucent, white, gray to black a variety of adhesive colors to choose from. Gray to black color options
4. flame retardant requirements: 3M industrial adhesives, in line with UL 94 HB to V0
5. years of successful cases and cross-border affirmation: 5G communications, automotive electronics, medical connectors, precision potting of wearable devices, etc. have a wealth of successful cases
4. lightweight parts bonding (membrane switch / Mylar / foam, etc.): 3M? Thin double-sided (pressure-sensitive adhesive tape) solutions can accurately meet the bonding needs of different medical devices and lightweight materials
1. Tape can be quickly assembled
2. Tape can meet the needs of high-temperature treatment
3. More easy to die-cutting options, die-cutting pieces of the size of the shape is more accurate
4. Anti-warping adhesive tape even in the curved surface can also be Tight fit even on curved surfaces
5. 3M Tapes are sold globally, helping international companies with their global division of labor
5. Repeat openings: 3M Mushroom Buckles can be used. 3M Dual Lock Mushroom Buckles are available in three different densities or mesh counts, i.e., they contain approximately 170, 250, or 400 mushroom heads per square inch, respectively. The pressure-sensitive adhesive on one side allows for quick and easy adhesion, just like tape, and quick installation without the use of specialized tools. It can also be easily adjusted and reinstalled. It can be used for POS, instrument accessories, and so on.
The above is the application of 3M tape and adhesive on medical device components! If you want to better understand the products, you can go to the official website of 3M.
These are the applications of 3M tapes and adhesives on medical device components.