Which of the two interfaces of the negative pressure suction bottle is connected to the blood glucose meter?

Which of the two interfaces of the negative pressure suction bottle is connected to the table? The answer is: product introduction of negative pressure suction bottle. Negative pressure aspirator, referred to as suction bottle for short, is mainly used for medical drainage, expectoration, blood discharge and secretion. It uses the working principle of vacuum to generate negative pressure in the cavity, so as to guide the liquid out of the cavity and achieve the purpose of pollution discharge and purification. The negative pressure suction devices of our company are divided into two types: split type (KB6403 and KB6404) and integrated type (KB640 1 and KB6402), and each type is divided into different types according to the material, volume and type of the pressure regulator used. Second, the working principle of negative pressure suction device is composed of voltage regulator, liquid collecting bottle and hose. There are two hose connectors on the liquid collecting bottle, one is connected to the negative pressure end and the other is connected to the working chamber. When the negative pressure terminal is connected, negative air pressure will be generated in the liquid collection bottle to guide dirt (such as dirty blood and phlegm). ) flows into the liquid collection bottle from the other hose. When the height of the liquid in the liquid collecting bottle reaches a certain height, the stop valve on the liquid collecting bottle cap will start to work to cut off the liquid inflow pipeline, thus preventing the liquid in the liquid collecting bottle from overflowing due to interference. Considering the different drainage volumes, multiple liquid collection bottles can be cascaded to realize the extraction and storage of a large amount of liquid. Three. Product classification n The pressure regulators of split negative pressure suction devices (KB6403 and KB6404) are separated from the liquid collecting bottle and connected by hoses. The gas terminal plug is connected with the voltage regulator. N integrated negative pressure suction devices (KB640 1 and KB6402 models) are integrated with the pressure regulator, and the gas end plug is integrated with the pressure regulator. Four. Technical parameters of the liquid collecting bottle: pressure-resistant transparent polyester plastic is used, and the volume is 1.2L, 1L, 2L. N pressure regulator: pressure adjustment range: 0-200mmhg n working pressure: 0-0.075 MPa n flow rate: 0-30l/min (adjustable).