Prompt Message:
E63054::
Duplicate authentication message.
Solution:
When this error occurs,
you should consider that it may be caused by the inconsistency between the main
-
standby server authentication and the server to which the bookkeeping message is sent, and you should pay attention to
view and check the configuration of the access switch regarding the configuration of the
radius
service. item in the access switch configuration for the
radius
service to see if any inconsistencies occur.
How to handle this:
1
,
Reboot the access switch.
2
,
Change the authentication and bookkeeping server operation status of the access switch.
Prompt Message
IP
Address conflicts with other systems on the network, connection is interrupted
Solution: Please bring your campus card or student ID card to the Card Center in the Science and Technology Building
3
Floor to report the problem.
Prompt Message
MAC
Address Binding Check Failed
Solution: Please bring your campus card or student ID card to the Card Center in the Science and Technology Building
3
Floor to unbind the
MAC
address.
Prompt message
:User password is wrong, blacklisted
Solution: Please bring your campus card or student ID card to the Card Center in the Science and Technology Building
3
Floor to change your password.
Prompt message
: Your network card has been disabled or the network cable is not plugged in properly, which may affect your use of the network
Solution:
a)
Check whether the local connection is disabled, and if disabled change it to enabled
b)
Check the line connection, whether the network cable is plugged in properly
c)
Replace the wall port, replace the cable
d)
Check your own switch, replace the port, reboot, or connect directly with the wall port
e)
Check that the NIC is installed correctly, and check that the driver is working.
f
)
iNode
Client
-
>>Properties
-
>>Select the correct NIC.
Prompt message
: Failed to check static
IP
address binding
Solution:
a)
Check that the
IP
address is correctly configured in the local connection (see question
9
for configuration).
b
b)
If the
IP
address is configured correctly, uninstall the network adapter driver, restart the computer and reconfigure the
IP
address. Uninstall the network adapter method:
Xp
System: Desktop My Computer
Right-click→Properties→Hardware→Device Manager→Network Adapters→Find the same network card as the local connection
(as shown in Figure
4
)Right-click→Uninstall Driver
Win7
System: Desktop computer
Right-click → Properties → (left) Device Manager → Network Adapters → Find the same network card as the local
connection right-click → Uninstall the driver
If you can not solve the problem to go to the Internet to give specific information to search for, but also can be searched
.