A complete coating production line consists of several parts?

The seven components of a coating line mainly include: pretreatment equipment, powder spraying system, paint spraying equipment, oven, heat source system, electric control system, and suspension conveyor chain. \x0d\ pre-treatment equipment \x0d\\ spray multi-station pre-treatment unit is a commonly used equipment for surface treatment, the principle of which is to use mechanical flushing to accelerate the chemical reaction to complete the process of degreasing, phosphating, washing and other processes. Typical processes of spray pretreatment for steel parts are: pre-greasing, degreasing, water washing, water washing, surface conditioning, phosphating, water washing, water washing, water washing, pure water washing. Pre-treatment can also use shot blasting cleaning machine, suitable for simple structure, serious corrosion, no oil or less oil steel parts. And no water pollution. \x0d\ Powder Spraying System \x0d\ Powder spraying in the small cyclone + cartridge recovery device is more advanced, faster color change powder recovery device. The key parts of the powder spraying system is recommended to use imported products, powder spraying room, electro-mechanical elevator and other components are all localized. \x0d\\ Paint spraying equipment \x0d\ such as oil spray booth, water curtain spray booth, widely used in bicycles, automobile steel plate springs, large loaders surface coating. \x0d\ Baking Oven \x0d\ Baking oven is one of the important equipments in the coating production line, its temperature uniformity is an important index to ensure the quality of coating. Oven heating methods are: radiation, hot air circulation and radiation + hot air circulation, etc., according to the production program can be divided into a single room and through the type, etc., the form of equipment has a straight-through and bridge type. Hot air circulation oven heat preservation, furnace temperature uniformity, heat loss, the test, the temperature difference between the furnace is less than ± 3oC, to achieve the performance indicators of similar products in advanced countries.