Specific installation methods are as follows:
1, the overall description: intel's original radiator is very good to install, you only need to put the radiator's four white buckle aligned with the motherboard CPU periphery of the four radiator mounting holes can be installed.
2. Note: Before installation, be sure to find the location of the CPU fan socket, and then try to select the direction of the radiator 4-pin plug and fan socket location closer to the fixed radiator.
3. First, wrench the fan's foot pegs in the opposite direction of the arrow.
4, align the figure four holes, press down hard, must be hard oh.
5, when disassembling, as shown in the figure below the direction of the arrow to wrench out.
6, the last step is to plug the CPU four-pin fan plug on the motherboard, pay attention to be inserted in the CPU-FAN interface, four-pin is to support PWM speed control, that is, in the bios can be turned on in the CPU fan temperature control, and then to adjust the speed of the radiator fan in the way of PWM.
The remaining PWR-FAN and CHA-FAN can be used to plug in the fans on the case. Take another look at the wires to see if they are blocking the fan blades If this might happen Use a tie wrap to secure the extra wires.