With the innovation of science and technology, there are more and more vacuum pump products on the market. So what are the vacuum pump models? Today we will take a look at the relevant introduction of vacuum pump models through the following content.
Water ring vacuum pump model 2SK water ring vacuum pump: 2SK series water ring vacuum pump is equivalent to two SK series water ring vacuum pumps used in series. Because the SK series water ring vacuum pump can only reach the ultimate vacuum degree of -700mmHg, in order to achieve higher vacuum and larger pumping rate under high vacuum, the 2SK series vacuum pump was developed domestically in the 1980s.
SK type direct-coupled water ring vacuum pump model: SK-type direct-coupled water ring vacuum pump includes four specifications: SK-0.4, SK-0.8, SK-1.0, and SK-1.5B. Used to suck air and other non-corrosive, water-insoluble, solid particle-free gases to create a vacuum in a closed container. A small amount of liquid is allowed to be mixed with the inhaled gas.
SK type water ring vacuum pump model of water ring vacuum pump: SK type water ring vacuum pump and compressor are used to pump or pressurize air and other non-corrosive, insoluble in water, and do not contain solid particles. Gas to form vacuum and pressure in a closed container to meet process flow requirements. A small amount of liquid is allowed to be mixed with the gas that is sucked or pressured.
Water ring vacuum pump model 2BE water ring vacuum pump: 2BE water ring vacuum pump and compressor are developed by our company on the basis of many years of scientific research results and production experience, combined with the advanced technology of similar international products. The high-efficiency and energy-saving products are usually used to pump gases that do not contain solid particles, are insoluble in water, and are non-corrosive to create vacuum and pressure in closed containers.
Water ring vacuum pump model 2BA water ring vacuum pump: 2BA water ring vacuum pump is suitable for extracting gas and water vapor, and the suction pressure can reach 33mbar absolute pressure. When the liquid ring vacuum pump operates for a long time when the suction pressure is close to the ultimate vacuum, a cavitation protection pipe should be connected to protect the pump and eliminate cavitation sound.