In order to ensure that the activities are carried out smoothly, you will usually be asked to make a program of activities in advance, which is a written plan for the specific activities to be carried out. So what kind of activity program is good? The following is my compilation of the program on the summer cooling comfort activities (selected 5), welcome to share.
The program of summer cooling activities 1The advent of summer, the weather station repeatedly issued yellow high temperature warning signals, the maximum temperature greater than or equal to 35 degrees Celsius is defined as "high temperature day", more than five consecutive days of "high temperature days" called "Continuous high temperature". In order to protect the health of workers, and constantly improve labor conditions, improve labor productivity, the company to take practical and effective measures to prevent the heat of the plant cooling work.
A health care measures
1, the supply of cool drinks work, the high temperature and open-air work workers, should guarantee the supply of sufficient cool drinks in line with health standards.
2, to strictly implement the working hours system, rationalize the arrangement of work and rest time, to ensure that the high temperature operation workers have enough rest time, strict control of overtime.
3, do a good job of preventing heatstroke drugs and heatstroke first aid preparations, regular in-depth workshop tour.
Second, technical measures
1, high temperature workshop heat prevention and cooling, should be the first to use the natural ventilation, hot location of the single span and double span workshop, should try to use the natural ventilation mainly through the wind.
2, the workshop has been installed axial flow blower to take the form of convection flow wind reasonable re-installation, effectively reducing the heat cycle within the workshop.
3, part of the window for the transformation, rational allocation of raw paper and finished paper placement, so that the entire workshop has sufficient air circulation.
4, in order to reduce the solar radiation heat into the workshop, can be considered in the workshop around the iron canopy, insulation, ventilation roof installed water spray, spray device, effectively reduce the temperature of the direct sunlight outside, the better to make the hot air in the workshop to the outside.
5. Strict monitoring of high-temperature equipment to prevent damage to the machine parts caused by steam leakage, which affects the workshop temperature rise.
Three, organizational measures
1, in the hot season in order to ensure that workers have enough rest, as much as possible to streamline the meeting, to have to work, avoid overtime, overtime.
2, in the summer season should be based on the production process, as far as possible to adjust the labor organization, take the method of shift work, shorten the time of a continuous operation, and strengthen the work of the rotation rest.
3, the workers should strengthen the publicity and education of heatstroke prevention and first aid.
The program of the summer cooling comfort activities 2I. The purpose and requirements of the exercise.
In order to implement the occupational health and safety management system standards, to deal with potential heat stroke prevention and cooling accident hazards, to ensure the personal safety of the workers, to clarify the emergency rescue procedures, to ensure that the first aid plan in an orderly manner, especially the preparation of the plan.
Second, the preparation of the basis.
1, "Chinese People's **** and State Safety Production Law".
2, "Regulations on the Safe Management of Dangerous Chemicals".
3, "production and management unit safety production accident emergency plan preparation guidelines"
Third, the drill time, location, and participants in the drill.
1, drill time: xx, xx, xx, 20xx, 13:00 - 13:30.
2, drill location: production department xx cross-cutting unit operation side 1 # stacking peripheral area.
3, to participate in the exercise personnel: exercise leadership group, A operation area, warehouse A class, turning package group.
4. Exercise leadership team.
1, leader: xx.
2, deputy leader: xx (command), xx (organization), xx (organization).
3, planning:
4, group members:
V. Rescue equipment and materials:
First aid kit (medical alcohol, Rendan, ten drops of water, patchouli, bandages, disinfectant), communication tools, towels, mineral water, electric fans.
Six, the exercise process:
1, cross-cutting employee xx in the 1 # stacking operation, heatstroke collapsed on the ground (simulation of the accident), the shift leader xx found, notify the shift operations chief xx.
2, operations chief xx received the accident report, immediately reported to the exercise leading group, while starting the emergency plan, organizing the The emergency plan was activated at the same time to organize on-site salvage.
3, xx: in the rescue at the same time to isolate the scene protection, evacuation of unrelated personnel, protection of the accident scene.
7, first aid steps:
1, moving: the operation chief xx organization site personnel will heat stroke employees xx quickly lifted to the ventilation, cool, cool place, make it lying down, head elevated, and unbuttoned, loosen the belt, cuffs.
2, cooling: the patient's head covered with a wet towel, with cold water bath, to accelerate heat dissipation, but can not be directly to the patient blowing, to prevent the cause of cold.
3, hydration: if the heat stroke patients awake, no nausea, vomiting, can drink salt water, play a role in cooling, replenish blood volume. When replenishing water, do not rush to replenish a large amount of water to avoid causing vomiting, abdominal pain, nausea and other symptoms.
4, to promote wakefulness: If the patient has lost consciousness, you can finger pinch the middle of the man, Hegu and other points, so that it wakes up. If breathing stops, artificial respiration should be implemented immediately.
5, transfer: for severe heatstroke patients, must be sent to the doctor in time. Transportation should be as physical as possible on the way to protect the brain, heart and lungs and other important organs. You can use a cold compress on the head, or use a medical alcohol bath until the skin is red.
6, emergency rescue after heat stroke employees slowly awakened.
7, the operation chief Yan Wei confirmed to the exercise leadership team to report the completion of the heat stroke emergency plan site exercise.
Eight, the exercise leadership team summarized the exercise and announced the end of the exercise.
IX, the exercise personnel to withdraw from the exercise site, the unit to resume operations.
X. Summarize the problems in the exercise and make plans for improvement.
The program of the summer cooling comfort activities 3As the weather gradually turned hot, the sustained high temperature and hot weather on the front line of production staff physiological and psychological health have a great impact, especially easy to make people physically and mentally fatigue, thus increasing the probability of accidents. Coupled with the greater labor intensity of the production line, personnel turnover is serious, but also to prevent heat stroke put forward higher requirements. Therefore, we must maximize the relief of the impact of the heat and high temperature on the front-line production staff to reduce the incidence of summer accidents.
Combined with the actual situation of the production line, in order to reduce the incidence of accidents, reduce the rate of staff turnover, specially formulated the following summer cooling program:
A daily diet:
(a) It is recommended that the cafeteria meals to light, nutritious, easy to digest, and more to prepare a number of cool and refreshing food, such as cold noodles, cold vegetables, cold noodles, and so on.
(b) the hot weather will increase the staff's physical energy consumption, therefore, it is recommended that the cafeteria moderate increase in ginger, vinegar, bitter melon, garlic and other products to wake up the spleen and stomach, and reduce the amount of oily and spicy food in the meal to enhance the staff's appetite;
(c) each meal as much as possible to provide a cool and invigorating drinks, such as tomato soup, mung bean soup, etc., and recommended seaweed and pumpkin soup;
(d) the preparation of meals to light, nutritious, easy to digest, more prepared some cool and refreshing foods, such as noodles, cold vegetables, cold noodles, etc.;
( (D) In the preparation of meals, prepare more fresh and juicy `foods, such as cucumber, tomato, bean curd, bitter gourd and so on.
Second, high-temperature welfare:
(a) Regularly provide watermelon, tomatoes and other cold fruits for the front-line production staff to ease the pressure of high temperature.
(ii) purchased Pueraria lobata, honeysuckle, green beans and other items, every day regularly provide chrysanthemum tea, green bean soup, light salt water and other fire drinks, be sure to ensure that the production line drinking water supply.
Three preventive measures:
(a) work can be arranged according to the weather conditions of the front-line production staff to rest moderately;
(b) to strengthen the management of the staff dormitory, do a good job of dormitory ventilation, improve dormitory sanitation, disinfection and anti-mosquito on a regular basis, and to do a good job of comprehensive management of environmental health;
(c) (C) pay close attention to canteen hygiene, strict implementation of the disinfection system, improve canteen food hygiene, to prevent food poisoning;
(D) prepare some commonly used summer cooling medicines, such as: Rendan, Huo Xiang Zhengqi Shui, ten drops of water, anemone, etc., placed in the warehouse by the director of the workshop according to the needs of the pick up.
(e) and the local hospital to establish a medical care agreement, as a medical care guarantee; the company reserved drivers on standby, in order to deal with accidents due to the heat of the weather in a timely manner;
Fourth, do a good job of staff thinking:
(a) production of summer heat posters in the company's various places to post, on the prevention of summer heat work Publicity, plans to produce posters, banners, printing A4 paper posted in the workshop, dormitory and other parts of the plant, the estimated cost of 200 yuan;
(b) It is recommended to invite the company's leadership for the evening staff workshop, dormitory visits;
(c) Employees in the work period, the director of the workshop and the team leader to do a good job of guiding the thinking of the work of the employee relations commissioner to understand the ideas of the staff on a regular basis, grasp the Employee relations specialists should regularly understand the ideas of employees, grasp the dynamics of employee thinking, and do a good job of dormitory visits.
The program of summer cooling activities 4To implement the "Work Safety Law", "Prevention and Control of Occupational Diseases Law" and other laws and regulations, and effectively do a good job in the summer of 20xx to prevent heat stroke, effective prevention and control of the Department of the incident, and effectively protect the health and safety of workers, according to the "Anhui Provincial Safety Supervision and Regulation Bureau of the summer of 20xx on the work of summer heat stroke notification" (Anhui Ansuan Jian letter) 20xx96), "Huangshan City Safety Production Supervision Bureau on doing a good job in 20xx summer heat stroke prevention work notice" (Huang An Supervision Jian letter 20xx93) the spirit of the document, combined with the actuality of my district, put forward the following requirements:
First, attach great importance to strengthening the organizational leadership
Prevention of summer heat stroke work directly related to The company has a lot of people who are interested in the company's products and services. In recent years, due to the summer hot weather caused by heat stroke or even death occurred, to the workers' health and life safety caused serious damage. All local departments should fully understand the summer heat stroke on the health hazards of workers, and effectively put the work of heat stroke prevention and cooling on the important agenda, strengthen the organizational leadership, the implementation of the work of responsibility, thorough and detailed deployment of heat stroke prevention and cooling work. To supervise and guide the employer to implement the responsibility and measures to prevent heat stroke, and will be compacted to the workshop, class combination of workers, to prevent high temperature operation caused by heat stroke events and production safety accidents.
Two, multi-pronged, the implementation of the main responsibility
Employers are the responsibility of the main body to do a good job of preventing heatstroke work, must take effective measures to strengthen the high temperature work to prevent heatstroke work, and prevent heatstroke events. To combine the operating characteristics of the unit and the weather forecast information released by the meteorological department, reasonable arrangements for the working hours of workers in hot weather, appropriate adjustments to the summer high-temperature work labor and rest system, strict compliance with the requirements of high-temperature working hours. Before the arrival of hot weather, the organization of high-temperature operation workers to carry out occupational health checks, the physical condition is not suitable for high-temperature operation of the workers, should be promptly adjusted to the operating position. To increase the investment of funds to prevent heatstroke, equipped with the necessary ventilation or cooling equipment, to provide workers with personal protective equipment needed to prevent heatstroke, cool drinks and other commonly used items, through the improvement of working conditions and operating environment, to protect the life and health of workers.
Three, highlight the focus, strengthen supervision and law enforcement
Each local department of the relevant units in the organization of the summer production safety and occupational health inspection, the work of heat stroke prevention as an important part of the inspection. Industry authorities should strengthen the industry to prevent heatstroke work inspection. They will focus on checking whether employers have established a sound system for preventing heatstroke and cooling, whether they have organized occupational health checks for workers, whether they are equipped with ventilation or cooling equipment to improve working conditions, whether they have reasonably arranged or adjusted work and rest time in high temperatures, and whether they have formulated an emergency plan for heatstroke. In accordance with the requirements of the "four not two straight", to carry out unannounced inspections and visits to prevent heatstroke, highlighting the easy occurrence of heatstroke events industry (field) and key units, and increase the construction sites, open-air workplaces, transportation vehicles, the existence of high-temperature jobs employer supervision and inspection. The implementation of measures to prevent heat stroke is not in place, to be seriously investigated and dealt with and be publicly exposed. Violation of the relevant provisions of the state, endangering the health of workers, in accordance with the law and strict investigation, ordered the employer to timely rectification, and strengthen the implementation of rectification of the tracking and inspection, to ensure that the rectification measures in place.
Four, strengthen the publicity, create a good atmosphere
Each local department of the relevant units should be fully integrated with the "safety month" activities, through the television, network, microblogging, microblogging and other media, vigorously publicize the importance of doing a good job of preventing heat stroke, popularize The basic knowledge of heatstroke prevention and cooling, enhance self-rescue and mutual rescue capabilities, so that the person in charge of the employer and the majority of workers to understand the hazards of high temperature and the importance of heatstroke prevention and cooling work, to create an atmosphere of public opinion that the whole society cares about the health and safety of the workers, and to enhance the awareness of the safety of the laborers of high-temperature work and compliance with the rules and regulations of the conscientiousness of the control of high-temperature heatstroke events, to prevent the occurrence of accidents of production and safety.
The program of the summer cooling comfort activities 5A project overview
Xingmao - leisurely South Mountain a high-level (1 #, 2 #, 3 # building) for the investment of Anhui Xingmao Real Estate Company Limited construction, Chongqing Jian'an Construction (Group) Co. The main body of the project has been completed, now indoor and outdoor plastering and decorative decoration process, in order to clarify the workflow and management of heatstroke prevention, prevention of heatstroke and other accidents caused by high temperature, to ensure the health and safety of employees, to ensure that the construction activities of the project is safe and smooth, and to do a good job of disposing of hidden dangers in a timely manner in case of a safety accident to minimize the loss of accidents, according to the "Chinese People's * * * and the State Safety Production Law". ** and State Safety Production Law", "Construction Project Safety Production Management Regulations", specially formulated for this project high temperature heat prevention construction program.
Second, the preparation of the basis
GB4200-20xx "high-temperature operation classification"
GBZ/T189.7-20xx "workplace physical factor measurement Part 7: high temperature"
GBZ1-20xx "industrial enterprise design health standards"
p> GBZ2.2-20xx "Workplace Hazardous Factors Occupational Exposure Limits Part 2 Physical Factors" Anhui Province Meteorological Disaster Early Warning Signals and Defense Guidelines for the relevant management procedures of this enterprise
Third, the scope of the preparation
This program applies to the first phase of the high-rise Xingmao - Yuran Nanshan (1 #, 2 #, 3 # building) project The summer summer cooling prevention work in 20xx.
Fourth, the management organization and division of responsibilities
Heat stroke prevention and cooling working group: slightly
Fifth, high-temperature work classification:
According to the workplace WBGT index and exposure to high-temperature work time high-temperature work is divided into four levels, the higher the level of heat intensity. The higher the level, the greater the heat intensity. See Table 1:
Note: The WBGT index, also known as the wet bulb black bulb temperature, is a basic parameter for comprehensively evaluating the heat load on the human body exposed to the work environment, and is measured in °C.
According to the WBGT index, the human body is exposed to the heat load of the work environment.
According to Table 1 grading content, all the contents of the site work graded to identify the high temperature work groups, and the development of the corresponding measures to prevent heat stroke, see Exhibit 2.
Six, high temperature heatstroke prevention program:
1, heat stroke prevention work start
p> (1) heat stroke prevention work start instructions:
When the project entered the hot season, the project archivist is responsible for collecting and checking the temperature changes, when the temperature reaches a maximum of 32 degrees Celsius, timely inform the project full-time safety officer, project manager, to remind the project manager to start the work of heat stroke prevention.
(2) summer cooling work plan preparation:
summer cooling work plan by the project safety officer is responsible for the implementation of the views of the project technical officer, production manager should be involved in the revision of which, the summer cooling work on the additional improvement proposals, the work plan by the project manager after the final confirmation of the implementation of the work plan.
(3) heat stroke prevention and cooling work closure instructions:
When the fall after sunny day outdoor air temperature continuous monitoring is less than 32 degrees, the project archivist can be inquired to the weather station to find out whether the high temperature season is over. And feedback to the project full-time safety officer, the project manager, to remind the project manager to issue the end of the summer cooling instructions.
2, the collection and release of meteorological information
(1) Collection:
The project archivist is responsible for regularly receiving the meteorological real information data in Lu'an City, Anhui Province, and tracking the weather station about the day's open-air temperature news, and forwarded to the project manager and the person in charge of safety.
(2) Release:
The project archivist releases the collected meteorological news to the members of the project department and the construction unit through the network communication group in time every day.
The production manager is responsible for the weekly engineering coordination meeting at the same time to set up the construction content at the same time to set up the arrangement of summer cooling.
3, the basic requirements of measures to prevent heatstroke cooling
(1) work and rest time adjustment: reasonable adjustment of the work and rest time of the construction site, the construction team employees to work in the morning changed to 6:00 from the living area, the end of the day at 11:00, 16:00 p.m. to start work, the end of the day at 18:00, so that you can avoid high-temperature open-air work, and ensure that employees have sufficient lunch breaks.
(2) construction site measures to prevent heat stroke:
A, open-air work sites: outdoor works and other open-air work must be staggered in the hot weather or to take measures to prevent sunshine, to prevent secondary accidents due to high temperature operations.
B, aerial work: when encountering unavoidable aerial work, the person in charge of the operating team must apply to the project department full-time safety officer, the project department to determine the day's operating time, aiming to avoid the high temperature of midday moments of construction. At the same time to ensure that the sun protection measures, labor protection measures in place before construction. A single operator shall not work for more than one hour at a time, and the team leader shall be the person responsible for the operation task of the day, check the status of the operator once every half an hour and report to the project department for record.
C, contact with high-temperature work points: such as roof tile construction, exterior wall insulation, exterior frame removal operations, railing installation, exterior window installation, must be set up to monitor, while the person in charge of the construction must be a high-temperature work point patrol every hour, check the status of the operating personnel, and timely arrangements for personnel rest.
D, all kinds of operation shed: each team leader for the operation of the shed belongs to the person responsible for the prevention of summer heat, must be hourly patrol, check the state of the operating personnel, reasonable arrangements for personnel rest.
E, not back to the living area at noon employees: not back to the living area at noon personnel arranged in the designated location or temporary rest point to rest, prohibit the arrangement of exposure in the open air.
(3) construction site rest point set up and drinking water arrangements: the site set up two rest points, one in the labor office, the other in the project meeting room, are configured with drinking water points.
(4) heatstroke medication distribution:
Construction site set up a heatstroke distribution point: the site depot is equipped with heatstroke herbal tea tea, heatstroke emergency medication at any time for the need to issue personnel.
Heatstroke medication
(5) daily inspection system for heatstroke prevention and cooling: the project must be carried out during the high temperature heatstroke prevention and cooling inspection of high-temperature workplaces, the inspection includes:
1, the implementation of heatstroke prevention and cooling measures;
2, high-temperature work personnel's mental state;
3, the construction unit of the emergency preparedness for heatstroke. . Nonconformity found during the inspection must be corrected in a timely manner, and construction is prohibited in the absence of rectification.
4, emergency response and training
(1) Emergency measures:
Establishment of emergency information boards, emergency alarm process.
(2) training and education:
Each construction team should be implemented during the daily morning shift meeting to carry out heat stroke prevention and cooling measures for the content of each high-temperature point of operation, to ensure that the construction staff to master the knowledge of high-temperature point of operation to prevent heat stroke. The project should be organized at least once during the hot season to prevent heatstroke special training activities to ensure that the construction unit to master the requirements of heatstroke and heatstroke first aid knowledge.
5, lunchtime overtime declaration:
Noon 11:00 to 16:00 period if you need to work overtime in the construction site, you must apply in advance, the project full-time safety officer approval reported to the project manager agreed to before implementation. The application form for overtime work at noon is attached as Schedule 3.
6. Other: In case of heatstroke, the emergency will be carried out in accordance with the project's Emergency Response Handbook. .