Shock Xiong injection molding machine maintenance department parts supply, injection molding machine nozzle flange, barrel screw, special decoder, injection rubber piston rod, size hinge edge, steel bushings, copper bushings, lubrication pumps, variable pumps, heating rings, temperature sensing wire, heating contactor, electronic boards, displays, computers and so on
Shock Xiong injection molding machine collection of the Chen Xiong The combination of Chennai's mature experience in making energy-saving injection molding machines and the use of high-efficiency, high-quality servo motor oil pump systems realizes the advantages of energy conservation, high response speed, high repeatability, reliability, durability, and serenity, and meets the national level energy-saving standards.
Chen De's injection molding machines are driven by highly efficient and powerful servo motors, so that the output of the injection molding machine's hydraulic system corresponds to the power required for the machine's operation, and there is no high-pressure throttling or overflow energy loss, which saves up to 80% of the power compared to traditional hydraulic systems, and further enhances the power-saving effect when paired with the electromagnetic heating coil.
Because the machine avoids generating unnecessary heat energy, the machine cooling water consumption can be reduced by 70% - 80%, and effectively reduce the oil temperature rise, reduce the number of oil changes, extend the service life of hydraulic oil and hydraulic system accessories, greatly saving the investment in equipment.
The mold clamping part of Chen De's injection molding machine is specially designed with hard chrome plating on the surface of the guide columns and increased diameters to ensure durability and durability, and a centralized electric quantitative lubrication system is specially set up to minimize wear and tear; the templates and hinges are made of high-strength spheroidal graphite castings to ensure that the templates are not easily deformed; the clamping speeds and pressures of the clamps can be controlled by setting multiple segments and high pressure clamping position can be set automatically; the vibratory ejector and ejector speeds and pressures can be adjusted. The speed and pressure of vibration ejector and pin back can be adjusted, when using vibration ejector, no need to push the pin back to the end of the ejector to eject the action again, saving the cycle time.
Glue injection part can be set to five levels of glue injection speed and glue injection capacity control, 99-steps variable speed high torque hydraulic motor temperature control accuracy of up to ± 1 ℃; also equipped with a screw anti-cold start device, with low temperature alarm, to prevent damage to the screw when the temperature of the glue is not enough to prevent leakage of glue, and also equipped with a reverse cable device.
Chen De's injection molding machines are also equipped with a high-performance precision oil filtration device. Under normal continuous operation of the device, the oil contamination level can reach the U.S. Nnas 8 standard (i.e., it is even cleaner than new hydraulic oil), which reduces the burden on the hydraulic system, reduces maintenance, and prolongs the service life of the hydraulic system; and the overall low-noise operation of the machine ensures that the environment of the production plant is quiet.
The clamping force of this series of injection molding machines are 80, 120, 150, 180, 220, 260, 320, 400, 480, 560 tons.