In life, the guarantee letter is more and more close to us, the guarantee letter should be written in a practical and specific way, and it should be realistic and true, and it should be said and done, and it should not be overstated. A reference to the guarantee is how to write it, the following is my collection of safety guarantee 9, welcome to share.
Security Guarantee Part 1Hotel Security Security Responsibility Commitment: The Security Department is the security part of the hotel, is responsible for the hotel's safety and security functions. Security Department employees are mainly responsible for the hotel's safety and security work, to maintain the hotel's internal security order, to protect the hotel and its staff property and personal safety. The hotel's security work, with the fate of the hotel is closely related, therefore, in order to clarify the responsibility of the security department staff, especially the development of this fire safety responsibility.
1, seriously do a good job of handing over **** records, and do a good job of handing over **** procedures . Otherwise, all responsible accidents occurring, are the responsibility of the two classes of employees and some of the relevant persons in charge.
2, strict goods out of the entry and release procedures. If the gate post, monitoring post is not strict gatekeeper caused by the loss of goods, the loss of goods by the Ministry of Finance to assess the value of the gate post, monitoring post security guards and some of the relevant person in charge of the responsibility to pay compensation.
3, overnight guests vehicles, due to the security guards did not seriously fulfill the "car park vehicle number reading table" and did not seriously inspect the vehicles caused by theft or man-made damage, the responsibility of the duty security and part of the relevant responsible person.
4, stick to their posts, do not leave their posts privately, tampering with the post, frequent inspections, check the area of responsibility, and timely detection of potential insecurity. If due to the private leave the post, tampering with the post and inspect the area of responsibility is not serious, incomplete and the occurrence of robbery, theft, fire, etc., all the responsibility by the duty of the post of security guards and the person in charge of the relevant responsibility.
5, the fire control center security guards should check the normal operation of the hotel fire equipment every day. Found that the normal operation or abnormal fire facilities, equipment should be promptly reported in writing to the person in charge of the section.
6, inspection security guards, if not in accordance with the provisions of the hotel carefully and completely inspected, not in accordance with the provisions of the inspection and theft, murder, fire and other accidents, inspection security guards are responsible for negligence.
7, the hotel theft or fire, the security guard received the alarm and did not arrive at the scene in time, resulting in the expansion of the accident situation, the security guard on duty, the security guard and the person in charge of the accident is responsible for.
8, the person in charge of the security department to develop the hotel long, short-term fire, safety training system, the development of the hotel long, short-term fire, safety inspection system, if not developed due to the above system caused by security accidents, part of the person in charge of the main responsibility.
9, part of the person in charge of the hotel each new employee fire safety training, is strictly prohibited to train the staff of the failure to work. 10, part of the person in charge of the general manager instigated by the monitoring of the parts of the "deadline for rectification notice" of the implementation of the results of rectification to report to the general manager in a timely manner, and by the general manager instigated by the hidden parts and parts of the corrective action.
11, part of the person in charge should be in accordance with the rules and regulations of the hotel strict requirements, standardize the security department staff. Du exhaust unorganized, undisciplined situation.
12, the security department staff to maintain the interests of the hotel and physical injury, the hotel is responsible for all related medical expenses until the body to recover and normal work until. Disability or death is dealt with in accordance with national regulations.
13, part of the person in charge of fire safety for the part of the person responsible for fire safety, fire safety is mainly responsible for.
15, if the scope of responsibility within a year without liability accidents, the hotel will be based on the actual situation to give awards.
16, this statement of responsibility in duplicate, with legal effect.
Safety Guarantee Part 2Taicang City, Science and Education new city construction project site civilized construction
Safety production target pre-control management responsibility
In order to implement the "safety first, prevention first" approach to safety production, according to the "Construction Law," "Production Safety Law," "Construction Safety Management Regulations" and "Suzhou City," the "Safety Management Regulations" and "Construction Safety Management Regulations" and "Construction Safety Management Regulations" and the "Safety Management Regulations" and "Safety Management Regulations. Ensure that the following personnel are in place, and each assume responsibility for the safety of the construction of this project.
1, the construction unit on-site representative: Tel:
2, the project manager: Certificate No.: Tel:
3, safety personnel: Certificate No.: Tel:
4, the superintendent of engineers: Certificate No.: Tel:
Second, the construction unit's responsibility for the safety of the construction unit
1, in accordance with the relevant provisions of the state and the contract Agreed to the construction unit to allocate construction safety protection, civilized construction measures.
2, to the pre-construction unit to provide the construction site and adjacent areas of underground pipeline information, meteorological and hydrological observation data, adjacent buildings and structures, underground works and other relevant information.
3, shall not be survey, design, construction, engineering supervision and other units do not comply with the construction safety laws, regulations and mandatory standards, and do not compress the contractual duration.
4, shall not express or imply that the construction unit to buy, rent, use safety protection equipment, machinery and equipment, construction machinery and accessories, fire facilities and equipment do not meet the requirements of safe construction.
5, is responsible for taking the lead in organizing the signing of the construction project construction safety responsibility guarantee and two or more construction units in the same operating area for construction operations between the two sides of the production safety management agreement.
Third, the construction unit's safety responsibilities
1, the construction unit's project manager is responsible for the safety of construction projects, strict compliance with JGJ59 - 99 standards and relevant norms. The implementation of production safety responsibility system, production safety regulations and operating procedures, to ensure the effective use of production safety costs, and according to the characteristics of the project to organize the development of safe construction measures to eliminate hidden safety accidents, timely and truthful reporting of production safety accidents. Before the 30th of each month, fill out the site hidden danger investigation report and submit it to the Planning and Construction Bureau of the Administrative Committee of Science and Education New Town.
2, the construction unit in accordance with the provisions of the project to set up a safety management organization, equipped with full-time production safety management personnel, and effectively carry out its project construction safety supervision and management responsibilities, remember the site "safety diary".
3, the construction unit to be included in the construction project budget estimates of the safe working environment and safety construction measures required for the construction of safety equipment and facilities for the procurement and renewal of safety construction measures, the implementation of safety production conditions for the improvement of, and shall not be diverted to other purposes.
4, the construction project to implement the construction of general contracting, by the general contractor of the construction site safety production is responsible for the overall responsibility. General
The contracting unit according to law will be subcontracted to other units of construction, subcontracting should be clear in their respective rights and obligations in terms of production safety. The general contractor and subcontracting unit of the subcontracted works of production safety bear joint and several responsibility. Subcontracting unit should be subject to the general contractor's production safety management, subcontracting unit does not obey the management of production safety accidents caused by the subcontracting unit to bear the main responsibility.
5, the construction unit to do a good job of "three-level education" and pre-job training, so that the first education after work; special operators must be in accordance with the relevant provisions of the state after special training in safety operations, and obtain a special operation qualification certificate before going to work.
6, the establishment of major sources of risk of registration, publicity and monitoring system. Construction units should be in the construction design of the preparation of safety measures and construction site temporary power program, the template project, lifting and hoisting works and scaffolding works and other professional, dangerous sub-projects should be prepared for the special construction program, with the results of the safety calculations, by the construction unit of the technical leader, the superintendent of the construction engineers signed the implementation of the full-time safety management personnel to carry out on-site supervision. Major construction hazards of the sub-parts of the project must be organized expert group demonstration review.
7, the construction unit is responsible for project management of technical personnel to the technical requirements of the construction of the relevant safety construction to the construction team, operators, make a detailed description, and signed by both parties to confirm.
8, the construction unit should be at the entrance to the construction site, construction cranes, temporary power facilities, scaffolding, access to the mouth, stairway, elevator shafts, holes, bridges, tunnels, pit edges, blasting materials and harmful and dangerous gases and fluids stored in the dangerous parts of the site, set up a clear safety warning signs. Safety warning signs must comply with national standards.
9, the construction unit should be based on different stages of construction and the surrounding environment and seasonal and climatic changes in the construction site to take appropriate safety construction measures. Construction site is temporarily suspended, the construction unit to do a good job on-site protection.
10, the construction unit will be the construction site of the office, living areas and work areas are set up separately, and maintain a safe distance; office, living area of the site to meet the safety requirements. Employee meals, drinking water, resting places, etc. to meet health standards. Not set up in the building has not been completed staff group quarters.
Temporary construction site buildings should meet the requirements for safe use. Construction site use of assembled mobile homes should have product certification.
11, the construction unit to comply with relevant environmental protection laws and regulations, the construction site to implement closed management, fences, gates strong, beautiful, lintel writing business, project name. Site layout is reasonable, standardized, five cards and a map and a variety of signs are complete, hanging neatly and beautifully. Prevent or reduce dust, exhaust, wastewater, solid waste, noise, vibration
and construction lighting on the human body and the surrounding environment hazards and pollution.
12, the construction unit to establish a fire safety responsibility system at the construction site, to determine the fire safety responsibility, the development of fire, electricity, the use of flammable and explosive materials and other fire safety management system and operating procedures, set up fire escapes, fire fighting water sources, equipped with fire fighting equipment and fire fighting facilities and set up a conspicuous sign at the entrance to the construction site.
13, the construction unit purchasing, leasing safety protection gear, machinery and equipment, construction equipment and accessories, should have a production (manufacturing) license, product certification, and check before entering the construction site.
14, the construction site of the safety equipment, mechanical equipment, construction machinery and accessories must be managed by specialized personnel, regular inspection, repair and maintenance, the establishment of the corresponding data files, and in accordance with relevant state regulations in a timely manner scrapped.
15, construction cranes and overall lifting scaffolding, templates and other self-erecting erection facilities should be registered in accordance with the provisions of the use. Construction lifting machinery and equipment first property rights registration, installation before informing, for the use of registration, dismantling before informing, for the cancellation of the registration
16, the construction unit to be engaged in hazardous operations at the construction site for the accidental injury insurance. Accident insurance premiums paid by the construction unit. The implementation of construction general contracting, the general contractor to pay the accidental injury insurance premiums. Accidental injury insurance period from the date of commencement of construction works to completion and acceptance.
17, strictly prohibit construction workers and project management personnel within the jurisdiction to the sky mirror lake swimming.
Fourth, the safety responsibility of the supervision unit
1, the content of production safety management into the supervision planning, clear safety supervision scope, content, work procedures and institutional measures, as well as staffing plans and responsibilities, etc.; more than a medium-sized project and the "Regulations" Article 26 of the larger sub-projects, the supervision unit should be prepared to supervise the implementation of the rules. Implementing rules should specify the methods of safety supervision, measures and control points, as well as the construction unit of safety and technical measures to check the program.
2, review the total, subcontracting construction company qualifications, safety production license, three types of personnel and special operators to obtain a certificate of safety assessment and operation qualification.
3, review of the general, subcontracted construction companies, safety production security system, safety production responsibility system, rules and regulations and safety supervision agencies to establish and staffing situation.
4, the audit of construction companies emergency rescue and safety protection, civilized construction measures to use the plan.
5, audit the construction site safety protection is in line with the bidding commitment and "construction site environment and health standards" and other standard requirements.
6, review the construction unit construction machinery and overall lifting scaffolding, templates and other self-erecting erection facilities, safety protection gear, various facilities of the safety permit acceptance records, and signed by the safety supervisor for the record.
7, review the construction organization design of the safety and technical measures or special construction program is in line with the mandatory standards for engineering construction.
8, regular inspection tours to check the hazardous engineering operations.
9, in addition to supervising the construction unit to supervise the construction unit for the weekly inspection of the project department, the daily inspection of the team, and the weekly inspection records will be reported to the supervisory unit for the record, should also be required to work together with the construction unit of the construction process of the different construction phases (before the start of construction, the foundation leveling, the main body capping, decorating) of the safety of the production status of the comprehensive safety evaluation, and will be the results of the evaluation on record.
10, project supervision units and supervision engineers should be in accordance with the laws, regulations and mandatory standards for engineering construction to implement supervision, and construction project safety production supervision responsibility.
In the process of project construction, the supervision unit to strengthen the construction site inspection and checking, supervise the construction unit in strict accordance with the review and approval of the mandatory standards of construction in line with the mandatory standards of construction and special construction program in the implementation of safety and technical measures. Found that there are hidden dangers of safety accidents should promptly require the construction unit to rectify the situation is serious 'to immediately require the construction unit to temporarily stop construction, and promptly report to the construction unit, the construction unit refuses to rectify or does not stop the construction of the project supervision unit should promptly report to the relevant competent authorities. Seriously implement the production safety supervision work report system, fill in the construction safety supervision report before the 30th of each month.
Fifth, other units of production safety responsibility
1, mechanical equipment, construction machinery and accessories rental units should provide the relevant manufacturing license, product certification, testing and certification.
2, construction of overweight machinery and the overall lifting scaffolding, templates and other self-erecting erection facilities installation units should provide corporate qualifications, safety construction measures and acceptance and commissioning.
3, construction of cranes and overall lifting scaffolding, templates and other self-erecting erection facilities inspection and testing units should provide corporate qualifications and issue safety certification documents.
Six, the commitment of all parties
1, strict compliance with national laws and regulations on production safety, and conscientiously implement the safety specifications and standards, to assume their respective responsibilities for safety, to fulfill the relevant obligations, to ensure that the project construction safety.
2, truthfully provide relevant information for the record, the industry authorities and other departments of the safety supervision and inspection, to be actively
Safety Guarantee Part 3First, strictly abide by the national, provincial and municipal road traffic management regulations, to comply with the social morality and civilized urban traffic
Transportation, "three to let" provisions, do not scramble, do not run into the road, do not run into the road, do not run into the road. Do not scramble, do not run red lights, do not violate the signs, markings.
Second, strictly abide by the Group's human-vehicle joint inspection, "a book, three certificates and two cards" and "three do not enter the station, five do not leave the station"
and other management regulations, to ensure that the vehicles driven by the brakes, steering, lights are intact, according to the provisions of the hammer, fire extinguisher, fire extinguishers, and so on.
The safety hammer, fire extinguisher, seat belt and engine high temperature automatic fire extinguishing device are equipped according to regulations.
Third, strictly abide by the Ministry of Transportation "long-distance continuous operation of the sleeper bus 2:00 a.m. to 5:00 a.m. temporary parking
rest" regulations; strict implementation of the departure station and on the way to the site of the "three goods" inspection, to eliminate the three goods on board.
Fourth, strictly do: strictly prohibit overcrowding, speeding, fatigue driving, driving with a sick car
on the road, prohibit the mixing of passenger and cargo, prohibit overcrowding passengers, prohibit dangerous goods on board, prohibit driving under the influence of alcohol, prohibit the operation of
Chapter.
V. Remind travelers: correctly wear a seat belt, no smoking in the car, prohibit the carrying of dangerous goods on board.
Six, on time to participate in driver safety meetings and education and training, serious study notes, strict compliance with the set
Group requirements of the safety activities.
VII, to ensure vehicle fire safety, the timely elimination of fire hazards, and effectively achieve the fire hazards early discovery, early
disposal, timely rescue, timely and proper evacuation of passengers.
VIII, safe driving, civilized driving, so that people do not have problems on the car, car problems do not go on the road, to protect the enterprise
safe production.
I promise to do the above points, if there is a violation of the voluntary parking rectification, accept the relevant departments, Transportation Group and
Affiliated units to deal with (including but not limited to notification of criticism, economic compensation, termination of the contract, etc.), and by me to bear
All the losses caused by this.
Vehicle No.
Affiliated unit: (Chapter) Owner:
Driver:
Month, 20xx
1
Safety Guarantee Part 4For the sake of my personal safety and health, and for the sake of stable development of the enterprise, I voluntarily sign and abide by the following commitments in my work:
Safety Responsibility
(1) conscientiously carry out the implementation of national laws and regulations on work safety and various safety management systems at the company and factory levels.
(2) organization to develop workshop safety management regulations, safety technology operating procedures and safety technology measures plan.
(3) Organize workshop safety education for new employees.
(4) Organize group safety activities, listen to and adopt the correct suggestions made by employees in time.
(5) Organize regular safety inspections for all workshop employees to ensure that equipment, safety devices, fire fighting, protective equipment and so on are in perfect condition.
(6) Implementation of the tasks assigned by the Office of the Factory Safety Committee.
(6) Strictly implement the relevant standards for the issuance of labor protection supplies. Strengthen the management of workers' labor protection supplies and protective equipment, and educate workers to keep them properly and use them correctly.
(7) adhere to the principle of "four do not spare", report and deal with accidents in the workshop in a timely manner, pay attention to the protection of the scene, identify the causes and take preventive measures. The person responsible for the accident to put forward treatment, reported to the competent department and the factory director for approval after the implementation.
(8) Organize the safety management network of this workshop, equip qualified safety management personnel, support the work of the workshop safety officer, and give full play to the role of shift safety officer.
Production safety target in 20xx
Thousand death rate is 0;
Thousand serious injury rate is 0;
Thousand minor injury rate is 0;
Occupational disease incidence rate is 0;
Major equipment accidents are 0;
Major fires and other accidents are 0.
I am consciously abide by the above commitments. I consciously abide by the above commitments, and I am willing to take responsibility for any violation. This commitment is effective from the date of signature.
Commitment (signature): Type of work: Position Affiliated departments:
Department head (signature):
Monthly
Safety Guarantee Part 51. The personnel on duty must be correctly dressed in labor protection supplies, lesbians should be hair coiled, prohibited with disease or drunkenness on duty.
2. The personnel should be familiar with the working principle of the part of the equipment, process flow, operating procedures and operating parameters.
3. filler layer and nozzle due to scale, sludge resulting in blockage, must confirm the pulling of the blackout license plate before removal operations.
4. Cooling tower outlet cooling water temperature exceeds 50 ℃ should be immediately shut down to check and deal with.
5. Cooling tower cooling water tank water in every 2 months of operation or stop the kiln maintenance for a complete replacement, and cleaning of the tank to prevent long-term operation of the cooling tower to make the cooling water concentration in order to prevent the cooling tower internal and equipment cooling parts of the corrosion and scale formation.
6. fan in the operation of the cooling tower must be carefully checked before the internal and fan blades on the presence of foreign objects and in the hand can be flexible disk blades in the case (especially after fan maintenance and snow), such as the existence of the above conditions need to be cleared, and to confirm that the lubricating oil level in the normal oil level above the start-up. Fan in the process of running prohibit people from entering the cooling tower.
7 found during operation of the reducer or motor abnormal vibration or noise, should be immediately shut down to check and deal with, in the test run no abnormalities before entering normal operation.
8. During the operation, the oil level is found to be abnormally low, the oil level meter and piping leakage, the oil level should be stopped immediately for inspection.
9. Cooling water pump before starting should confirm the water level in the cold water tank, inlet and outlet valves open and close the state, and open the pump upper exhaust holes for exhaust, the above order is completed before starting.
10. Cooling water pump in the operation process of the front and rear axial disk root water leakage, unit vibration, export pressure to be closely monitored, abnormalities should be contacted with the professionals shutdown (single operation can be switched to run) to check and deal with;
11. Winter pump shutdown, the pump should be closed to the inlet and outlet valves, open the upper part of the pump discharge port to release water.
According to the mine 20xx production task index, in order to effectively guarantee the safe production of the mine, and fully coordinate the daily production tasks of the mine departments and districts, to ensure the safe and healthy development of the mine, the department has voluntarily signed the following commitment, and conscientiously fulfill it.
1, strict and conscientious implementation of safety laws and regulations: adhere to the "safety first, prevention first, comprehensive management" approach to safety. Firmly establish: "people-oriented, safety for the day" ideology, in accordance with the safety laws, regulations, instructions and relevant regulations, systems in this department to seriously implement, seriously do a good job after the production of first safety work.
2, conscientiously implement the "safety first, prevention first, comprehensive management" of the production safety policy, comply with the production safety system and regulations, in strict accordance with the coal mine safety regulations, operating procedures, operating procedures for the command and coordination of production safety work.
3, in the professional leadership of the command, make every effort to do a good job of electromechanical, transportation safety and quality standards, and effectively grasp the electromechanical site management, strict and conscientious operation of the safety and health management and control system, comprehensively exclude the sources of danger in the mine, to prevent the spread of hidden trouble, to ensure that the mine safe production.
4, monitoring and management of the mine major systems to establish and transform the work, to ensure the safe and stable operation of the mine's major systems, to eliminate systematic safety hazards, to ensure the smooth progress of mine production safety.
5, full coordination of professional safety management work, do a good job in the mine production equipment use and transfer work, strengthen the electromechanical equipment on-site supervision and inspection, to ensure the safe and stable operation of equipment, management of the main production equipment safety debugging work for the safe production of the mine foundation.
6, when an accident occurs, in accordance with the emergency measures procedures in a timely manner to notify the relevant leaders and departments, immediately organize on-site rescue and relief work, and then seriously analyze the report, responsible for the accident to pursue the responsible unit and the responsible person, to formulate precautionary measures to prevent the occurrence of accidents and hidden dangers.
7, to put an end to illegal command, do not violate labor discipline, take the initiative to stop and correct violations, rigorous investigation of the post of the daily code of conduct, do a good job of professional management.
8, the full operation of the implementation of the "safety and health control system", seriously do a good job in the professional risk management and control and hidden trouble detection and management, detailed and correct analysis, judgment and treatment of various accidents in the beginning, to nip hidden accidents in the bud.
9, in accordance with the implementation of the professional rules and regulations and management methods, do a good job of hidden security risks and risk management and control work, organized three times a month on-site hidden danger investigation, and timely development of corrective measures. Organizations involved in the work of the profession to carry out prior security risk assessment, careful analysis of potential risks, the development of corrective measures, found high or higher risk immediately develop improvement measures.
10, commitment date: January 1, 20xx - December 31, 20xx.
Commitment unit head: XX
20xx X month XX
Mine head: XX
20xx X month XX
Electrical and Mechanical Section
January 20XX
Safety Guarantee Letter Part 7To ensure that I myself in the midterm examination during the normal level of play, to achieve excellent results, safe and
In order to ensure that I can perform well during the examination and achieve excellent results, I will take the graduation examination safely and smoothly. Special to the school, parents to ensure that the following points:
1, seriously study and comprehend the school leadership, teachers, safety education and discipline requirements, to do "everything is the first to talk about safety, all actions listen to the command.
2, by car: (1) obey the management of the school team teachers. Go back and forth in the same car, unified in the school bus to the test point, the end of the test and then unified in the test point bus back to the school. (2) Obey the command of the lead teacher, be a civilized passenger, get on and off the bus and take a seat in an orderly manner, don't stick any part of your body out of the bus, don't do what the vehicle management personnel don't allow you to do, and don't allow you to get on and off the bus in the middle of the bus. (3) Take care of your luggage and belongings. (4) In the event of special circumstances events in a timely manner to contact the lead teacher to coordinate the handling, do not trespass.
3, accommodation: (1) uniformly obey the lead teacher arrangements, in the examination point school meals, rest.
(2) Candidates are not allowed to buy moldy, spoiled, corrosive food, so as to avoid poisoning; not allowed to accept the gift of food from strangers.
(3) Candidates are not allowed to go out drinking, smoking; go to Internet cafes, concert halls and other entertainment venues.
4, the examination: carefully study and comprehend the content of the code of conduct for candidates, carefully check all the supplies and precautions for the examination, the integrity of the examination, and resolutely do not do things that violate the discipline of the examination, we should be relaxed into the examination room, seriously answer the questionnaire.
5, to comply with the requirements of the school discipline, care of the school all public property.
6, civilized interaction. It is strictly prohibited to fight, prevent conflicts with strangers, and find a timely solution to the lead teacher.
7, it is strictly prohibited to leave the collective and test school alone. Something really need to do need to take leave from the lead teacher, by the lead dry and teachers agree to go together.
8, the test stationery and valuables to keep their own.
9, strengthen the organization and discipline, obey the management of the team. Remember the cell phone number of the teacher in charge of the team, so that you can contact them in time.
10, the end of the examination, the candidates returned to the school after the collective dismissal, you must immediately go home, not allowed to go home, not to engage in partying, not to go down to the river to bathe. Only after parental consent can go out.
Student Signature: XXX of Class XX of Grade 9
Parent Signature: XXX
XXX of 20xx
Safety Guarantee Part 8Whenever the engineering construction unit undertakes the projects of Guangbai Company Limited or carries out the engineering construction within the scope of the Company, the construction unit and the contracting unit promise that they will strictly abide by the following items to the Property Operation Center of Guangbai Company Limited. Commitment to ensure strict compliance with the following provisions:
I. Obey the management of the management department and on-site management personnel. Before the construction, we will do the relevant engineering declaration and approval and renovation entry formalities, and post the Construction Permit in the conspicuous place of the construction site. Construction workers and work management personnel into the site must wear Guangbai "temporary access badge", violators will be confiscated documents, and invited out of the construction site. Construction tools, instruments, etc. should be in line with the safety standards promulgated by the relevant state departments and remain in good condition before entering the site.
Second, seriously and effectively grasp the fire, electricity safety work. The construction site must be equipped with fire fighting equipment in accordance with the provisions of the gas, welding and heating and other fire operations, in accordance with the provisions of the property management department for the "fire certificate" and equipped with adequate fire fighting equipment and designated supervisors before construction, violators are fined 20xx yuan / times; construction of electricity and water connection must be carried out in the Guangbai property management personnel under the guidance of the management of the Department of the power line shall not be pulled haphazardly, violators deducted default payment of 300 yuan / Zong; Construction site is strictly prohibited smoking, burning debris and fire cooked food, violation of the fine of 100 yuan / times; decoration materials should be selected in accordance with the provisions of the city or district fire department, and in the materials or finished products into the field, the purchase of a copy of the invoice of the fire-retardant materials to the safety inspector for review, does not meet the requirements of the materials or finished products are not allowed to enter the field, and bear the responsibility of turning over the work and delay in the work schedule.
Third, the construction of hidden works before the closure, must be approved by the management and management inspection before continuing the construction; modify the drawings or programs, must be reported in writing to the property management department, approved before starting, otherwise the illegal works must be halted, and will be illegal part of the restoration of the original, and thus the required costs paid by the construction unit.
Fourth, strictly abide by the national "family planning" of the relevant management regulations. The construction unit must strengthen the management of family planning and education of employees, not to recruit "three noes" and violate the "family planning" provisions of the personnel to work on the site, and bear the responsibility for violations of family planning work.
Fifth, in the shopping mall construction, business hours shall not be large dust, noise and irritating odor producing operations. If the process requires that the above operations must be carried out, it must be applied to the Department of Management in advance to arrange for the construction of the night after closing.
Sixth, regularly clean up the residual mud, waste, garbage, sewage, etc., to keep the site environment clean, do not urinate or defecate, indiscriminate dumping of sewage, dyes, garbage, sundries, violators of the fine of 100 yuan / time, and must be responsible for cleaning, repair work. If the sewer is blocked due to the above reasons, you will be responsible for all the cleaning costs.
VII, care for the building's public **** facilities. Material transportation and removal of sludge and garbage, shall not damage the freight elevator and stairs and other public **** facilities, such as damage to the price of compensation. All decoration waste and construction materials, must be placed in a safe place, avoid placing high, so as not to fall from a high place endangering passers-by.
Eight, bear the violation of safety regulations and tools, equipment accidents caused by casualties, fire accidents full responsibility.
IX, construction is complete, close all the windows and doors, hoses and temporary power switch before leaving.
This guarantee takes effect from the implementation of the project, and naturally expires after the completion and acceptance of the project. If you fail to return this guarantee in time, your construction work in Guangbai will be stopped immediately.
Project construction unit: (seal) Project contracting department: (seal)
Responsible person: Responsible person:
Year month day year month day
Safety Guarantee Part 9Dear XX:
In order to ensure that our winter health and safety, have a healthy body, and the successful completion of the study task, I promise to do the following:
1, do not take any personal responsibility, do not take any personal responsibility, and do not take any personal responsibility, and do not take any personal responsibility. >
1, do not privately go down to the river, ponds, reservoirs and other waters to skate or play.
2, consciously abide by traffic rules, pay attention to traffic safety. Do not ride on the road, do not chase climbing vehicles.
3, do not play with fire, do not contact flammable and explosive substances.
4, do not casually touch electrical equipment, do not fight.
5, do not enter the Internet cafes, do not smoke, do not drink.
6, without parental consent do not go out, accommodation and travel.
7. Do not climb high, do not enter construction sites and dangerous restricted areas.
To this
Salute!
XX
XXXX, XX/XX/XXXX