DC40 series: DC40, DC40A, DC40B, DC40C, DC40D, DC40E (body diameter is about 4cm).
DC50 series: DC50, DC50A, DC50B, DC50C, DC50D, DC50E and DC50F (about 5cm in diameter) voltage range: dc4.5v ~ dc24v
Current range: 0.1a ~ 3.8a.
Lifting range: 0.5M~ 15M
Flow range:100l/h ~ 3600l/h.
Power range: 0.5W~86.4W
Working temperature: -35℃- 100℃.
Job requirements: continuous (water must be guaranteed)
Noise: ≤ 40dB or 35dB (distance 1m)
Waterproof: completely waterproof (waterproof grade IP68), submersible installation or external speed regulation (flow regulation and head regulation): only applicable to three-phase brushless DC water pump 1. Long life, maintenance-free, small size, high efficiency, low power consumption, strong anti-interference ability and stable operation.
2. No carbon brush, no pollution, electronic commutation and long service life.
3. The stator and circuit board of the motor are encapsulated by epoxy resin and completely isolated from the rotor, which solves the leakage problem caused by long-term diving of the motor DC pump, and can be installed underwater and completely waterproof.
4. The parameters of the pump can be adjusted according to the customer's requirements. The 24V pump can adjust the lift of 2m or 7m, with constant volume and wide voltage operation.
5. The water pump shaft adopts high-performance ceramic shaft (stainless steel shaft can be selected to reduce the cost), which has high precision and good wear resistance. Due to the precise matching between the high-precision shaft sleeve and the ceramic shaft (other materials can be used to reduce the cost), the noise is low, and the noise with low power can even reach below 30 dB.
6. The three-phase Hall-free program-controlled DC water pump in the water pump series can realize PWM speed regulation, analog signal (0~5V) speed regulation and potentiometer VR manual speed regulation, realize adjustable flow and lift, and customize the music fountain.
7. The three-phase DC water pump in the water pump is soft-started, with no impact and low startup power consumption. The circuit board is completely separated from the pump body, and there are no electronic components in the pump body. The pump body is made of high temperature resistant materials, and the pump can be used for a long time at the water temperature of 100 degrees. It has impeller and rotor locking protection, reverse connection protection, overload protection and overcurrent protection.
8. The water pump interface is rich, with four threads and two threads, and the inlet and outlet are 8mm, 10mm, 22mm, 27mm, etc. Can also be customized according to customer requirements.
9. If you need to increase the lift of the pump, you can also connect the pumps in series, and the lift can be doubled.
9. Amphibious (for external use, the installation position is lower than the liquid level)
10. The water pump and its related control system can be customized according to user's requirements. Automation equipment, water circulation, water refrigeration and other electrical appliances, drinking fountains, bathroom products, shredders, soilless culture, water-heating mattresses, air-conditioning pumps, fish tanks, desktop crafts, foot baths, water-heating mattresses, water heaters, computer water cooling, water-cooling fans, medical devices, pharmaceutical systems, chemicals, circulation systems, cooling and heat dissipation systems, refrigeration systems, solar fountains, small irrigation systems, water treatment systems, small-sized ones.