Today, I'm going to teach you how to unlock the location of the account locking function, so that the receiver can watch TV programs normally in other places:
When you take the account card sent by your hometown to other places, you can't read it normally. You can only watch it for 5 minutes at most, and the receiver will automatically lock! Turn it off and then on, you can only watch it for 5 minutes, and then the receiver will automatically lock again! As shown below: If the location information changes, please contact the customer service center.
View big picture
Step 1: First, open the receiver shell, take it out, put your mobile phone card into the mobile phone card slot inside the receiver, and turn it on!
View big picture
Then, press the menu and enter the password in the system settings: 9999. Then go back to the factory and restore the factory! As shown in the figure below:
View big picture
Continue to look at the picture below:
View big picture
Then turn it off and on again, and the receiver will automatically search for programs. After the search is completed, 57 TV programs will be displayed, as shown in the following figure:
View big picture
Then, take a TV card that can be watched normally locally from this receiver and put it into the receiver you want to relocate, and the following figure will appear:
Then, turn it off and on again, put the original TV card back into the receiver you are positioning and wait. ......
Press F4 on the remote control to scan the base station, and then return!
Wait a long time until the TV program appears on the screen. Then, see if it solves the problem? Watch it for at least 5 minutes. If the words "location information has changed, please contact customer service center" do not appear on the top right of the screen, it proves that the receiver can watch the program normally!
Precautions:
When you take the home phone receiver to other places for positioning, you must use the mobile phone calling card for positioning, and the card used for positioning must be
Enable the GPS function, that is, this calling card can be located by logging in QQ, otherwise it won't work!
Also, after returning to the factory, insert a TV card in your receiver as a temporary location mark. This card can normally watch TV programs for up to 30 seconds, and then you have to plug the original TV card into the receiver.
If the previous positioning has not been unlocked normally, then look at the picture below. Is it the same?
It is best to ask, the actual location you want to locate, the area code used for household registration is different from place to place! Please correct the area code!
Check the network connection settings: data unification!
Version information is for reference only and will not affect the actual viewing!
Inter-provincial user account cracking method:
1. A breakthrough has been made in replacing the module with a single chip microcomputer, and many experiments have been successful.
2. According to the information obtained, the third generation positioning module is mainly the strategy of SARFT to deal with CATV. 3. 100000000 After the confirmation of multiple bidding users, the positioning module was cracked, and it was impossible for SARFT to launch the 4th generation machine. 4. According to the technical specifications of the chips and third-generation computers used now, we can know that the positioning module is a distraction, and it is easy to cancel the positioning in software.
Brief introduction to the localization and erasing tools in Chinese version of Huhutong STB -20 12;
1. Connect the RS232 interface between the serial number computer and the set-top box, and keep the set-top box closed during this process.
2. Double-click to open the Chinese set-top box position erasing tool. exe。
3. Select the option to clear files, and then click OK.
4. Select the serial port you are using in the pop-up interface, and fill in the length of 0 and 4000 at the beginning.
5. Click OK to turn on the power. After the set-top box is started, there will be an erase progress bar, and the progress bar will disappear automatically, indicating that the erase is complete.
6. Disconnect the set-top box. Replace the set-top box and repeat step 5.
After successful erasure, plug in the set-top box and turn it on. The TV screen will prompt "module ready successfully" or automatically pop up the base station information list, indicating that the set-top box and the module are successfully matched. Card opening operation can be performed.