? Strengthen the publicity of heatstroke prevention knowledge and improve self-protection capabilities. A new summer is about to begin. Heatstroke is easy to occur in hot weather. When you feel dizzy, headache, or nauseous, it is best to rest in a cool place immediately. What should you pay attention to when writing a summer heatstroke prevention and cooling plan? In order to meet your needs, I specially compiled "Maintenance and Heatstroke Prevention and Cooling Measures (6 Practical Articles)", hoping to provide you with more reference. Maintenance and Heatstroke Prevention and Cooling Measures (6 Practical Parts) Part 1
? 1. The purpose and requirements of the exercise.
?In order to implement occupational health and safety management system standards, respond to potential heatstroke prevention and cooling accidents, ensure the personal safety of employees, clarify emergency rescue procedures, and ensure the orderly implementation of first aid plans, this plan has been specially prepared.
? 2. Basis for preparation.
?1. "Production Safety Law of the People's Republic of China".
?2. "Regulations on the Safety Management of Hazardous Chemicals".
?3. "Guidelines for Preparing Emergency Plans for Work Safety Accidents in Production and Business Units"
?3. Exercise time, location, and participants.
?1. Exercise time: 13:00-13:30 on xx, xx, 20xx.
?2. Exercise location: The area around the 1# stack on the operating side of the production department xx.
?3. Participants in the exercise: exercise leadership group, operation area A, warehouse class A, and package turning team.
?4. Exercise leadership group.
?1. Team leader: xx.
?2. Deputy team leaders: xx (command), xx (organization), xx (organization).
?3. Planning: xx.
?4. Team members: xx, xx, xx.
?5. Rescue equipment and supplies:
?First aid kit (medical alcohol, Rendan, Ten Dishui, Huoxiang Zhengqi water, bandages, disinfectant), communication tools, towels , mineral water, electric fan.
?6. Exercise process:
?1. Crosscut employee xx fell to the ground due to heatstroke while working on stacking #1 (simulating an accident). After the squad leader xx found out, he notified The shift leader is xx.
?2. After receiving the accident report, the operation leader xx immediately reported it to the exercise leadership group, activated the emergency plan, and organized on-site rescue.
?3. xx: While rescuing, isolate and protect the scene, evacuate irrelevant personnel, and protect the accident scene.
? 7. First aid steps:
? 1. Relocation: Operation leader xx organized on-site personnel to quickly carry the heat stroke employee xx to a ventilated, cool and refreshing place to make him stable Lie down, raise your head, and unbutton your clothes, loosen your belt and cuffs.
?2. Cooling: Cover the patient's head with a wet towel and bathe with cold water to speed up heat dissipation. However, do not blow directly on the patient to prevent colds.
?3. Hydration: If the person with heat stroke is conscious and has no nausea or vomiting, he or she can drink salt soda to cool down and replenish blood volume. When replenishing water, do not rush to replenish a large amount of water to avoid causing vomiting, abdominal pain, nausea and other symptoms.
?4. Promote awakening: If the patient has lost consciousness, you can pinch Renzhong, Hegu and other points to wake him up. If breathing stops, artificial respiration should be implemented immediately.
?5. Transfer: Patients with severe heat stroke must be sent to a doctor for diagnosis and treatment in time. During transportation, physical cooling should be carried out as much as possible to protect important organs such as the brain, heart, and lungs. You can use a cold compress on the head, or use medical alcohol to wipe and bathe until the skin becomes red.
?6. Employees with heatstroke slowly wake up after emergency rescue.
?7. After confirmation, the operation leader Yan Wei reported to the exercise leadership group that the on-site exercise of the heatstroke prevention and cooling emergency plan was completed.
? 8. The exercise leading group summarized the exercise and announced the end of the exercise.
?9. Exercise personnel evacuate the exercise location and all units resume operations.
?10. Summarize the problems existing in the exercise and formulate improvement plans.
Maintenance and heatstroke prevention and cooling measures (6 practical articles) Part 2
?1. Purpose:
?During the summer work process, due to the large number of open-air working environments, the work distribution area of ??personnel is complex, The changes, high labor intensity and other aspects have brought a lot of inconvenience to the work. In order to protect the legitimate rights and interests of workers, life safety, and property safety, and create a secure and comfortable environment for staff
?2. Scope of application:
?This system applies to xx Project Department of xx Electric Power Construction xx Company.
?3. Specific provisions:
? (1) Conscientiously implement the responsibility system for heatstroke prevention and cooling.
? Relevant units must conscientiously implement a series of requirements on heatstroke prevention and cooling at construction sites, and effectively strengthen the organization and leadership of heatstroke prevention and cooling work with a high degree of responsibility for the lives and health of front-line construction workers. , improve and implement the responsibility system, formulate emergency plans, and pay close attention to the implementation of preventive measures to prevent worker heat stroke and various production safety accidents caused by high temperature weather.
? (2) Arrange your work and rest time reasonably.
? Pay close attention to meteorological forecasts related to high temperature weather. Meteorology defines a daily maximum temperature greater than or equal to 35 degrees Celsius as a "high temperature day", and a "high temperature day" for more than 5 consecutive days is called a "continuous high temperature" . Strictly implement the "grasp the two ends and rest in the middle" measures to avoid high temperatures, appropriately adjust the labor and rest system for high-temperature operations in summer, reduce labor intensity, strictly control outdoor operating time, avoid operating during high-temperature periods, and ensure the health and life safety of workers. In principle, if the temperature exceeds 37°C, outdoor work is strictly prohibited from 11:00 to 15:00.
? (3) Strengthen rotation breaks at work.
?In the summer, according to the construction process, labor organization should be adjusted as much as possible, and frequent shifts should be adopted to shorten one continuous operation time and strengthen rotation and rest during work. Strengthen on-site inspections, increase the publicity of heat stroke prevention and cooling knowledge and heat stroke first aid knowledge, and improve the safety awareness of all employees.
? (4) Ensure adequate supply of drinking water on site.
? Sufficient drinking water, beverages, tea and various soups that meet hygienic requirements should be provided on site to effectively prevent and cool down the heatstroke and avoid heat stroke events.
? (5) Implement heatstroke prevention and cooling items.
? We must pay close attention to the vast number of front-line construction workers who insist on construction in hot weather, strengthen the publicity of heatstroke prevention and cooling knowledge, and require construction workers to carry heatstroke prevention medicines with them, such as: rendan, cooling oil, and Fengyoujing. etc., and implement heatstroke prevention and cooling items for every worker.
? (6) Actively improve the production and living environment at construction sites.
It is necessary to conscientiously implement construction site management regulations, actively take measures to strengthen ventilation and cooling, ensure that temporary facilities such as dormitories, canteens, toilets, and shower rooms for construction workers meet the needs for heatstroke prevention and cooling, and provide cooling for construction workers Beverages and commonly used anti-stroke medicines. Fans must be installed in dormitories and canteens at construction sites. Units that have conditions should install air conditioners in dormitories.
? (7) Effectively carry out health and epidemic prevention work.
? It is necessary to effectively carry out sanitation and epidemic prevention work at the construction site and living areas, strengthen the sanitation management of drinking water and food, strictly implement the food hygiene system, and avoid poisoning incidents caused by food spoilage; For disease monitoring, when on-site workers develop notifiable infectious diseases or food poisoning, they should report to the relevant competent authorities in a timely manner.
? (8) Do a good job of fire prevention in summer.
?In view of the actual situation that fire accidents are prone to occur due to hot and dry weather in summer, further strengthen fire prevention measures, conduct regular inspections of flammable places such as power distribution rooms, warehouses, and paint rooms, and deal with problems immediately if they are found , and at the same time be equipped with fire extinguishing equipment as required. Maintenance and Heatstroke Prevention and Cooling Measures (6 Practical Parts) Part 3
?In order to ensure the smooth construction of the new Xingtai modified asphalt base project in Hebei, and to ensure that when an emergency occurs during construction, the emergency rescue work can be rapid and effective, to the maximum extent In order to protect the life and property safety of enterprise employees to the maximum extent, this plan is specially formulated according to the characteristics of this project.
? 1. This plan is formulated for various emergency situations during construction to ensure that various emergency resources are in a good state of preparation; it can also guide emergency operations to be carried out in an orderly manner as planned to prevent accidents. Inadequate action or confusion in on-site rescue work delays accident response, thereby reducing casualties and property losses. Emergency situations during construction refer to various types of construction work-related injuries that are sudden in nature and cause or may cause a large number of casualties and large economic losses.
? 2. Establish a construction emergency emergency leading group to be responsible for the command and coordination of emergency rescue work. Sun Qi, the branch manager, is responsible for the implementation of the leadership team as the general commander. If the general commander is away, the manager's assistant Lu Zhili will serve as the deputy general commander to provide implementation. When the deputy general commander is absent, the squad leader will implement the implementation. For the implementation of rescue work, please refer to the emergency plan organization for specific personnel arrangements.
? 3. When various emergency symptoms of high temperature occur during engineering and construction, this plan should be activated immediately after receiving the emergency report. Immediately seek help from the company's emergency rescue command center and "120" rescue center, and report the situation to the Municipal Bureau of Work Safety, the Federation of Trade Unions and other relevant departments. After an emergency occurs, follow-up information should be continuously reported to relevant leaders and departments.
?4. After an emergency occurs during construction, the branch company will establish a rescue on-site command center as appropriate. Manager Sun Qi will serve as the overall commander of the accident site, and the following leadership group will be established:
< p> ?1. Heatstroke prevention and cooling guarantee team?During the summer work process, due to the large number of open-air working environments, complex and changeable distribution areas of personnel, and high labor intensity, the work has been affected. Many inconveniences. In order to protect the legitimate rights and interests of workers and the safety of life and property, and create a secure and comfortable environment for workers, when a worker has an adverse reaction to high temperature, the team leader will immediately organize the team members to transfer and control the accident personnel , to prevent the increase in accidents at surrounding sites. Make emergency operations more targeted and improve the efficiency of operations. To avoid causing huge accident losses.
?2. Information Liaison Group
?The team leader is responsible for understanding casualties, economic losses and the scope of emergency situations, organizing and collecting weather and temperature conditions every day, and then taking necessary precautions Measures taken, and timely reports to superiors and liaison with relevant departments on the measures taken and the development of the situation.
?3. Security (alertness) team
?For the security work in the evacuation area and resettlement area, the team leader shall organize team members to monitor the development of dangerous situations to prevent the impact During the construction period, we will strengthen safety education for each team member to further improve safety awareness and organize on-site management personnel to conduct safety inspections on the construction site to eliminate safety hazards to prevent the occurrence of malignant accidents and how to control the impact of the accident once it occurs. Minimum range.
?4. On-site medical rescue team
?When an accident occurs, the team leader organizes the team members to conduct on-site classification and first aid treatment of the injured, and is responsible for providing treatment to the injured as soon as possible Provide effective rescue and timely transfer to the hospital. The main responsibilities of rescue personnel are: to enter the accident area to rescue the wounded; to guide people in the hazard area to carry out self-rescue and mutual rescue activities; to gather, count, transport and treat the wounded. According to the specific situation, quickly formulate emergency response plans and organize their implementation.
?5. Logistics support team
?The team leader is responsible for organizing and mobilizing rescue personnel, materials and equipment, and supervising and inspecting the implementation of various rescue and disaster relief measures.
? 5. After an emergency occurs during construction, the rescue site headquarters can mobilize the nearest rescue team, personnel, materials and equipment from the Xingtai Luqiao asphalt depot based on specific circumstances. At the same time, professional rescue teams, supplies and equipment were mobilized from the emergency reserve rescue team.
?6. After various emergencies occur, the main professional rescue teams and emergency rescue supplies that need to be mobilized. The main material and personnel responsibilities are arranged as follows:
?1. Personnel and material preparation:
?The manager is responsible for the purchase of branch materials. The main drugs and medical rescue equipment are as follows:
? p>
? (1) Medicines: cold medicines, fever medicines, diarrhea medicines, anti-inflammatory medicines and other therapeutic medicines, as well as Rendan, Ten Dishui, Zhengqi water, chrysanthemum tea, fire-reducing herbal tea, green health food, mung bean water, etc.
? (2) First aid equipment: single frame, ambulance car, small oxygen cylinder, handset, hospital bed, towel, medical kit, freezer (ice cubes), etc.
?7. Rescue methods:
?1. Mild patients
?When on-site staff experience dizziness, fatigue, or dizziness, work Personnel should stop working immediately to prevent secondary accidents. Other surrounding staff should arrange for symptomatic persons to rest in a cool, well-ventilated area and provide them with cold water, wet towels, etc. And notify the branch leaders.
?2. Severe patients (fainting, shock, severe lack of water, etc.)
?When a person suffering from heat stroke occurs at the work site, those working around the operation should immediately notify the branch leader and Immediately move the accident victims to a cool and ventilated area and observe their symptoms so that medical personnel can obtain first-hand treatment information when they arrive. The branch factory should decide whether to activate the emergency plan for heatstroke prevention and cooling according to the specific situation and the emergency commander. And immediately organized rescue personnel to go to the scene to treat the accident victims. Those with severe symptoms should be transferred to the nearest hospital for observation and treatment as soon as possible if the branch's medical equipment cannot treat them. and report it to the company.
?7. Follow-up work:
?1. According to the "four no-misses" principle of the accident, carefully investigate and handle the accident, and take targeted preventive measures , strengthen publicity and education for each team so that everyone knows the precautions during summer construction, so that everyone knows how to protect themselves and how to rescue others. To sum up experience and lessons and prevent similar incidents from happening, the specific preventive measures are as follows:
? (1) The information team sets up thermometers at the construction site, collects and processes daily weather conditions, and then reports the results The factory's heatstroke prevention and cooling protection team will take corresponding safety precautions according to specific circumstances.
? (2) When the outdoor temperature is higher than 39°C, the branch factory should conduct special safety briefings on construction cooling for each team and order them to stop on-site construction operations.
? (3) The logistics support team should be able to ensure drinking water and emergency medicines for staff on site at any time.
? (4) The heatstroke prevention and cooling emergency rescue agency will develop a reasonable and effective "personnel work and rest schedule" based on the temperature conditions of the year to avoid the highest time of daily temperature (11:00 ~ 15:00) to carry out construction work. After discussion at the branch office, the company's summer construction work schedule has been specially formulated (July to September based on the city's high temperature months over the years). The details are as follows:
?AM: 8:00～12:00 < /p>
?Afternoon: 15:00～19:00
?If overtime is required in case of deadline or other special circumstances, further notice will be given.
? (5) The branch company conducts safety education for each team to enhance the staff's ability to deal with various situations. Strengthen the publicity of summer construction safety, so that everyone can understand and master the safety knowledge of heatstroke prevention and cooling, and improve the staff's adaptability and processing ability in practice.
?8. Emergency recovery and re-entry
?When the emergency is restored, the danger zone must be evaluated before re-entering, and the accident should be analyzed. After the danger zone has been determined to be safe Only then can you enter the site and continue the operation.
?9. Emergency drill
?After the emergency plan and emergency plan are established, and after effective training, the branch factory or company conducts a large-scale rescue drill before the arrival of summer every year. At the end of each drill, a summary will be made in a timely manner, and any gaps that exist will be improved in future work.
?1. Purpose of the drill
?1) Test the effectiveness and adequacy of emergency plans and implementation procedures
?2) Test emergency equipment< /p>
?3), ensure that emergency response organization personnel are familiar with their tasks and responsibilities
?4), test the coordination ability of emergency personnel
?5), identify and Correct defects in the plan
?6) Test the adequacy and effectiveness of emergency equipment
?2. Emergency plan drills
?In order to improve rescue The technical level of personnel and the overall ability of the rescue team are required to achieve fast, orderly and effective results in accident rescue operations. The branch company will conduct a rescue drill regularly. Emergency rescue training has become an important task for the rescue team. Therefore, the branch company also emphasizes the following four points during the emergency rescue process:
? (1) Drills All personnel must arrive on time and wear their own protective equipment.
? (2) During the rescue process, "self-protection and rescue of others" and active and effective rescue should be achieved.
? (3) We must strictly abide by the instructions of the relevant leaders, "discuss the truth from the false", and effectively implement rescue measures.
? (4) The basic tasks of emergency training and drills are: to train or improve the team's ability to quickly rescue and block sources in the event of an emergency, to promptly rescue the wounded, to correctly guide and help the masses to protect or evacuate, and to effectively Eliminate harmful consequences, carry out emergency rescue skills and comprehensive emergency response skills such as on-site first aid and casualty transfer, effectively reduce accident hazards and reduce accident losses. Maintenance and heatstroke prevention and cooling measures (6 practical articles) Part 4
? 1. Purpose:
? Entering the midsummer season, in order to avoid safety accidents caused by high temperatures and heat and protect the health of workers , Continuously improve working conditions and prevent workers from heatstroke and other types of production safety accidents caused by hot weather. All workshops and departments must attach great importance to it, take measures, highlight key points, effectively strengthen the supervision and management of production safety, and strictly prevent the occurrence of various accidents. The measures for safe production during the high temperature period in summer are now as follows:
? 2. Establish a leading group for heatstroke prevention and cooling:
?Team leader: xx
? Deputy leader: xxx
?Members: xxxx
?The leading group office is located in the Safety and Environmental Protection Department, and xxx serves as the director.
?Office phone number 7346
?3. Specific measures for heatstroke prevention and cooling:
?(1) Earnestly implement the responsibility system for heatstroke prevention and cooling. All workshops and departments must conscientiously implement the specific requirements for heatstroke prevention and cooling at the production site. They must take a highly responsible attitude towards the lives and health of front-line employees, effectively strengthen the organization and leadership of heatstroke prevention and cooling work, improve and implement the responsibility system, and formulate emergency response plans. Prepare emergency plans and pay close attention to the implementation of preventive measures to prevent workers from heatstroke and various production safety accidents caused by hot weather.
? (2) Comprehensively organize summer safety inspections. It is necessary to effectively strengthen production safety, take the prevention of various accidents caused by natural disasters such as high temperatures in summer and strong convective weather as the top priority, comprehensively organize various professional departments and workshops to conduct seasonal inspections, and implement
? Formulated Preventive measures are taken to curb the occurrence of accidents during high temperatures.
? (3) Strengthen operational safety during maintenance. It is necessary to highlight the management of hidden dangers in key projects, especially supervision of electrical and gas welding operations, limited space, and high-altitude operations, and strictly implement safety precautions before maintenance. Personnel participating in maintenance should strictly abide by the safety measures of the "Maintenance Safety and Environmental Protection Plan". Hold a pre-maintenance meeting and provide "five handovers" to the personnel participating in the maintenance, namely handing over construction tasks, handing over safety measures, handing over safe maintenance methods, handing over safety precautions, and handing over compliance with relevant safety regulations. Guardians must be on site from beginning to end and cannot leave their posts without permission. They must carefully inspect the construction site and implement safety technical measures.
? (4) Strengthen the safety control of hazardous chemicals.
In view of the situation that rising temperatures can easily cause the volatilization, leakage and deflagration of hazardous chemicals, it is necessary to increase the monitoring of major hazard sources of hazardous chemicals and ensure the explosion protection, lightning protection and leakage prevention of hazardous chemical equipment and pipelines. work, conscientiously implement ventilation, cooling, waterproofing, moisture-proof, fireproof, explosion-proof, lightning protection and other measures in hazardous chemicals production and storage places. Warehouses and pump rooms should be ventilated at all times, and storage tanks should ensure that alarm devices are in good condition; hazardous chemicals Production and storage must achieve "three inspections a day" and "three determinations" (i.e. quantitative storage, regular temperature measurement, regular ventilation); loading and unloading stations must be prepared for lightning protection, anti-static, emergency rescue and accident handling. During the loading process, the loading flow rate must be strictly controlled to prevent the accumulation of static electricity. To avoid hot weather, loading and unloading operations at benzene hydrogenation storage and transportation, tar storage and transportation, and tar-modified asphalt loading and unloading platforms are prohibited from 11:00 to 15:00.
? (5) Strengthen rotation breaks at work. According to the links of operation activities, the labor organization is adjusted, inspection and maintenance workers adopt intermittent operations, and other on-site operations personnel shorten one continuous operation time and strengthen rotation and rest during work.
? (6) Ensure adequate supply of drinking water on site. The general office is fully responsible for the collection and distribution of various types of heatstroke prevention and cooling supplies and drinking water, and provides the workshop with sufficient drinking water, beverages, heatstroke prevention tea and various soups that meet hygienic requirements to effectively prevent heatstroke and cool down and avoid heat stroke. event.
? (7) Implement heatstroke prevention and cooling items. The Safety and Environmental Protection Department is responsible for the distribution of heatstroke prevention and cooling drugs in the workshop and the tracking and inspection of employees’ medication use. Strengthen the publicity of heatstroke prevention and cooling knowledge, require operators to take or apply heatstroke prevention drugs before work, such as rendan, cooling oil, Fengyoujing, etc., and implement heatstroke prevention and cooling items for every worker.
? (8) Effectively carry out health and epidemic prevention work. It is necessary to effectively carry out sanitation and epidemic prevention work on-site and in dormitories, and strengthen monitoring of drinking water and diseases prone to summer. When on-site workers develop notifiable infectious diseases or food poisoning, they should report to the dispatching and safety and environmental protection departments in a timely manner. Dormitory hygiene should be clean, the room should be moderately ventilated, pay attention to personal hygiene, and wash hands frequently with hand sanitizer (soap) and water, especially after coughing or sneezing. Cover your mouth and nose with a tissue when you cough or sneeze, then throw the tissue in the trash. Achieve "early detection, early reporting, early isolation, and early treatment" to improve employees' epidemic prevention capabilities and ensure personal safety.
? (9) Do a good job of fire prevention in summer. In view of the actual situation of hot and dry weather in summer, which makes fire accidents easy to occur, fire prevention measures are further strengthened. The electrical instrument workshop organizes regular special inspections of flammable places such as power distribution rooms and oil pump rooms. If problems are found, they should be rectified immediately to avoid accidents.
? (10) Do a good job in duty and information reporting. All departments and workshops must carefully formulate emergency plans for heatstroke prevention, flood prevention, fire prevention, and poisoning prevention, and prepare emergency teams and emergency supplies. Arrange the duty work during high temperature and strong convective weather. If any danger or accident occurs, you must report it immediately and rush to the scene to deal with it as soon as possible to prevent the accident from expanding. Maintenance and Heatstroke Prevention and Cooling Measures (6 Practical Parts) Part 5
?The summer is hot and the temperature is gradually rising. In order to further improve the work of summer heatstroke prevention and cooling, ensure the physical and mental health of employees, improve employees' work enthusiasm and enthusiasm, and ensure the safe, efficient and high-quality completion of various tasks in high temperature environments, the company has decided to carry out summer cooling activities. Now we will The relevant activity plans are as follows:
?1. Activity time
?August 5th to August 10th, 20xx
?2. Activity requirements
p>?1. The department head shall coordinate the arrangements for the cooling activities for the assigned projects.
?2. Each department will promptly deliver heatstroke prevention and cooling items to each project department within a week.
?3. During the event, special attention should be paid to the weather forecast, and event plans should be adjusted in a timely manner to ensure cooling services during key days and periods.
?4. All departments are required to communicate more with the project department employees while sending cool drinks, understand the needs of employees, and convey the company's concern to every employee.
Maintenance and heatstroke prevention and cooling measures (6 practical articles) Part 6
?1. Purpose
?In order to strengthen the labor protection work in high-temperature operations and high-temperature weather, and to effectively prevent heatstroke and cooling at construction sites in summer work, protect the health of workers, continuously improve working conditions, and prevent workers from heatstroke and other types of production safety accidents caused by hot weather. This plan is specially designed in accordance with relevant laws and regulations such as the Law of the People's Republic of China on the Prevention and Control of Occupational Diseases, the Labor Law of the People's Republic of China, and the Management Measures for Heatstroke Prevention and Cooling Measures.
?2. Scope of use
?All personnel and interns of Shuangfu Production Plant
?3. Definition of terms
?1 ) When the daily maximum temperature reaches above 35℃ and below 37℃, it is a general high temperature weather;
?2) When the daily maximum temperature reaches above 37℃ and below 40℃, it is a moderately high temperature weather;
?3) Severe high temperature weather when the daily maximum temperature reaches above 40℃;
?4) Sustained high temperature refers to "high temperature days" for more than 5 consecutive days
?5) High temperature weather operations It refers to the work that the employer arranges for workers to perform in high-temperature natural weather environments during hot weather.
?IV. Implementation time
?July 20xx to October 20xx (if the outdoor temperature continues to be above 36°C, the implementation date will be postponed appropriately)
?5. Relevant requirements
?1) Regulatory requirements: Yufu Banfa [20xx] No. 166
?During high temperature weather, the employer shall follow the following provisions and based on the production characteristics and specific conditions, take measures such as rationally arranging working hours, rotating operations, appropriately increasing the rest time of workers in high-temperature working environments, reducing labor intensity, and reducing outdoor operations during high-temperature periods:
? Employers should follow the municipal regulations The forecast temperature issued by the meteorological station affiliated to the meteorological department will be adjusted on the same day, and the operation time will be adjusted, except for emergencies that require emergency treatment due to rescue and disaster relief, personal and property safety, and public interests.
?(1) In general high-temperature weather, the employer shall adopt methods such as shift changes and rest breaks to shorten the continuous working time of workers, and shall not arrange for workers to be exposed outdoors
? Workers working overtime on days; Employers should effectively carry out heatstroke prevention and cooling work in hot weather, formulate and implement heatstroke prevention and cooling measures, and ensure the normal operation of heatstroke prevention and cooling equipment and equipment.
? (2) In moderately hot weather, the employer shall arrange for workers to work outdoors in the open air throughout the day in accordance with the relevant provisions of the General Work Safety and Health Administration [20xx] No. 89
? Implementation, and suspend outdoor open-air operations during the high temperature period from 12 to 16 o'clock. If the production process requires open-air operation during high-temperature periods, the employer shall reasonably adjust work and rest schedules and take heatstroke prevention and cooling measures.
(3) In severe hot weather, outdoor open-air operations should be stopped for that day. If the production process requires open-air operation, the employer shall reasonably adjust the work and rest time and take heatstroke prevention and cooling measures.
?2) On-site current situation:
?(1) Because the assembly workshop is hot; it is always exposed to the sun during working hours and has no ventilation. The ceiling is a board room that absorbs heat. In summer, the temperature can reach Fifty degrees Celsius; (2) The actual temperature at the assembly branch is more than 2° higher than the temperature in the Chongqing weather report. On July 9, four employees at the assembly branch had heat stroke;
? 6. Cost Budget:
?58,981 yuan
?(1) Budget for heatstroke prevention supplies: ￥15,400 yuan
?(2) Budget for refreshing drinks: ￥18,300 yuan
p>?(3) Cooling equipment budget: RMB 25,281
?1) Adjustment of high-temperature working hours in summer
?Remarks:
?7 From mid-month to October, it is estimated that there will be 65 days when the temperature will reach above 35°. When the temperature is above 35°, the following cooling foods will be prepared for the four major workshops:
?1. Mung bean soup: 30 kilograms of mung beans/day
p>?2. 10 jins of white sugar/day
?3. Summer-relieving tea: 1 jin/day