A, hand-held automatic locking screw equipment:
Hand-held is the hand-held automatic screwing equipment, it is somewhat different from the traditional. On the one hand, compared to the traditional one hand screw, one hand electric or air batch of locking screw action, hand-held automatic locking screw equipment can be freed up a hand out, when a lock is finished automatically send out the next one. On the other hand, the operation of handheld automatic locking screw equipment is very flexible, the product screw hole spacing is large or multi-faceted are screw holes in the product is more suitable for the handheld automatic screwing equipment by the automatic feeding and automatic detection system are able to continuously feed the material at the same time brush out the unqualified screws, and only need a hand to operate.
Two, multi-axis automatic locking screw equipment:
Multi-axis automatic locking screw equipment can not only be designed according to the structural characteristics of the product, different axes and the number of screws can be screwed in one operation. Can also be designed to connect the two stations, both screwed the product by the machine into the assembly line, without manual operation, completely by the machine in place of an automatic operation can be. No manual contact to ensure that the product clean automatic feeding. Automatic detection, set the torque can be, at the same time with the counting function, the output can be seen, can detect leakage and so on. Multi-axis automatic feeding and locking screw equipment to reduce the manual tedious repetitive operations, fundamentally improve labor efficiency, the maximum increase in factory capacity.
Three, XY type automatic locking screws equipment:
XYZ type automatic feeding and locking screws equipment, also known as robot locking screws equipment, both through the PLC to control the axis position, is the multi-axis automatic locking screws equipment extensions, the same multi-axis automatic locking screws equipment with the same advantages, which is characterized by the axis can be controlled, the operation of flexible, for enterprises with changing products. XYZ type automatic locking screws equipment is more for the enterprises whose products are changeable. Good versatility, stable performance, a machine can be locked at the same time not the same industrial products, but also to consider the size of the product and screws.