cnc glass cutting fluid circulation system

It is a comprehensive filtration equipment, this equipment is also the manufacturers more favorite supporting equipment, this high utilization rate, covers an area of moderate, save each set of supporting resources, more practical, efficient.

Centralized filtration unit:

1. The composition of the filtration unit Cheng Bo Machinery Technology specializes in providing design solutions

Can be a combination of magnetic separator, magnetic scraper sedimentation, flat mesh paper belt filtration, drum filtration, arc mesh filtration, negative pressure paper belt filtration. Reasonable selection of filtration form according to the required precision of user's production in order to obtain economic filtration precision.

2. System unit composition:

Automatic liquid dispensing unit, automatic degreasing unit, emulsion transfer tank, filtration unit, pipeline and electrical control unit, etc., of which the pipeline has a full trench, the full overhead pipeline and the combination of trench and overhead pipeline in three ways.

Auxiliary units:

1. Degreasing and oxygenation system

Oil-water separation is processed in the upper tank of the filter, which discharges the dirty oil that floats to the surface, and flows into the oil storage drum.

Micro air-floating oil-water separation device has oxygen-enriched aerating mechanism, uniformly mixed into the cutting fluid, can effectively inhibit the growth of anaerobic bacteria and accelerate the separation of floating oil, thereby extending the effective use of cutting fluid, reduce the cost of cutting fluid use.? 2. Cutting fluid temperature control system

If you need cooling temperature control, you can connect the refrigeration facilities. Refrigeration machine has a digital temperature controller can adjust the temperature setting value and real-time display of the actual temperature of the coolant, the refrigeration unit automatically run to make the coolant control in the process requirements of the temperature.

3, frequency conversion constant pressure water supply system

Multiple pumps in parallel frequency conversion speed control constant pressure water supply, the output power with the number of machine tools can be automatically adjusted to keep the system set pressure constant, to improve the stability of the system for the amount of liquid stability, and can save about 30% of the electrical energy.

4. Liquid supply system and liquid return system

Liquid supply pipe consists of the main pipe, branch pipe and output pipe, which can be fixed in the column overhead, or from the gutter, the output pipe through the valve and the hose will be sent to the machine tool cutting fluid. The machine solenoid valve controls the liquid supply or cuts off the liquid supply.

? Overhead return method: Dirty cutting fluid from the machine tool flows into the return tank through the outlet tank, and the return pump pumps the cutting fluid together with the abrasive chips and pumps it upward into the overhead return pipe to send it back to the filtering machine. The return pump is specially designed for the dirty cutting fluid back to the supporting pump, can be pumped impurity particles in the 15mm or so of the dirty liquid. The return tank is equipped with a float-type liquid level detecting device, which is detected by a sensor to detect the position change.

The gutter return method: the dirty cutting fluid from the machine tool flows into the gutter, and with the help of the gutter flushing fluid, the cutting fluid is returned to the filter together with the chips.

Here are the features of the centralized filtration system of Yantai Chengbo Machinery Technology Co.,Ltd:

The centralized filtration cooling system adopts a large circulation, large flow rate, and large stroke liquid return, the heat of the cutting fluid radiates quickly, the temperature of the liquid supply system is low, and there is an internal circulation in the stoppage period, so that the large flow rate of the cutting fluid can flow uninterruptedly, which can effectively inhibit the growth of the bacteria, and at the same time it is easy for the At the same time, it is also easy to realize automatic control of the performance index of cutting fluid to ensure the quality of cutting fluid. In addition, the centralized liquid supply also facilitates the centralized treatment of dirty liquid, protects the ecological environment and meets the requirements of environmental protection.