What is the general process for science and technology project application?
1. Obtain information.
2. Preliminary determination of project feasibility.
3. First understand the project guide, make a list of the materials to be prepared, and convene a meeting with relevant departments to coordinate the work content and time.
4. Prepare information.
5. Pay attention to relevant website announcements.
6. Successful application - project establishment - start-up meeting - communicate work details with the scientific research and financial departments, and timely assign financial data and mid-term reports on scientific research progress, etc.
8. Project acceptance - scientific research and financial preparation of audit materials.
9. Conclude the question - reward relevant personnel - archive the information.
Expand knowledge:
Project application refers to a series of preferential policies issued by government agencies for enterprises or other research units. Enterprises or related research units then prepare application documents according to government policies. Then apply according to relevant application requirements and procedures.
Projects that can be applied for include the national provincial and municipal funding plan system and various ministries and commissions funding plans such as the 863 Plan, the 973 Plan, the Science and Technology Small and Medium Enterprises Innovation Fund, the Special Fund for the Development of Small and Medium Enterprises, Enterprise Technology and New Technology, and the National Social Science Fund. Projects at different levels, such as the Science Fund, the National Autonomous Science Fund, the Provincial Social Science Fund, and the Provincial Autonomous Science Fund, have different application difficulties, and the qualifications and conditions of the applicants also vary.
Reference materials:
Technology Project_Baidu Encyclopedia
The basic conditions for intelligent manufacturing application are as follows:
(1) The project implementation unit is in It is registered in accordance with the law in Guangdong Province, has independent corporate legal personality, and has good operational and financial status.
(2) The project technology is at the leading domestic or internationally advanced level, and the equipment and systems used in the demonstration project are independent, safe and controllable.
(3) The project meets the specific requirements of the corresponding category in the "Guangdong Province Intelligent Manufacturing Pilot Demonstration Project Element Conditions".
(4) The project has achieved significant results in reducing operating costs, shortening product development cycles, improving production efficiency, reducing product defective rates, and improving energy resource utilization, and continues to improve, with good results. growth.
(5) The project’s intelligent manufacturing model has demonstration significance and promotion value in the entire industry. The project unit is willing to actively cooperate to summarize experience and promote the model.
(6) The project has been completed or basically completed and has achieved obvious results. Unfinished projects should be completed before December 2020.
How to register wearable products as medical devices
As a type of medical device, wearable medical devices are not much different from general medical devices in terms of registration and application process. , here is a brief introduction to the registration application process and issues that require your attention.
1
Classification
For medical device product classification, you can first query the classification catalog. If the product is not in the classification catalog, you need to go to the China Institute of Food and Drug Control website Carry out classification definition to determine product categories. Classification definition is generally based on the working principle, structural composition and intended use of the product. The category will not be changed simply because its usage is wearable.
However, it should be noted that the product category may change because the product is designed to be wearable and may change its working principle, usage method, product characteristics, etc., resulting in product category changes. For example, traditional electronic thermometers and sphygmomanometers are classified as 6820 general diagnostic equipment, while products with wearable structures are often classified as 6821 medical electronic instruments because their function is monitoring and the data is dynamic or continuous, which leads to changes in the intended use of the product.
2
Registration Test
After determining the product category, you can start the product registration test. Registration testing requires applying for registration testing based on the actual situation of the medical device. Generally, product prototypes, product technical requirements, instructions and labels are required. If there is software in the product composition, but the hardware loading the software is not in the structural composition, then when submitting for inspection, it is necessary to provide hardware facilities that support the operation of the software, such as platforms or mobile phones, computers, etc. that meet its special requirements. These devices The accessories will be sent for inspection together with the inspection.
At the same time, since wearable medical devices often come into contact with the human body for a long time, it is necessary to consider entrusting a testing laboratory to conduct biological tests to conduct biocompatibility research. For specific projects, please refer to GB/T16886.1 -2011, this part is a commissioned test.
3
Clinical evaluation
For Class II and III medical devices, clinical evaluation is required when registering and applying, and wearable medical devices are no exception. According to the requirements of the "Technical Guiding Principles for Clinical Evaluation of Medical Devices" and according to the actual situation of the product, the method of clinical evaluation is selected: applying for exemption from clinical trials, data obtained through clinical trials of the same type of medical device, or conducting clinical trials. It should be noted that for products that want to apply for clinical exemption, even if they meet the requirements of the clinical exemption catalog, they still need to submit a comparative statement between the applied product and the medical devices that have been approved for domestic registration in the "Catalogue".
"Comparison table between declared products and approved domestically registered medical devices in the catalog"
Comparison items
Medical devices in the catalog
Declaration Product
Differences
Support
Information overview
Basic principles (working principle/action mechanism)
Structural composition
Product manufacturing materials or manufacturing materials of parts in contact with human body
Performance requirements
Sterilization/disinfection method
Applicable Scope
Usage
4
Submit for registration approval and system assessment
When submitting for registration approval, submit it as a wearable medical device product The framework of registration information is no different from other products, it is still twelve main parts. We will further discuss the specific registration information reporting requirements in future articles, so stay tuned.
Ministry of Science and Technology: "Intelligent Robots" and other key special projects application guide released
A few days ago, the Ministry of Science and Technology website announced the "National Key R&D Program "Intelligent Robots" and other key special projects 2019 annual project application guide 》(referred to as Application Guide). The application guide shows that six key special projects including "intelligent robots" involve a total estimated state allocation of approximately 2.26 billion yuan. Among them, the total estimated state-appropriated funds for the "intelligent robot" key project are about 400 million yuan, the "modern service industry's leading key technology research and development and application demonstration" key project is about 300 million yuan, and the "integrated transportation and intelligent transportation" key project is about 300 million yuan. Key special projects of 170 million yuan, "Network Collaborative Manufacturing and Smart Factory" key projects of 680 million yuan, "Manufacturing Basic Technologies and Key Components" key projects of 450 million yuan, "Internet of Things and Smart City Key Technologies and Demonstration" key projects of 260 million yuan .
The "Intelligent Robot" key project covers four levels: basic cutting-edge robot theory, cutting-edge technologies, key technologies and equipment, and application demonstrations, focusing on basic cutting-edge technologies of smart robots, new generation robots, key * Deployment and implementation in six directions: innovative technology, industrial robots, service robots, and special robots. No less than 33 projects will be launched in 2019.
The key project of "Research and Development and Application Demonstration of Leading Key Technologies in Modern Service Industry" is based on the five directions of modern service science theory and key service core technologies. In the demonstration category, it is planned to set up 20 research directions in 2019 and arrange no less than 20 projects.
The "Integrated Transportation and Intelligent Transportation" key project has deployed 15 key research tasks in accordance with 6 technical directions including intelligent transportation infrastructure, intelligent collaboration of transportation vehicles, and transportation operation supervision and coordination. . In 2019, it is planned to launch 6-12 projects in 4 technical directions.
The "Network Collaborative Manufacturing and Smart Factory" key project in 2019 is planned to focus on core industrial software in the manufacturing industry, key technologies and solutions for smart factories, manufacturing enterprise network collaborative manufacturing platforms, integrated technologies and Application demonstration and other tasks will initiate no less than 38 projects.
The key project of "Manufacturing Basic Technology and Key Components" is deployed and implemented in five directions: key basic parts, basic manufacturing processes, advanced sensors, high-end instrumentation and basic technology support. No less than 28 projects are planned to be launched in 2019.
The "Internet of Things and Smart City Key Technologies and Demonstration" key project will launch 11 projects in 2019 with the main goal of promoting smart city integrated application demonstration and innovation and forming core and decisive key technology solutions. research tasks.
What are the conditions for the "New Generation Artificial Intelligence" major science and technology project in the key area R&D plan?
(1) The applicant must be a registered innovation entity in Guangdong Province (including enterprises and scientific research institutes) , universities, other public institutions and industry organizations, etc.), they should pay attention to the combination of industry, academia and research, and the integration of superior resources inside and outside the province; if the applicant is a university or institution in Hong Kong and Macao, it should be in accordance with the "Guangdong Provincial Department of Science and Technology, Guangdong Provincial Department of Finance on the Hong Kong Special Administrative Region" "Several Provisions on the Participation of Higher Education Institutions and Scientific Research Institutions in the Macao Special Administrative Region in the Organization and Implementation of Guangdong Provincial Fiscal Science and Technology Plans (Special Projects, Funds, etc.) (Trial)" (Guangdong Ke Noriazi [2019] No. 1) document spirit is included in the corresponding scope; application units For those from outside the province, the project review and project approval process will be treated equally with units within Guangdong Province in accordance with relevant regulations.
For applications led by units outside the province, after competitive review, the best ones will be included in the management of the science and technology plan project database; the projects included in the database will meet the requirements of scientific research institutions, scientific research activities, main teams to be implemented in Guangdong, and the project intellectual property rights are in Project approval support will be provided after conditions such as application in Guangdong and transformation of project results in Guangdong.
(2) Adhere to demand orientation and application orientation. Joint application by industry, academia and research institutes is encouraged. If the lead applicant is an enterprise, it should in principle be a high-tech enterprise or a leading backbone enterprise with an R&D institution, a major innovation platform at the national, provincial or ministerial level in this field, and a leading figure in this field. As project leader. Encourage increased investment in supporting funds. If an enterprise takes the lead in applying, in principle, no less than 70% of the total project investment will be self-raised; if a non-enterprise takes the lead in applying, in principle, no less than 50% of the total project investment will be self-raised (self-funded). Fund raising is mainly funded by the enterprises participating in the application). (3) Applicants for R&D plans in key areas of the province are generally not subject to the application limit on the number of ongoing research projects. Projects should rely on innovative units with significant advantages in this field, strengthen source coordination and integration of elements, and concentrate on technological research. The same unit or the same research team is not encouraged to spread its efforts and lead and participate in multiple project applications in the same project. Otherwise, it will be included in the scientific research integrity record and dealt with accordingly.
(4) The project leader should play a coordinating and leadership role, be able to substantively participate in the organization and implementation of the project, and prevent the phenomenon of recruiting high-end well-known experts in the field.
(5) The project content must be true and credible, and no exaggeration of its own strength, technical and economic indicators is allowed. Each applicant unit must be responsible for the authenticity of the application materials. They must implement the requirements of the "Several Opinions on Further Strengthening the Construction of Scientific Research Integrity" (Tingzi [2018] No. 23), strengthen the review and control of application materials, and prevent exaggeration, untruths, and even fraud. . Each applying unit and project leader must sign the "Letter of Commitment to the Authenticity of Application Materials" (the template can be downloaded from the Sunshine Government Affairs Platform system and must be stamped with the official seal of the unit). Once a project is approved, technical, product, economic and other assessment indicators will not be modified or adjusted without justifiable reasons.
(6) The applicant should carefully budget the funds, declare according to the actual situation, and comply with the relevant requirements of the application guide.
(7) The project leader or applicant unit under any of the following circumstances shall not apply or pass the qualification review:
1. The project leader has Guangdong Provincial Science and Technology Plan Project 3 More than one project (including 3 projects) has not been completed or some projects are overdue for one year and have not been completed (except for platform projects, universal policy projects, and post-subsidy projects);
2. The project leader has The major science and technology projects in progress in Guangdong Province and the R&D plan projects in key areas have not been completed and accepted (under such circumstances, the person in charge can still participate in the project application as a main participant);
3. At the provincial level Major irregularities were discovered during the audit and inspection of special fiscal funds;
4. Multiple or repeated declarations were made for the same project by changing the subject name;
5. The main content of the project has been The unit has applied alone or jointly with other units and has been approved by the provincial science and technology plan;
6. The project of the provincial unit has not been recommended by the science and technology department;
7. There is still a punishment Records of serious untrustworthy conduct in scientific research during the execution period and credit "blacklist" records in related social fields;
8. Violation of scientific research ethics.
(8) The application project must also meet the specific application conditions for each topic in the application guide.
The process of applying for a technology project, for example, includes application, acceptance, project establishment, etc.; there is also the general process of patent application
Technology project application process:
1. The applicant unit prepares the project application form and related materials according to the science and technology project guide;
2. The applicant unit submits the application form and related materials;
3. The Science and Technology Bureau organizes relevant Experts review and approve the applied projects;
4. The project establishment unit signs a project mission statement with the Science and Technology Bureau;
5. The project implementation unit organizes and implements the project in accordance with the requirements of the mission statement;
p>
6. After the project is completed, the implementing unit submits a project acceptance summary report;
7. The Science and Technology Bureau organizes the acceptance of the implemented project.
Patent application process:
(1) Application for invention patent
1. Invention patent application review and approval process: patent application - acceptance - preliminary examination - publication - substance Request for examination—substantive examination—authorization.
2. Documents required to apply for an invention patent: 1) Request letter: including the name of the invention patent, the name of the inventor or designer, the name and address of the applicant, etc. 2) Description: including the name of the invention patent, its technical field, background technology, invention content, description of drawings and specific implementation methods.
3) Claims: describe the technical features of the invention and clearly and briefly state the content sought for protection. 4) Drawings in the description: Invention patents often have drawings. If text alone is enough to describe the technical solution clearly and completely, there is no need for drawings.
(2) Utility model patent application
1. Utility model patent application approval process: patent application—acceptance—preliminary examination—announcement—authorization.
2. Documents required to apply for a utility model patent: 1) Request letter: including the name of the utility model patent, the name of the inventor or designer, the name and address of the applicant, etc. 2) Description: including the name of the utility model patent, its technical field, background technology, invention content, description of the drawings and specific implementation methods.
The content of the manual should be written in detail, and the technical content described should be able to be implemented by ordinary technicians in the technical field after reading it. 3) Claims: describe the technical features of the utility model and clearly and briefly state the content for which protection is sought.
4) Instructions and drawings: Utility model patents must be accompanied by drawings. 5) Abstract of the specification: clearly reflect the technical problem to be solved by the invention, the key points and main uses of the technical solution to solve the problem
(3) Application for appearance patent
1. Application The process of appearance patent: patent application-acceptance-preliminary examination-announcement-authorization.
2. Documents that need to be submitted for appearance patent: 1) Request letter: including the name of the appearance patent, the name of the designer, the name, title, address, etc. of the applicant. Design pictures or photos: at least two sets of pictures or photos (front view, rear view, top view, bottom view, left view, right view, and three-dimensional view if necessary) Brief description of the design: A brief description of the design should be submitted if necessary.
Extended information:
Patent application: An invention-creation must be filed by the applicant with the competent government department (in China, it is the State Intellectual Property Office of the People's Republic of China) Patent applications can only be obtained after being reviewed and approved by the State Intellectual Property Office of the People's Republic of China and the State Intellectual Property Office in accordance with legal procedures.
In China, inventions and creations include three types: inventions, utility models and designs. In the application stage, they are called invention patent application, utility model patent application and design patent application respectively. After being authorized, they are called invention patents, utility model patents and design patents respectively. At this time, the applicant is the patentee of the corresponding patent.
Reference materials:
Technology project application flow chart-Renshou County People’s Government patent application approval process-State Intellectual Property Office