High-flow melt-blown filter element filters are widely used and can be used for coarse filtration, intermediate filtration or fine filtration; the processing flow rate per unit filtration area is large, the filtration resistance is small, and the filtration efficiency is high; when achieving the same In terms of filtration effect, compared with equipment such as plate and frame fine filters, raw water pre-filters and fine filters, they have the advantages of lower investment costs, long service life and low filtration costs.
Material: SUS304, SUS316, SUS316L
Inflow method: side in and bottom out
Working pressure (MPa): 0.3~0.8
Maximum flow rate (m3/h): 20~40
Filter volume (liter, approx.): 33~40
Structure: top cover fixation method with four sets of M16 eye-bolts The filter can withstand extremely high filtration pressure and water hammer pressure impact.
Inlet and outlet diameter: 2″ (DN50) flange connection, 1/4″ exhaust valve/pressure gauge, liftable fixed bracket. Surface treatment electropolished inside and out.