2. Click to view the devices and printers in the control panel interface that appears.
3. In the device and printer interface that pops up, select the scanner and right-click the Start Scanning button.
4. At this point, you can make relevant settings, such as resolution and scanning format, in the scanning options that pop up, and then click the scan button.
5. At this time, you can see that the scanning of the scanner has entered, waiting for the scanning progress to be completed.
Extended data:
Notebook maintenance principles:
1. When the computer is not used for a long time, just turn off the power of the LCD screen temporarily through the function keys on the keyboard, which can save electricity and prolong the life of the screen.
2. Don't forcibly cover the LCD top cover, and don't put any foreign objects between the keyboard and the display screen, so as to avoid damaging the internal components by the heavy pressure on the top cover glass.
3. Don't touch the screen surface with nails and sharp objects (hard objects) to avoid scratches.
4. Dust will be adsorbed on the LCD surface due to static electricity. It is recommended to buy a special wiping cloth for LCD screen to clean your screen. Don't pat with your fingers to avoid leaving fingerprints, please wipe gently.
5. Don't wipe the screen with chemical cleaner.
battery
1. When there is no external power supply, if the card in the PCMCIA slot is not needed at that time, it is recommended to unplug the card first to prolong the battery life.
2. Room temperature (20-30 degrees) is the most suitable working temperature of the battery, and the working environment with too high or too low temperature will reduce the service life of the battery.
3. When the notebook computer can provide a stable power supply, it is incorrect to take out the battery to prolong its service life. As far as ASUS notebook computer is concerned, when the battery is low, the charging circuit in the battery will automatically turn off, so it will not be overcharged.
4. It is recommended to correct the battery charge once every three months on average.
5. When using the AC adapter, please refer to the international voltage instructions. "
{ad} keyboard
1. When accumulating dust, you can clean the gap with a small brush, or blow the dust out with a high-pressure spray can that is usually used to clean the camera lens, or use a hand-held vacuum cleaner to remove the dust and debris on the keyboard.
2, clean the surface, you can touch a little detergent on the soft cloth, gently wipe the keyboard surface in the case of power failure.
hard disc
3. Try to use it under stable conditions, and avoid operating the computer where it is easy to shake.
4. The power-on and power-off process is the most vulnerable time of the hard disk. At this time, the rotation speed of the hard disk bearing is not stable, and if vibration occurs, it is easy to cause track defects. Therefore, it is recommended to wait for about ten seconds after turning off the computer before moving the laptop.
5. Reorganize and scan the disk once a month on average to improve the efficiency of disk access.
Touch screen device
1. Please keep your hands clean when using the touchpad to avoid the cursor running around.
2. When the surface gets dirty accidentally, you can gently wipe the surface of the touchpad with the wet corner of a dry cloth. Don't wipe the surface with rough cloth and other objects.
3. Touch panel is an inductive precision electronic component. Please don't write on the touch screen with sharp objects, and don't use it under heavy pressure to avoid damage.
heat dissipation
Generally speaking, notebook computer manufacturers will use fans, heat pipes, large heat sinks and cooling holes to reduce the high temperature generated in use.
In order to save electricity and avoid noise, the fan of notebook computer is not always running, but will start when the CPU reaches a certain temperature.
3. Placing the notebook computer on soft objects, such as beds and sofas, may block the cooling holes and affect the cooling effect, thus reducing the operating efficiency and even crashing.