Oxygen therapy is no longer the patent of the hospital, oxygen inhalation does not necessarily have to go to the hospital to carry out. In the past, we can only go to the hospital to inhale oxygen, now there is a home oxygen machine, oxygen therapy can be carried out at home.
There are many types of oxygen machines on the market, the appearance of different designs, the following common Deda home oxygen machine as an example to illustrate, to share with you how to carry out the maintenance of the home oxygen machine and routine maintenance:
Cleaning of the shell
The shell of the home oxygen machine is usually cleaned once a month, cleaning the When you pay attention to the power supply should be disconnected to prevent electric shock. Scrub with a clean, soft cloth and a small amount of disinfectant slowly wipe the shell, be sure to pay attention to the shell of the gap do not let the water flow in.
Cleaning of the water tank
The purpose of the water in the tank is: to moisten the oxygen. In order to ensure the purity of the water, to avoid the bad quality of the water, affecting the purity of the oxygen, it is recommended: to clean the tank with white vinegar once a week to ensure the quality of the oxygen. The method of cleaning is very simple.
The first step: take out the water tank and open the rubber plug, add appropriate amount of white vinegar into the water tank.
Step 2: Fill the tank with water, rinse it out repeatedly and let it dry before using it again.
Replacement of Fuse Tube
Replacement of Fuse Tube of Home Oxygen Machine, which is also an important procedure for maintenance of oxygen machine, first of all, you must unplug the power cord first, cut off all the power supply, and then remove the old fuse and replace it with a new one and tighten it.
Cleaning of oxygen tubing
General home oxygen machine oxygen tubing should be cleaned every three days, oxygen tubing on the nose suction head should be cleaned every time after use, can be soaked in 5% potassium permanganate solution for 5 minutes and then washed with water, or wiped with medical alcohol. It is recommended that the oxygen tube be replaced every 2 months. It should be noted that the oxygen absorbing tube should be kept dry and there should be no water droplets.
Cleaning of intake filter
Cleaning of intake filter has a protective effect on the compressor and molecular sieve of our oxygen machine, and it can also prolong the service life of the machine, so please clean or replace it in time.
Step 1: Wiggle up and down to remove the air intake filter. Note: It is at the lower left corner of the back of the machine.
Step 2: Turn the filter opening upward, sleeve the faucet tightly, and use the water flow to flush out the clogged dust.
Step 3: Install the dried filter back into the body. Note: If the filter is not dried, it will damage the molecular sieve, the main component of the oxygen machine.
Cleaning of the water trap
The water trap is an integral part of the oxygen absorber tube, and its main function is to intercept the excess water transported by the oxygen machine. Suggestion: clean it once a week with white vinegar, so as to avoid deterioration of the water trap, which will affect the quality of oxygen.
Cleaning method:
Rotate left and right to unscrew the water accumulator, pour off the accumulated water, add the appropriate amount of white vinegar to clean, rinse with water, dry and load back can be.
Summary
Generally speaking, when carrying out the cleaning and maintenance of the home oxygen machine, it is best to read the instruction manual of the oxygen machine, and have a more comprehensive understanding of the oxygen machine before you start to clean and maintain the home oxygen machine, so that the cleaning will be more convenient.