When selecting silicone hose, should be based on the specific application and select the appropriate silicone hose, fittings and silicone hose assembly, consider the factors are: the type of silicone hose, silicone hose size, silicone hose length, the working pressure of the system, the system's fluids and the use of the environment, the selection of the product standards, please refer to.
Silicone tube assembly of the buckled silicone tube has a variety of fittings, should be based on different types of silicone tubing to choose different fittings. Note: Silicone tube is divided into two types of silicone tube need to peel the outer rubber and do not need to peel the outer rubber two types of joints are also different, need to peel the outer rubber type of joint set of grooves should not be too sharp, otherwise it will damage the reinforced layer of the silicone tube. Correctly snapped fittings are essential to the safety and normal operation of the silicone tube assembly. There are many types of joints, to choose the appropriate joints, the design of the joint sleeve should be standardized and reasonable, sharp grooves, non-standardized dimensions will buckle off the steel wire reinforcement layer. Joints should be buckled according to the inner diameter and outer diameter of the silicone tube to determine the amount of buckling.