Single-axis diameter gauge is a testing equipment made for the outer diameter detection, it has the function of outer diameter measurement, overdifference prompting and control, it is installed in the production line of RV cable line, to ensure that the product's outer diameter size is produced within the standard.
Measuring function
Single-axis calibrator detects by photoelectric principle, non-destructive non-contact measurement, no internal wearing parts, can be used continuously for a long time, long maintenance cycle. With adjustable bracket, easy to adjust the height, so that the measured RV cable line through the measurement area near the center.
Overdifference tips
RV cable wire sizing instrument real-time measurement of the outer diameter size, when the measured size is in line with the standard, sizing instrument display in green font, when the measured value exceeds the upper and lower limits, the small red light, the buzzer sounds, the data on the display interface changes to red font. Multiple ways to inform the staff.
Control function
Only measure without control, will still produce part of the scrap, so the diameter gauge added control function, using PID closed-loop control method, the actual measurement of the time control, each test data will give a control signal to let the outside diameter close to the nominal value, through the control function, can reduce the wire diameter fluctuations, can be a further reduction in the scrap rate.