The centralized feeding system is designed for the production of plastic products in the injection molding workshop, realizing uninterrupted unmanned continuous molding operations. The variety of raw materials and the combination of multi-color materials can be changed as needed to realize the automation of the coloring process.
The system can regenerate and use the injection nozzle cold material in a fully automatic manner. It can control all feeding equipment and prevent the occurrence of blockage in the storage silo. It achieves full automation by setting up a centralized monitoring station. .
The installation process of the central feeding system:
1. The size of the accurate position of the machine.
2. Pipe drainage method.
3. Raw material room and system control placement planning.
4. Observe the wall structure of the factory building to determine whether it can bear the weight of the pipeline.
5. When installing brackets, pay attention to the crane, ceiling, and columns.
6. The central supply pipe should be used to minimize bends.
7. The pipe height should be controlled to about 3 meters if conditions permit, which facilitates installation and subsequent maintenance.
8. When connecting steel pipes, ensure that the pipe clamps are docked in the center.
9. Air leakage in pipelines is strictly prohibited.
10. The length of the connection between the pipe cutting section and the central feeding cup is about 3-4 meters.
11. When installing pipelines, pay attention to the alignment of the injection molding machine's separate pipes. Misalignment will affect the appearance.
The central feeding system adopts microcomputer centralized automatic control to realize 24-hour continuous feeding operation of pellets. Multiple small microcomputers control the coloring process of each molding machine respectively, with accurate measurement and uniform mixing, and can flexibly change colors to meet the requirements for multi-color and multi-variety products. Flexibly change the feed volume according to the production volume of different molding machines