What should be tested for charger GS certification?

Introduction to GS GS means German "Geprufte Sicherheit" (safety has been certified) and also means "German safety". GS certification is a voluntary certification based on the German Product Safety Law (GPGS), which is tested according to the European Union unified standard EN or the German industrial standard DIN, and is recognized as a German safety certification mark in the European market. What products can apply for GS certification? Products that can apply for GS certification are: 1, household appliances, such as refrigerators, washing machines, kitchen utensils and so on. 2. Household machinery. 3. sporting goods. 5. Electrical and electronic office equipment, such as photocopiers, fax machines, shredders, computers, printers, etc. 6, industrial machinery, experimental measuring equipment. 7. Other safety-related products, such as bicycles, helmets, ladders and furniture. [Edit this paragraph] GS safety certification mark 1. GS mark is a safety certification mark issued by TUV, VDE and other institutions authorized by the German Ministry of Labor. GS mark is a safety mark accepted by European customers. General GS certified products have higher unit price and are more popular. 2. EU * * * body CE regulation 1997. 1. 1. "LVD" should be controlled. GS has included all the requirements of "Low Voltage Command (LVD)". Therefore, TUV will issue the CE certificate (COC) of the product LVD free of charge after obtaining the GS mark. TUV Sü ddeutsche Zeitung and TUV Rheinland 1997 and later certificates will include the LVD certificate in the GS certificate. The manufacturer obtained LVD certificate while applying for GS. 3.3 requirements. GS certification of products and documents:-Products must pass the type test of European safety standards. -The product structure should meet the standard requirements. -Instructions (in German and English) should meet the standards. -English documents such as structural drawings, circuit diagrams and parts lists prepared according to TUV requirements, and product tests will be conducted according to the parameters provided by these documents. 4.GS certification has strict requirements on the quality assurance system of the factory, and the factory should be reviewed and inspected every year:-The factory is required to establish its own quality assurance system according to the ISO9000 system standard when it is shipped in batches. The factory should at least have its own quality control system, quality records and other documents as well as sufficient production and inspection capabilities. -Before issuing the GS certificate, the new factory should be inspected and qualified before issuing the GS certificate. -After issuing the certificate, the factory should receive at least 1 inspection every year. No matter how many products the factory applies for TUV mark, the factory review only needs 1 time. [Edit this paragraph] GS certification body (1) German certification body: Generally, the well-known GS certification bodies in Germany include TUV SUD (called TUV Sü ddeutsche Zeitung in China, also called TUV PS), TUV Rheinland, VDE, etc., all of which are directly recognized by Germany. (2) Other certification bodies: Generally, other GS certification bodies cooperating with Germany in Europe include SGS, KEMA, ITS, NEMKO, DEMKO, etc. [Edit this paragraph] GS certification scope 1, household appliances, such as refrigerators, washing machines, kitchen utensils, etc. 2. Household machinery. 3. sporting goods. 4. Household electronic equipment, such as audio-visual equipment. 5. Electrical and electronic office equipment, such as photocopiers, fax machines, shredders, computers, printers, etc. 6, industrial machinery, experimental measuring equipment. 7. Other safety-related products, such as bicycles, helmets, ladders and furniture. [Edit this paragraph] First meeting of GS certification process 1): Through the first meeting, the testing agency or agency will explain the specific certification procedures and related standards to the applicant's product engineer, and provide the required documents and forms. 2) Application: Applicants should submit documents that meet the requirements. For electrical products, it is necessary to submit general assembly drawing, electrical schematic diagram, bill of materials, product use or installation instructions, series model difference instructions and other documents. 3) Technical meeting: After checking the applicant's documents, the testing organization will arrange a technical meeting with the applicant's technicians. 4) Sample test: The test will be carried out according to applicable standards, and can be carried out in the manufacturer's laboratory or any laboratory of inspection institutions stationed in various countries. 5) Factory inspection: GS certification requires safety-related scheme inspection on the production site. 6) issue GS certificate. [Edit this paragraph] GS certification cycle Generally speaking, the length of time depends on whether the product needs to be modified or the speed at which the manufacturer submits the required product documents. Generally speaking, it takes about 6 to 8 weeks. [Edit this paragraph] GS certification fee includes one-time certification fee, factory inspection fee and annual certification fee. The specific quantity will be determined according to the product category and required testing. The certification body will provide you with price reference after receiving the required documents submitted by the applicant. The market policy and credibility of each certification body are different, and the price will be different. [Edit this paragraph] The relationship between GS and LVD * * EC stipulates that "LVD" is controlled from 1997. 1.65438. GS has included all the requirements of "Low Voltage Command (LVD)". Therefore, TUV will issue the CE certificate (COC) of the product LVD free of charge after obtaining the GS mark. TUV Sü ddeutsche Zeitung and TUV Rheinland 1997 and later certificates will include the LVD certificate in the GS certificate. The manufacturer obtained LVD certificate while applying for GS. [Edit this paragraph] Inspection requirements of GS certified factory 1 and quality management 1 Is there a management organization responsible for product quality independent of production, and the name of the person in charge? 1.2 Is the training plan for all kinds of personnel formulated and implemented, especially for key technical personnel? What is the personnel appraisal system? 1.3 Ratio of quality management personnel to production personnel. 1.4 is there a production record for the key process of the product, and is there a serial number for the product packaging? If not, there is a quality problem. How to find out the defective products? 1.5 did the warehouse management and production operators carry out relevant inspections: 1.5. 1 raw materials 1.5.2 production process 1.5.3 finished products 1.6? Who is in charge? 1.7 Whether to hold quality analysis meetings regularly, deal with quality problems in time, and do a good job of feedback. 2. Production line of certified products 2. 1 Is there a production flow chart and quality control point chart of certified products and a clearly defined production system? 2.2 There is no maintenance system, regular inspection system and records for the equipment, instruments and quantity on the production line. 2.3 Whether there are key production equipment, process equipment and test equipment, and their accuracy, and provide relevant lists. 3. Raw materials, purchased parts and spare parts 3. 1 provides the catalogue of key parts and materials. 3.2 Explain how to ensure the quality of raw materials, purchased parts and spare parts (whether there are inspection specifications for spare parts and raw materials). Whether there is a receiving and storage system. 4. Is there a measurement mechanism for measuring 4. 1? 4.2 Scope of work and personnel profile of measurement institutions (whether they pass the assessment of measurement departments? ) 4.3 If there is no measuring organization, please explain what unit is used. 5. Factory testing organization 5. 1 List the names and manufacturers of main testing equipment, and what tests can be carried out with or without certificate of conformity and valid appraisal certificate (accuracy and grade). 5.2 Test environment. Technical documents and data 6. 1 product drawings and product technical conditions and process documents. 6.2 Test report of products applying for certification in the last six months. 6.3 Percentage of waste products and defective products detected in the past six months to the total output. 7. What is the record and user evaluation of technical service 7. 1? [Edit this paragraph] The materials to be submitted for GS certification are 1, application form 2, general agreement 3 and parts list-fill in the standard format of parts list provided by our center-this list includes product model, manufacturer, part number and related parameters (current, voltage, power, flame retardant grade, etc. All parts of). -For components with safety certification, such as power cord, plug, switch, thermostat, safety tube, etc. Please provide a copy of the European certification certificate. -If safety-related parts are not certified, please provide technical parameters, including product model, manufacturer, rated current, voltage, working temperature, etc. So that we can conduct random tests. 4. For the parts that come into contact with food (if any), please provide the food hygiene license issued by the authority for this material (plastic, paint, etc.). ) .5. The nameplate shall be in German, screen printed or pasted on the designated part of the product according to the samples provided by us. 6. If necessary, our center can provide you with the circuit diagram for free. 7. Please mark the actual size on the circuit board drawing. 8. If necessary, our center can provide paid translation services for German instructions. 9.2-4 final samples/models (prepared according to the requirements of our center). 10, explosion diagram (explosion diagram) [Edit this paragraph] What is the meaning of the ce mark? The significance of ce mark is that CE abbreviation, as a symbol, indicates that the product with CE mark meets the essential requirements of relevant European directives, and is used to confirm that the product has passed the corresponding conformity assessment procedures and/or the manufacturer's conformity declaration, and truly becomes a passport for the product to enter the European market. Industrial products with CE mark are required by relevant directives, and those without CE mark shall not be put on the market for sale. Products with CE mark that have been put on the market and are found not to meet the safety requirements shall be ordered to withdraw from the market. Those who continue to violate the relevant CE mark provisions of the directive will be restricted or prohibited from entering the EU market or forced to withdraw from the market.