1. Replacement of cartridges: respirator cartridges are a kind of consumables, need to be replaced regularly. In general, the replacement cycle of the cartridge is 3-6 months, depending on the frequency of use and environmental conditions. When replacing the cartridge, you need to close the inlet and outlet of the tank first, then remove the cartridge, clean the inside of the tank, and install a new cartridge.
2. Cleaning the cartridge: If the cartridge is not used for a long time, but the water quality is poor, you can consider cleaning the cartridge. When cleaning the cartridge, you need to remove the cartridge first, rinse it with water, then sterilize it with alcohol or bleach, and finally dry it before installing it back.
3. Disinfect the tank: Regular disinfection of the tank can effectively kill bacteria and viruses, to ensure the safety of water quality. Disinfection, you need to empty the tank of water, and then disinfected with disinfectant or bleach solution, disinfection time is generally about 30 minutes. After disinfection, it needs to be rinsed with water to ensure that the residual amount of disinfectant does not exceed the national standard.
4. Regular inspection: Regularly check the status of the tank and cartridge, timely detection of problems and processing, can effectively extend the service life, to ensure the safety of water quality. When checking, you need to pay attention to whether the cartridge is broken or deformed, whether there is a strange odor or sediment in the tank and other issues. If there is any problem, it needs to be replaced or cleaned in time.
In short, the treatment of water for injection and purified water storage tank respirator cartridge needs to be selected according to the actual situation, to ensure the safety of water quality and normal operation of the equipment.