1 Purpose for the standardization of construction equipment and machinery management, control of construction equipment, machinery and equipment injuries, to avoid setting up construction equipment and machinery in the process of use and maintenance of hazards and impacts, especially the development of this provision. 2 Scope of the provisions of this provision applies to the ********** Ltd. 100,000 tons per year of production capacity of 1,4-butanediol project contracted by the China Chengda Engineering Company Limited. 3 Equipment and machinery of the site inspection 3.1 Equipment in this document refers to all general equipment such as generators, welding machines, electrical equipment, fire extinguishers, etc. used for construction and special equipment such as cranes, lifting equipment, lifting rigging, forklift trucks, loaders, pressure vessels, etc. 3.2 Machines and tools in this document refer to all hand-held tools such as air-welding tools, electric tools, hand tools, sanding machines and drills used for construction.3.3 Equipment and tools introduced by the project department will be inspected by the project department before entering the site. HSE management group is responsible for the inspection. 3.4 The equipment and machineries of subcontractors are self-inspected by subcontractors before entering the site, and the HSE management group of the project department is responsible for the inspection of special equipments before using them. 3.5 For the inspection of special equipments, it is required to provide the relevant certificates issued by the state, and the appearance and performance inspection is carried out by the professional personnel. 3.6 Qualified equipments are labeled with qualified labels and allowed to be used, while the unqualified equipments are prohibited to be used. 3.7 For equipment installed and assembled on site, it can be carried out by entering the construction site for inspection. Assembled special equipment can be used only after qualified inspection by HSE management group of project department. The lifting equipment installed on site shall be used only after it is inspected and accepted by the HSE management group of the project department, and shall also be inspected and accepted by the relevant state departments.4 Safety Requirements for Construction Equipment and Machineries4.1 Construction equipment and machineries entering the construction site must be kept in perfect condition, with complete, sensitive, and reliable safety devices, and the technical label of the machinery number is complete and clear with certificate of conformity and instruction manual, and the special equipment and transportation 4.2 The installation and dismantling of tower cranes and material hoists must be undertaken by qualified professional teams, and the operation should be carried out according to targeted installation and dismantling programs, and the technical test and acceptance should be carried out according to the regulations after the completion of the installation and after being inspected by the competent government departments, the company will obtain the "Safety Inspection Pass" certificate. "4.3 Safety operation regulations shall be hung in the obvious parts of on-site construction equipment and machineries or in the machine shed. 4.4 The construction equipment and machineries of subcontractors shall be used in accordance with the requirements of their efficacy, and the equipment and machineries lacking safety devices or having malfunctioned or failed shall not be used. 4.5 It is strictly prohibited to dismantle the automatic control mechanisms, torque limiters and other safety devices, and monitoring, indicating, and safety devices on the equipment and machineries. safety devices, and monitoring, indicating, instrumentation, alarms and other automatic alarm and signaling devices. Its debugging and troubleshooting should be carried out by specialized personnel. It is strictly prohibited to repair, maintain or debug the machinery in operation.4.6 The equipment and machineries should be maintained on time, and their use should be stopped when they are found to be without maintenance or overloaded and operating with disease.4.7 The operators of the equipment and machineries should be in good health and have passed the professional training and examination, and can only operate them independently after obtaining the operation certificates issued by the relevant departments and the operation certificates of the special types of work. 4.8 The operator has the right to refuse to carry out the instruction that violates the safety operation regulations.4.9 When the construction equipment and machineries are in operation, the operator should keep the field of vision open, and shall not leave the workstation without authorization or deliver the construction equipment and machineries to the operator who is not the operator of the machine for operation. It is strictly prohibited for unrelated personnel to enter the operation area and operation room. When working, the mind should be concentrated, and it is strictly prohibited to operate under the influence of alcohol.4.10 Operators and cooperating operators are required to wear labor protection articles according to the regulations, and the long hair shall not be exposed.4.11 The operation team shall implement the handover system for the operation of the equipment and machineries for two shifts and above. Operators shall carefully fill in the shift handover records.4.12 When working in places where there are impediments to the safety of equipment, machinery and personal life and health, operators must be equipped with applicable safety precautionary protection items, and the equipment and machinery shall be equipped with appropriate safety measures.5 Inspection of equipment and machinery5.1 All equipment and machinery entered into the site by the project and subcontractors must be in a safe operating condition. They shall be inspected once a month after they start to be used, and the qualified ones shall be replaced with the color code of the month, marked as shown in the table below, and the unqualified ones shall be cleared out of the site, and the HSE Management Department of the project shall supervise the inspection. Equipment and machinery inspection color code schedule color schedule inspection month red January May September blue February June October yellow March July November green April August December
5.2 All construction equipment and machinery to be in accordance with the manufacturer's specifications, installation and operation. All repair work should be carried out in accordance with the manufacturer's specifications. 5.3 maintenance, certificates and inspection, records should be kept up to date, and should be readily available for inspection. 5.4 special equipment inspection: a variety of lifting machinery, construction plant equipment before entering the site must be tested by the project department of equipment experts, after passing the issuance of the "equipment license" 5.5 Sub-contractors in the self-inspection after passing, to the project HSE management department to submit the following information: 5.5.1 equipment factory certificate copy; 5.5.2 truck cranes, buses should provide vehicle exercise certificate; 5.5.3 cranes should be provided with municipal special equipment inspection agency inspection reports and government departments issued by the certificate of conformity of the safety inspection; 5.5. 5.5.4 Driver's license and ID card of the driver, crane operator should provide crane operation certificate issued by government departments; 5.5.5 Relevant insurance information. 5.6 All kinds of certificates should provide the original for inspection, and the project HSE management department will keep copies.
For more information on engineering/service/procurement tender writing and production, to improve the winning rate, you can click on the bottom of the official website customer service free consultation:/#/?source=bdzd